Diploma in Plastic Technology
3.8 /5- Public/Government Institute
- Estd. 1968
Diploma in Plastic Technology at Central Institute of Plastics Engineering and Technology, Ahmedabad Overview
Diploma in Plastic Technology
at Central Institute of Plastics Engineering and Technology, Ahmedabad
Diploma in Plastic Technology at Central Institute of Plastics Engineering and Technology, Ahmedabad is a 3 years course offered at the After 10th level. The total tuition fee for Central Institute of Plastics Engineering and Technology, Ahmedabad Diploma in Plastic Technology is INR 91500. The course offers admission to 90 students. Check other courses of Central Institute of Plastics Engineering and Technology, Ahmedabad After 10th Diploma.
Duration | 3 years |
Course Level | After 10th Diploma |
Mode of Course | Full Time |
Total Tuition Fees | ₹91,500 |
Official Website | Go to Website  |
Seat breakup | 90 View full breakup |
Type of University | Public/Government |
Diploma in Plastic Technology at Central Institute of Plastics Engineering and Technology, Ahmedabad Fees
Diploma in Plastic Technology
at Central Institute of Plastics Engineering and Technology, Ahmedabad
| Fee components | Amount (3 years) |
|---|---|
₹ 91,500 | |
₹ 91,500 |
These are based on information available on various sources. Latest values may differ.
Diploma in Plastic Technology at Central Institute of Plastics Engineering and Technology, Ahmedabad Highlights
Diploma in Plastic Technology
at Central Institute of Plastics Engineering and Technology, Ahmedabad
- Course is approved by Gujarat Technological University, Ahmedabad
Diploma in Plastic Technology at Central Institute of Plastics Engineering and Technology, Ahmedabad Entry Requirements
Diploma in Plastic Technology
at Central Institute of Plastics Engineering and Technology, Ahmedabad
CIPET JEE
- N/A
Other eligibility criteria
Candidate must have passed 10th with Maths, Science, and English
Must have valid rank in JEE Mains
Diploma in Plastic Technology at Central Institute of Plastics Engineering and Technology, Ahmedabad Admission Process
Diploma in Plastic Technology
at Central Institute of Plastics Engineering and Technology, Ahmedabad
- Register and ApplyInterested candidates can apply online/offline with required information.
- Merit ScreeningAdmission is based on the marks obtained in in Central Institute of Plastic Engineering & Technology JEE Mains (CIPET JEE).
Diploma in Plastic Technology at Central Institute of Plastics Engineering and Technology, Ahmedabad Seats
Diploma in Plastic Technology
at Central Institute of Plastics Engineering and Technology, Ahmedabad
90
Total Seats Available| Break-up by category | Seats |
|---|---|
| OBC | 24 |
| SC | 15 |
| ST | 6 |
| PH | 2 |
Explore Courses offered by Central Institute of Plastics Engineering and Technology, Ahmedabad
Select the Degree you are Interested in
Select the Stream you are Interested in
Other courses offered by Central Institute of Plastics Engineering and Technology, Ahmedabad
60
- – / –
– / –
– / –
View Other 5 Courses
Get best suited colleges for you in real-time
Here’s how it works:
Share your preferences with our assistant
Tell us about your city, course, budget & more
Get recommendations in no time
Discover best colleges that meet all your needs
It won’t take more than a minute!
Read After 10th Diploma reviews from Central Institute of Plastics Engineering and Technology, Ahmedabad
Read Reviews
O
Om Chapani 
Diploma in Plastic Technology - Batch of 2022
Offered by Central Institute of Plastics Engineering and Technology, Ahmedabad
3.6
4Placements4Infrastructure3Faculty3Crowd & Campus Life4Value for Money
Good placement in 2022, labs and workshops are better than any of the college in this field.
Placements: Almost everyone got placements in our 2022 batch. The placement cell is also supportive. Nothing to worry much about placement but one thing to keep in mind is that you will get placements according to your knowledge. If you are not enough knowledgeable then you will get a salary package accordingly.
Infrastructure: The infrastructure of our college is good and all the necessary equipments are available. Labs are superb. All the equipments are working fine and they let you operate the equipments. Workshops also have the necessary machines of different processes. The main process machines are working but some process machines are not in a working condition but it is available for you to observe.
Faculty: There are knowledgeable faculty but they don't teach you passionately. They are not willing to make you a knowledgeable student if you don't ask the question. Faculty members will not teach you on their own. You have to ask the questions and they'll give you satisfactory answers.
Other: There are not many events but there is lots of machinery if you are willing to learn than you can.
