B.Tech. in Mechanical Engineering
4.2 /5
- A NAAC accredited
- Private Institute
- Estd. 2007
B.Tech. in Mechanical Engineering at Amrita Sai Institute of Science and Technology Overview
B.Tech. in Mechanical Engineering
at Amrita Sai Institute of Science and Technology
At the UG level, Amrita Sai Institute of Science and Technology provides a 4 years B.Tech. in Mechanical Engineering course to the students. To get admission to this course, aspiring students must meet the minimum eligibility requirements - 45.0% in 12th. The total cost for this course is INR 172000. This course offers admission to 30 students. Check out other courses available under B.E. / B.Tech at Amrita Sai Institute of Science and Technology.
Duration | 4 years |
Course Level | UG Degree |
Mode of Course | Full Time |
Total Tuition Fees | ₹1.72 Lakh |
Official Website | Go to Website |
Seat breakup | 30 |
Type of University | Private |
B.Tech. in Mechanical Engineering at Amrita Sai Institute of Science and Technology Fees
B.Tech. in Mechanical Engineering
at Amrita Sai Institute of Science and Technology
Fee components | Amount (4 years) |
---|---|
Tuition fee is calculated on the basis of 1st year/semester. Actual amount may vary.
The fees might include components other than tuition fees.
Mentioned fee is as per AP EAPCET. | ₹ 1.72 Lakh |
₹ 1.72 Lakh |
These are based on information available on various sources. Latest values may differ.
B.Tech. in Mechanical Engineering at Amrita Sai Institute of Science and Technology Placements
B.Tech. in Mechanical Engineering
at Amrita Sai Institute of Science and Technology
Top Recruiters for Amrita Sai Institute of Science and Technology
Accurate Steel Forging
Collabera
Dell
Good Through Software Solutions
Infosys
Infoview
MAINTEC
Ocwen Financial Solutions
Oppo
polaris
Sutherland
Wipro
B.Tech. in Mechanical Engineering at Amrita Sai Institute of Science and Technology Entry Requirements
B.Tech. in Mechanical Engineering
at Amrita Sai Institute of Science and Technology
General
B.Tech. in Mechanical Engineering at Amrita Sai Institute of Science and Technology Admission Process
B.Tech. in Mechanical Engineering
at Amrita Sai Institute of Science and Technology
- CounsellingAdmission is through counselling based on the rank obtained in Andhra Pradesh Engineering, Agriculture and Medical Common Entrance Test (AP EAMCET).
B.Tech. in Mechanical Engineering at Amrita Sai Institute of Science and Technology Cutoffs
B.Tech. in Mechanical Engineering
at Amrita Sai Institute of Science and Technology
3
Gender
Quota
Category
AP EAMCET round-wise cutoff Rank: (General-All India)
Round | 2017 | 2018 | 2019 |
---|---|---|---|
1 | 136813 | 126757 | 128357 |
Explore Courses offered by Amrita Sai Institute of Science and Technology
Select the Degree you are Interested in
Select the Stream you are Interested in
Other courses offered by Amrita Sai Institute of Science and Technology
Get best suited colleges for you in real-time
Here’s how it works:
Share your preferences with our assistant
Tell us about your city, course, budget & more
Get recommendations in no time
Discover best colleges that meet all your needs
It won’t take more than a minute!
Read B.E. / B.Tech reviews from Amrita Sai Institute of Science and Technology
Read ReviewsN
NANCHARLA SAIRAM
B.Tech. in Mechanical Engineering - Batch of 2020
Offered by Amrita Sai Institute of Science and Technology
5
5Placements5Infrastructure5Faculty5Crowd & Campus Life5Value for Money
Good studies & discipline
Placements: Digital library, Best computer labs, works shops in mechanical branch are good.
The college system is good, the communication of students and staff is very good, Management support to students, best facility, highly educated people always support us.
Infrastructure: Infrastructure is good, c blocks are available, fresh air environment, big classrooms, best digital laboratories, research centers, a detailed review of one of the most important skills in academic research information sinking in particular I enjoyed a lot.
