5 Photos
Central Institute of Tool Design Admission 2025: Details & Updates
- Public/Government Institute
- Estd. 1968
Central Institute of Tool Design AdmissionsWhat’s new?
Admissions are open at Central Institute of Tool Design for the academic session 2024-26.
Central Institute of Tool Design Admissions
Table of content
- Central Institute of Tool Design Students review
Central Institute of Tool Design Admission Process 2024
Central Institute of Tool Design admission is merit based for programmes offered at UG, PG, Certificate, and After 10th levels. In total, the institution offers 39 courses to the students across various streams, such as Engineering and IT & Software, among others. Amid all these courses, some of the popular Central Institute of Tool Design courses offered at the UG level include After 10th Diploma and at the PG level, the institution provides, PG Diploma and M.E./M.Tech, etc. Students interested in Central Institute of Tool Design admission 2024 must check the fees and other details below:
- Central Institute of Tool Design Fees: The overall tuition fees charged for UG courses range between INR 44,700 and the total tuition fees for PG courses range between INR 60,000 - INR 154,500. In addition to the tuition fees, students might also be required to pay application, exam and other fee components. Please note that this fee information is obtained from the official website/ sanctioning body but is subject to change.
- Central Institute of Tool Design Course Duration: The duration for UG courses provided by Central Institute of Tool Design is 3 years and the same for PG courses is 2 years.
Central Institute of Tool Design PG Diploma Admission 2025
4 courses 18 months
Central Institute of Tool Design provides a Full Time PG Diploma with a duration of 18 months. To grab a seat at Central Institute of Tool Design PG Diploma, candidates are required to complete the eligibility and selection criteria set by the university. The total tuition fee charged by the institution for this course is INR 60,000-76,500.
200
₹ 60K - 76.5K
Central Institute of Tool Design Certificate Admission 2025
27 courses 1 month - 4 years
Central Institute of Tool Design offers Certificate course of 1 month to 4 years duration. The institute offers Certificate in Mechanical Engineering and Pro E, among other specialisations. Candidates must fulfil the minimum eligibility criteria to apply for Certificate courses at Central Institute of Tool Design.
₹ 18K - 49K
Central Institute of Tool DesignAfter 10th Diploma Admissions 2025
Central Institute of Tool Design
After 10th Diploma Admissions 2025
4 courses 3 years
240
₹ 44.7K - 1L
Eligibility Criteria
- Accepting Exams: CBSE 10th, TS SSC
Central Institute of Tool Design M.E./M.Tech Admission 2025
4 courses 2 years
Central Institute of Tool Design offers 2 years M.E./M.Tech course spread across 4 semesters. The institute offers M.E./M.Tech in various specialisations, such as Mechanical Engineering and Mechatronics Engineering, etc. The total fee charged for the course at Central Institute of Tool Design is INR 1,34,000-1,54,500.
99
₹ 1.3L - 1.5L
Recommended Colleges
Explore admissions in popular similar colleges
Students who showed interest in Central Institute of Tool Design - PG Diploma also showed interest in
Wardha
₹3.1 K - 5.05 K
Also preferred by students
Want better recommendations?
There is a 90% more chance of getting best college recommendations by sharing preferences.Meerut
₹31.5 K - 1.06 L
Also preferred by students
Delhi
₹15.5 K - 20 K
Also preferred by students
View allCollections
Is this recommendation relevant?
Central Institute of Tool DesignStudents Ratings & Reviews
Placements4
Infrastructure3.7
Faculty & Course4
Campus Life3.9
Value for Money4What students say about Central Institute of Tool Design
Placements
Infrastructure
Faculty
Other
LikesView All
The college has good placements from different companies like Wipro, BHEL, etc.
Based on 12 Reviews
A
Anonymous
Diploma in Tool Die and Mould Making - Batch of 2023
4.4
4Placements5Infrastructure4Faculty4Crowd & Campus Life5Value for Money
It is not easy and not really worth the time and effort.
Placements: Dtdm students gets 100% placements, cuz you will spend your 4th year training an any company, which is your internship. Most of the time you will be get the offer to continue in the company after your completion of course, about mostly everyone will opt out to higher education. Some continue tho. When comes to package know if should call that cuz just stipend. The highest stipend offered to my batch was around 19k from skyroot aerospace and they got an offer to continue with good increment. We also got tata and for our succeding batch tata took like 40 students. You will start as a trainee and in most cases do helping jobs so do not expect much from these internships.