Reviewed on 15 Jun 2022Read More
K
kumar aditya
Diploma in Plastic Technology - Batch of 2022
Offered by Central Institute of Plastics Engineering and Technology, Ahmedabad
4
4Placements4Infrastructure4Faculty3Crowd & Campus Life5Value for Money
There are really good infrastructure and placements. This college is the best for a diploma.
Placements: Our college provides very fine placements to overall 95% of students. Last year the highest salary package offered was 2.92 LPA, and the lowest salary package offered was 1.35 LPA. We got jobs in companies like Adani, Amul, Lohia, Finolex and many more. In a diploma in plastic technology, you will get jobs as a junior testing engineer.
Infrastructure: Our campus is quite huge, and there are different buildings for diploma, B.Tech and short term courses. Our college has Wi-Fi but not for students, and it is secured with a password. Our classrooms and labs are fine. There is an accommodation capacity of 120 students in every classroom. Classrooms are well lit and airy, and we use the whiteboard. There are also projectors in every classroom. Teachers are provided with different personal laptops for teaching. The hostel is also huge and sprawled over a total of 8 floors. In every room, about 3 students stay in the hostel. There is also a small balcony in our rooms, and there are 3 lockers and 3 wardrobes in each room. Moreover, a table, a chair and a bed are provided to you. There is no huge ground but enough to play volleyball and badminton. Sometimes we also play cricket there. The mess is moderate, and you have to pay Rs. 2,500 per month and get breakfast, lunch and dinner.
Faculty: The teachers in our college are highly qualified, and many of them are PhD holders. Their teaching quality is quite good, but you will feel it boring in the first year because in the first year you have to study physics, chemistry and maths. So, you are under the junior teachers, and you will feel like a 9th or 10th standard student. However, from the second year, your teachers would be great. Our college has almost everything to make us ready for the industry. It depends on you how to grab the opportunity. I suggest you not to miss even a single practical.
Other: I chose a diploma instead of an intermediate because the money charged for both courses is almost the same. Intermediate can't offer me any job or job guarantee. I don't want any type of improvement, and I feel everything is good. Every year a cultural programme, Garba and Dandiya night, are organised. Our college arranges visits to plastic related events. Scholarships are provided by the state where students reside.
Reviewed on 22 Jun 2021Read More
S
SHIBU NADAR
Diploma in Plastic Technology - Batch of 2019
Offered by Central Institute of Plastics Engineering and Technology, Ahmedabad
4.2
5Placements4Infrastructure4Faculty4Crowd & Campus Life4Value for Money
It is the best college for a diploma in plastic engineering.
Placements: I am from the 2020 batch of the DPT course. It is the best college as compared to others. In our course, 100% of the students got placed from our batch, and the average salary package offered was around 1.5 to 3 LPA. Top recruiting companies were Adani, Sterlite and Amul. DPT is one of the best courses offered in our college. Placement facilities are the best.
Infrastructure: The hostel is very good. A new big hostel building is inaugurated a few months before. Mess and canteen are very bad and not worth for money. Food quality is very bad. A doctor is appointed in the hostel by management for students. Sports and games are not conducted by our college.
Faculty: Teachers were very helpful and friendly. Teaching quality is very good with a good infrastructure of class. In our college, students can gain lots of practical knowledge because different types of machines are available. The course makes students ready for the industry. Teaching is the best, and they also give practical knowledge of machines.
Other: I wish event and sports activities should be conducted more.
Reviewed on 30 May 2021Read More
AJ
ankit jain
Diploma in Plastic Technology - Batch of 2018
Offered by Central Institute of Plastics Engineering and Technology, Ahmedabad
3.4
4Placements3Infrastructure4Faculty3Crowd & Campus Life3Value for Money
CIPET is the best option to get a job in the plastic industry.
Placements: The placements in our college are good. 100% placements are provided in Diploma courses. All the courses in CIPET are good. CIPET, Bhopal is the best as per my knowledge. The college provides many opportunities for the students to go abroad like Dubai, the USA, etc., to work for various companies. The average salary offered in the last year was Rs. 15,000 per month. The placements offered for the students of the previous batch were good. Most of the plastic companies visit the college to offer placements.
Infrastructure: All the classrooms are smart classrooms. Wi-Fi facility is available for faculty, but not for students. Medical facilities are not available. Sports facilities are not good for students as well as for faculty. The quality of labs and classrooms is good. There is no canteen even. Hostel facilities are available for new batches.
Faculty: The faculty in our college are helpful and well-qualified. The teaching methods followed were the same as CIPET, Chennai. Students also get practical experience from the college. Many courses like DPT (diploma in plastic technology), DPMT (diploma in plastic mould technology) and others are offered in the college.