Faculty: Facility students communication is good, faculty teach good, to support new ideas to how to make students lively etc. Faculty teach morals, values, ethics. Great course for the people who are new to research. This course provide an overview of the course and various components.
Other: Mechanical course is better than other courses, very hard but there is a future
Reviewed on 26 Mar 2020Read More
GB
Gopichand Boshetti
B.Tech. in Mechanical Engineering - Batch of 2018
Offered by Amrita Sai Institute of Science and Technology
3.2
1Placements4Infrastructure4Faculty4Crowd & Campus Life3Value for Money
I'm not satisfied with this college as there are no placements for mechanical students.
Placements: MNCs don't visit the college for mechanical engineers, but small scale industries offer placements to them. None of the students in my batch got placements from this college. Companies like Tata, etc., visited the college and offered the roles of production engineers, etc. Almost 100% of the students got internships with some fare workshops. The college has a placement cell, but it works for other branches.
Infrastructure: The college provides Wi-Fi facility. Labs in the mechanical branch are good. We have a central library, and there are twenty shells. We have a ground for playing volleyball, cricket, kabaddi, long jump and high jump. Quality of food provided is average. Medical facilities are available on the campus.
Faculty: Some of the faculty members in the college are helpful. Non-technical faculty are also available in my department. According to me, teaching is good for students who study sincerely. The college gives a lot of freedom for students to enjoy. Student to faculty ratio is 30:1.
Other: The college celebrates Engineer's Day on September 15th every year. We have an off-campus project expo on this day. ASSIST Aahwan fest, annual day and extracurricular activities are conducted in March every year.
Reviewed on 7 Feb 2019Read More
VP
venkatesh periumallu
B.Tech. in Mechanical Engineering - Batch of 2017
Offered by Amrita Sai Institute of Science and Technology
4.4
5Placements4Infrastructure4Faculty4Crowd & Campus Life5Value for Money
Good placements in 2017. Good faculty.
Placements: The campus recruitment training is designed to help the students in their preparation for on-campus or off-campus recruitment. The highest salary offered is 5.4 lakhs and the lowest salary offered is 1.5 lakhs per annum. Many companies visited my college like Maintec, Oreng, Flipkart, Effaotranics, etc. Maximum students were selected in many companies.
Infrastructure: The college library is very spacious and is equipped with 2238 tittles, 9871 volumes,48 international journals and 46 national journals. There are very good and comfortable classrooms. The college has the most versatile campus with various activities and sports events conducted throughout the year.
Faculty: The faculty is very good and friendly. Some faculty members have completed their Ph.D. and some have completed their M. Tech. The ratio of students to faculty is 10:1. The course curriculum is as per JNTU. Good teaching methods are used.
Other: This college has about 2100 students, more than 200 faculty members and around 150 technical and supporting staff. The hallmark of the campus is the good facilities which cater to the academic and extra circular interests of the students.
Reviewed on 22 Mar 2017Read More
VP
vivek pendli
B.Tech. in Mechanical Engineering - Batch of 2017
Offered by Amrita Sai Institute of Science and Technology
4.6
5Placements5Infrastructure5Faculty5Crowd & Campus Life3Value for Money
Good placements in the year 2017.
Placements: Campus requirement training is designed to help the students in their preparation for on-campus or off-campus placements. The highest salary offered is 5.4 lakhs and the lowest salary offered 1.5 lakhs per annum. Many company HRs visited my college like Maintec, Oreng, Flipkart, Effaotranics etc. Maximum students are selected in the companies.
Infrastructure: The college library is very spacious. It is equipped with 2238 titles, 9871 volumes, 48 international journals and 46 national journals. Very good classrooms and very comfortable. The campus is the most versatile campus. Various activities and sports events conducted throughout the year.
Faculty: Very good and friendly faculty in the college. Some faculty members have completed their PhDs and some faculty members have completed M.tECH. The ratio of students and faculty is 10:1. The course curriculum is as per JNTU Kakinada. Good teaching methods are used.