Infrastructure: I would Definetly say CITD has more than enough facilities compared to any other Polytechnic college. You got really big workshop other Polytechnic colleges do not even have one. Multiple cncs, lathes, milling machines. Library is also great. Hostels are okay too not bad not. Mess Food is something comment on cuz was a dayscholar and canteen contact always keeps changing. But form what heard it was not that good. When it comes to sports. No sports,. Nothing.
Faculty: Faculty was really great when joined most of them were qualified but to the end of my course most of them left still there are some good ones. And course curriculum is definitely relevant but insanely hard to cope for a student who just finished his 10 and is just 15-16 years old. So really be carefull before joining semester exams are really difficult you have to score 50% marks to pass the exam and just to tell you how hard the course is nearly 70% of students (sometimes more) get a backlog in any subject for every semester. There will be 20 (including lab and theory) subjects each from second year. So really think before joining.
Other: Even tho it sounded like a positive review would still say not to join this course because it is not easy or worth your time. If you take other courses okay, because you get to experience pretty good campus life.
Reviewed on 28 Sep 2023Read More
A
Anonymous
Diploma in Electronics & Communication Engineering (DECE) - Batch of 2022
2.4
1Placements2Infrastructure3Faculty5Crowd & Campus Life1Value for Money
I am not satisfied with this college but the infrastructure is good.
Placements: After completing the syllabus assessment, no classes were conducted, and we got leisure hours. Placements were not offered in this college. Internships or training were also provided. This college scammed people.
Infrastructure: The infrastructure was good. The food quality was not good. Laboratory classes were not conducted properly. Hostels were not clean. They offered expired products.
Faculty: Teachers were not well-qualified. The teaching skills were not good. They were also not helpful. They did not speak English. They speak Telugu. We prepared ourselves so that we never faced difficulty during semester exams. Teachers made students fail. The pass percentage was 60%.
Other: Events and extracurricular activities were not conducted. The teaching was only limited to every exam.
Reviewed on 26 Jan 2023Read More
D
D Karthik
Diploma in Automation and Robotics - Batch of 2021
4.2
4Placements4Infrastructure5Faculty4Crowd & Campus Life4Value for Money
It is a good college for a diploma in automation and robotics.
Placements: Placements were good for all the courses, especially DTDM, DARE, DECE, and DPE. The lowest salary package offered was 2.6 LPA to 3.2 LPA, which was good for diploma students.
Infrastructure: In terms of infrastructure, the college was good compared to other diploma colleges. It had good hostels with good rooms. It had a library and machinery. It had good labs and classrooms. It had a green garden.
Faculty: Faculty members were good. They were very helpful in clearing up the subject-related doubts. The course curriculum was good and well-prepared. The exam fee was Rs. 1000. There were internal and external exams every semester. There were a total of six to eight semesters.
Other: This college was good, and it provided scholarships to students every year. There were a total of 4 courses, and each course duration was 4 to 3 years.
Reviewed on 30 Oct 2022Read More
S
Soyam Sandeep
Diploma in Tool Die and Mould Making - Batch of 2022
4.6
5Placements5Infrastructure4Faculty4Crowd & Campus Life5Value for Money
Joining this college is a really good opportunity.
Placements: Students must get around 50% in the entrance exam. 75,000 is the highest salary offered in the tool design course. A lot of companies offer placements. Many companies offer jobs after completing this course.
Infrastructure: Good hostel facilities are available in this college. A canteen is available near the hostel. Good water facilities and 24-hour electricity are available. The classrooms, labs and a library are available nearby. Out passes are provided during holidays. Attendance is mandatory.
Faculty: The faculty members are helpful and guide us in subjects and also about our goals. They help every student well. Exams are held to test students' knowledge. The faculty are good and cooperative.
Other: Scholarships are available.
Reviewed on 22 Aug 2022Read More
L
Lokesh Muttineni
Diploma in Tool Die and Mould Making - Batch of 2020
4
4Placements4Infrastructure4Faculty4Crowd & Campus Life4Value for Money
I am satisfied, with the good placements, infrastructure, and facilities.
Placements: Every student gets placed in a company as a part of an internship which can be further continued. Almost 100% placement assurance is provided but only for internships, we get opportunities in the companies related to the course like production and design. The average package offered for the internship will be 1.5 LPA approximately.
Infrastructure: The infrastructure for this course is best here It is the only place in Telangana to do this course and all the facilities are great. Labs are excellent with all the equipment required also the library facility is very good with a good environment, the hostel is provided only for the first year and there is a canteen facility with minimal charge.