Other: The college organises annual function every year. The campus is good. Scholarship facilities are provided by the government, not by the institution. Sports day and Hindi Divas are celebrated. Avoid pollution act and other extracurricular activities are conducted.
Reviewed on 24 Jun 2018Read More
SK
Satyendra Kumar
Diploma in Plastic Technology - Batch of 2016
Offered by Central Institute of Plastics Engineering and Technology, Ahmedabad
4.2
5Placements4Infrastructure4Faculty4Crowd & Campus Life4Value for Money
This is a good institute for students to do diploma in plastic engineering.
Placements: The Institute of CSTS provides 100% placement. It also provides perfect training for placements. Mainly non-government companies such as Finetool Pvt. Ltd., Lumax Pvt. Ltd., Motherson Pvt. Ltd., etc., visit the college every year. Institute provides granted placements.
Infrastructure: All classrooms are well-designed with optimising sun lights and air circulation. All classrooms have a laptop, projector and mike. The teachers teach us in an innovative manner to make a student learn and understand. They show videos and animation for the students to understand.
Faculty: All the faculty teach us well, but North Indian students face language problems. Everything is managed by the faculty and students. They provide an 18-day semester break. All teachers are well qualified and experienced to teach us in a proper way.
Other: Every year, the college celebrates an annual function, farewell, freshers party and some local festivals such as Ayudha puja, etc. We get a lot of fun with sports.
Reviewed on 5 Jun 2018Read More
View All 11 Reviews
Compare Courses From Similar Colleges
₹2.1 L
Overall Rating– / –
– / –
Overall Rating– / –
– / –
Overall Rating– / –
₹1.01 L
Overall Rating– / –
₹35.61 K
Overall Rating– / –
– / –
Overall Rating– / –
– / –
Overall Rating– / –
₹35.61 K
Overall Rating– / –
₹1.81 L
Overall Rating– / –
Similar courses in the same city
₹1.44 L
Overall Rating– / –
₹1.2 L
Overall Rating3.7
3.7– / –
Overall Rating4.4
4.4₹3 K
Overall Rating4.4
4.4₹94.5 K
Overall Rating– / –
₹1.25 L
Overall Rating– / –
₹1.29 L
Overall Rating– / –
Discontinued May (2024)-Diploma in Mechanical in Manufacturing Technology
Offered by Gujarat Technological University– / –
Overall Rating– / –
₹1.1 L
Overall Rating– / –
Diploma in Plastic Technology
at Central Institute of Plastics Engineering and Technology, Ahmedabad
Student Forum
Anything you would want to ask experts?
Colleges in AhmedabadCentral Institute of Plastics Engineering and Technology, AhmedabadCoursesDiploma in Plastic TechnologyDiploma in Plastic Technology at Central Institute of Plastics Engineering and Technology, Ahmedabad News & Updates
Diploma in Plastic Technology
at Central Institute of Plastics Engineering and Technology, Ahmedabad
Latest
Popular
UPASANA PRADHAN · Dec 11, 2024
33.2K views · 1 comment
Satyendra Singh · Dec 11, 2024
3.5L views · 10 comments
Mamona Majumder · Dec 11, 2024
32.8K views
Diploma in Plastic Technology at Central Institute of Plastics Engineering and Technology, Ahmedabad Contact Information
Diploma in Plastic Technology
at Central Institute of Plastics Engineering and Technology, Ahmedabad
Address
Plot No. 630, Phase-IV,
GIDC, Vatva,
Ahmedabad
Ahmedabad ( Gujarat)
Phone
Email
Go to College Website ->
Useful Links
Know more about Central Institute of Plastics Engineering and Technology, Ahmedabad
- All About Central Institute of Plastics Engineering and Technology, Ahmedabad
- Courses 2025
- Fees 2025
- Reviews on Placements, Faculty & Facilities
- Admission 2025 - Cutoffs, Eligibility & Dates
- Placement - Highest & Average Salary Package
- Cut off & Merit List 2025
- Infrastructure Details & Reviews
- Central Institute of Plastics Engineering and Technology, Ahmedabad Faculty
- Compare Central Institute of Plastics Engineering and Technology, Ahmedabad
- Central Institute of Plastics Engineering and Technology, Ahmedabad Q&A
Know more about Programs
- Engineering
- Instrumentation Technology
- Food Technology
- Aeronautical Engineering
- Artificial Intelligence and Machine Learning
- Metallurgical Engineering
- MTech in Computer Science Engineering
- VLSI Design
- Petroleum Engineering
- Aerospace Engineering
- BTech in Biotechnology Engineering
- Pharmaceutical engineering
- Silk Technology
- Microelectronics
- Agriculture & Farm Engineering