Other: This college has about 2100 students, more than 200 faculty members and around 150 technical and supporting staff. The hallmark of the campus are the good facilities which cater to the academic and extra curricular interests of the students.
Reviewed on 22 Mar 2017Read More
AK
anil kumar
B.Tech. in Mechanical Engineering - Batch of 2017
Offered by Amrita Sai Institute of Science and Technology
3.8
4Placements5Infrastructure3Faculty5Crowd & Campus Life2Value for Money
Good placements in 2017 and really good infrastructure.
Placements: The campus requirement training is designed to help students in their preparation for the recruitments through on-campus or off-campus.
In this year, the maximum number of students are selected by various companies in our college. The highest salary offered is 5.5 lakhs per annum and the lowest salary offered is 1.5 lakhs per annum.
Infrastructure: In this college, the library is very spacious and equipped with 2238 titles, 9871 volumes and 48 national journals.
The lunch break is usually understood as the moment one escapes from the class, is usually welcomed by one and all and the should be reflected in the architecture. The campus at Amrita Sai is the most versatile campus with various activities and sports events conducted throughout the year.
A fully-fledged transport department functions in the college with buses to provide transport facility to students and faculty members from various places.
Faculty: In this college, the faculty members are friendly with the students. They are experienced with good teaching skills.
The course curriculum is followed as per JNTU Kakinada university.
Reviewed on 17 Mar 2017Read More
View All 5 Reviews
Compare Courses From Similar Colleges
Similar courses in the same city
₹3.08 L
Overall Rating4.1
₹2.9 L
Overall Rating4.0
₹2.86 L
Overall Rating4.0
B.Tech. in Computer Science and Engineering
Offered by Siddharth Institute of Engineering and Technology (SIETK)₹1.72 L
Overall Rating3.7
₹1.72 L
Overall Rating4.2
₹8.08 L
Overall Rating3.9
₹40 K
Overall Rating– / –
B.Tech. in Computer Science and Engineering
Offered by Vignan's LARA Institute of Technology & Science₹1.72 L
Overall Rating4.2
₹1.72 L
Overall Rating4.0
B.Tech. in Mechanical Engineering
at Amrita Sai Institute of Science and Technology
Student Forum
Anything you would want to ask experts?
Write here...B.Tech. in Mechanical Engineering at Amrita Sai Institute of Science and Technology News & Updates
B.Tech. in Mechanical Engineering
at Amrita Sai Institute of Science and Technology
Latest
Popular
View all News & Updates
B.Tech. in Mechanical Engineering at Amrita Sai Institute of Science and Technology Contact Information
B.Tech. in Mechanical Engineering
at Amrita Sai Institute of Science and Technology
Address
Near Vijaywada, NH-9
Amrita Sai Nagar, Paritala, Kanchikacherla(MD), Krishna (Dt)
Bathinapadu, Andhra Pradesh
Andhra Pradesh - Other ( Andhra Pradesh)
Phone
Go to College Website ->
Useful Links
Know more about Amrita Sai Institute of Science and Technology
- All About Amrita Sai Institute of Science and Technology
- Courses 2025
- Fees 2025
- Reviews on Placements, Faculty & Facilities
- Admission 2025 - Cutoffs, Eligibility & Dates
- Placement - Highest & Average Salary Package
- Cut off & Merit List 2025
- Infrastructure Details & Reviews
- Amrita Sai Institute of Science and Technology Faculty
- Compare Amrita Sai Institute of Science and Technology
- Amrita Sai Institute of Science and Technology Q&A
- Amrita Sai Institute of Science and Technology News & Articles
Know more about Programs
- Engineering
- Mechanical Engineering
- B Tech (Bachelor of Technology)
- Instrumentation Technology
- Food Technology
- Aeronautical Engineering
- Artificial Intelligence and Machine Learning
- Metallurgical Engineering
- MTech in Computer Science Engineering
- VLSI Design
- Petroleum Engineering
- Aerospace Engineering
- BTech in Biotechnology Engineering
- Pharmaceutical engineering
- Silk Technology