Faculty: Well-experienced teachers help us to learn theoretically as well as practically which increases the chance of better understanding. Exams are a good student has to work hard for the semester and the pass percentage is 60%, this course makes students industry ready if one does it perfectly.
Other: Unknowingly don't go for the course, the only choice, if you are interested as it is a part of mechanical engineering high earning, isn't possible in starting placements.
Reviewed on 30 Jun 2022Read More
M
Manish nethas
Diploma in Electronics & Communication Engineering (DECE) - Batch of 2022
3.6
3Placements3Infrastructure4Faculty3Crowd & Campus Life5Value for Money
Good campus placement offers are there with good companies .
Placements: Being a trainee is like getting a first internship, and the college does provide internships in good company like Samsung. The students are satisfied with the placements, the packages may be limited and they are available only for toppers.
Infrastructure: Only the food is unsatisfactory. Water and other facilities are average, along with the good sanitation. The beds are of high quality and the environment is good at hostels. There is a large space provided and the playground is also there.
.
Faculty: The faculty is good. The classrooms are excellent with digital boards available, they are neat and clean, the benches are comfortable too. Faculty members are highly educated.
Other: Freshers event id conducted and every festival related events are conducted along with quiz competitions.
Reviewed on 10 Feb 2022Read More
View All 29 Reviews
Central Institute of Tool Design
Student Forum
Anything you would want to ask experts?Answered 3 months ago
{Source: After 10th Diploma students & alumni}
Pursuing After 10th Diploma at Central Institute of Tool Design
Based on the reviews and feedback from students and alumni, here's a summary of whether it's worth pursuing a Diploma in Tool Die and Mould Making (DTDM) at Central Institute of Tool Design:
Pursuing After 10th Diploma at Central Institute of Tool Design
Based on the reviews and feedback from students and alumni, here's a summary of whether it's worth pursuing a Diploma in Tool Die and Mould Making (DTDM) at Central Institute of Tool Design:
A
Atul Mishra
Beginner-Level 1
Answered 4 months ago
{Source: After 10th Diploma students & alumni}
Course Curriculum at Central Institute of Tool Design
The course curriculum at Central Institute of Tool Design is structured in a way that it prepares students for the industry. Here's what students and alumni have to say:
* Relevant curriculum: Students
Course Curriculum at Central Institute of Tool Design
The course curriculum at Central Institute of Tool Design is structured in a way that it prepares students for the industry. Here's what students and alumni have to say:
* Relevant curriculum: Students
A
Atul Mishra
Beginner-Level 1
Answered 4 months ago
{Source: After 10th Diploma students & alumni}
Success Rate of Placement Cell for After 10th Diploma Students
Based on the reviews and feedback provided by students and alumni, here's a summary of the success rate of the placement cell for after 10th Diploma students at Central Institute of Tool Desi
Success Rate of Placement Cell for After 10th Diploma Students
Based on the reviews and feedback provided by students and alumni, here's a summary of the success rate of the placement cell for after 10th Diploma students at Central Institute of Tool Desi
A
Atul Mishra
Beginner-Level 1
Answered 8 months ago
The fees range for courses offerred by the Central Institute of Tool Design is around INR 18000 - INR 154500.
A
Atul Mishra
Beginner-Level 1
Answered 8 months ago
Central Institute of Tool Design has been rated 4.09 for Faculty as per the Shiksha verified reviews by students. This represents that Institute has decent, qualified and experienced faculty members.
A
Atul Mishra
Beginner-Level 1
Content authored by:
Jiya Tyagi
Updated on Dec 7, 2023
Central Institute of Tool DesignTake a look at Campus
Computer Lab
Lab
Administration Block
Classroom
Seminar HallCentral Institute of Tool Design News & Updates
Latest
Popular
Anum Ansari · Dec 12, 2024
31.7K views · 2 comments
Anum Ansari · Dec 11, 2024
2.1M views · 12 comments
Anum Ansari · Dec 11, 2024
8.6L views · 14 comments
Anum Ansari · Dec 11, 2024
1M views · 3 comments
Central Institute of Tool DesignContact Information
Address
Bala Nagar Chaurastha, Narsapur X Road, Hyderabad, Telangana
Hyderabad ( Telangana)
Phone
04027496178
(For general query)
04023772748
(For admission query)
Email
citdplacements@citdindia.org
(For general query)
citdmarketing2@gmail.com
(For admission query)
Go to College Website ->
Is it worth pursuing After 10th Diploma at Central Institute of Tool Design?