Government College of Technology (GCT) Coimbatore Answered Questions

The TNEA 2024 cutoff is available to candidates on the official website, tneaonline.org. After each counseling round, the authority will revise the TNEA 2024 cutoff. The minimum score needed to be admitted to participating institutes is TNEA cutoff 2024. Candidates will be considered for admission if their scores exceed the TNEA 2024 cutoff. The TNEA cutoff will change depending on the program and category. The TNEA cutoff calculator allows students to estimate their likelihood of admission. Tamil Nadu Engineering Admission 2024, which is based on class 12 grades, will determine admission to the TNEA participating institutes.The cutoff for previous year was released by GCT which was based on the TNEA rankings, This year cutoffs would be similar to the previous years but there is no such confirmation from the college till now. Thank you for reaching out.

According to the college's official website, you should have an aggregate of 60% marks in class 12th and must have given the TNEA exams, further:Undergraduate Program: The single window system is used for admission to all undergraduate programs. Reservations are made for BC, MBC, DNC, SC, ST, and other categories in accordance with Tamil Nadu government regulations. Additionally, reservations are offered to athletes, veterans, physically disabled people, and other state candidates.Post Graduate Program: Anna University, Chennai-25 has been designated by the Government of Tamil Nadu as its nodal agency for the conduct of Tamil Nadu Common Admissions through single window counseling for M.E. / M.Tech. This nomination was made in G.O. (D) No. 17, Higher Education (J2) Department, dated 24.01.2013. All postgraduate programs, including the Masters of Engineering (M.E.) program, need admission through the Anna University Single Window System. Reservations are made for BC, MBC, DNC, SC, ST, and other categories in accordance with Tamil Nadu government regulations. GATE/TANCET are mandatory for the admissions.

The various Courses provided by the College are: Full-Time Undergraduate Program: Civil Engineering B.E.  Mechanical Engineering B.E.  Engineering B.E. in Electrical and Electronics  B.E. Production Engineering; B.E. Electronics and Communication Engineering  B.E. in Instrumentation and Electronics Engineering  B.E. in Engineering & Computer Science  B.Tech Industrial Biotechnology B.Tech Information Technology  Part-time Undergraduate Program : Civil Engineering B.E.  Mechanical Engineering B.E.  Engineering B.E. in Electrical and Electronics  B.E. in Communication and Electronic Engineering  Full-Time Postgraduate Program: Structural Engineering, M.E. Environmental Engineering, M.E.  Masters of Geotechnical Engineering  Engineering Design M.E.  Master of Engineering in Manufacturing  Thermal Engineering, M.E.  Power Systems Engineering, M.E.  Drives & Electronics M.E. Power  Applied Electronics M.E.  VLSI design for M.E.  M.E. in Engineering and Computer Science PhD Program (Part-Time & Full-Time):Civil Engineering Engineering in Mechanical Systems Electronic and Electrical Engineering Engineering for Electronics and Communications Production Engineering in Computer Science and EngineeringIndustrial Biotechnology Information Technology Electronics and Instrumentation Engineering

The GCT college stands out in the terms of placements.According to the Alumni's reviews of the college on shiksha.com:ALUMNI-1: As of February, over 50% of the students in the department of civil engineering were employed by different businesses. Aarbee Structures has the lowest package, 2.5 LPA, and Shoba Construction has the biggest package, 13.1 LPA. Top businesses offering this training include Aquagreen, Technip, L&T, and Shoba Construction. The highest-level positions are Surveyor and Site Engineer, and students are first employed as Graduate Engineer Trainees (GET). ALUMNI-2: Placements: Over 95% of the students in our batch have been placed. The average compensation package offered is between 4 and 5 LPA, with the highest salary package being 14 LPA. Prominent hiring firms that come to our campus include Bosch, Zoho, and others. Numerous students secure internships. Placements for aspiring software engineers are made possible by seniors who actively provide helpful placement training.Hope it Helps!  

Candidates can get the TNEA 2024 cutoff on the official website, tneaonline.org. The TNEA 2024 cutoff will be modified by the authorities following each counseling cycle. The TNEA cutoff 2024 is the minimal score required for admission to participating institutes. Candidates whose scores surpass the TNEA 2024 threshold will be given consideration for admission. The program and category will determine the TNEA threshold. Students can calculate their chances of being admitted using the TNEA cutoff calculator. Admission to TNEA member institutes will be determined by the Tamil Nadu Engineering Admission 2024, which is based on class 12 grades. An aggregate of 50% in class 12th and must have given the TNEA exam are the reqirements to be eligible to sit in the counselling process.The previous year's GCT cutoff list revealed the following CUTOFFS for a number of B.Tech branches:Courses2023Cutoff By Rank2022Cutoff By Rank2021Cutoff By RankBE Computer Science and Engineering17171883868BE Electronics & Communication Engineering543324969474BE Electrical and Electronics Engineering13367454014125BE Electronics and Instrumentation Engineering1520354403388BE Civil Engineering215541448714315BE Production Engineering21699143308642B.Tech Industrial Biotechnology221641448311169BE Mechanical Engineering224391390912942   

The Government College of Technology (GCT) is located in the center of Coimbatore and stands proudly as one of Tamil Nadu's premier engineering institutions with a strong history of providing high-quality engineering and technology education. The college has a wide range of B.Tech programs such as computer science and engineering, mechanical engineering, civil engineering, electrical and electronics engineering; these programs include a diverse spectrum. In addition to GCT's learned faculty members, the college also has advanced facilities — which students can make use of in well-equipped labs — to ensure learning is more practical than theoretical. GCT highly regards its partnerships with industry stakeholders through which students gain exposure to real-world experiences via internships and projects. This academic wealth can only be found at this prestigious institution located within the folds of Coimbatore's charm.GCT has a strong track record of providing placement opportunities, with numerous reputable organizations holding recruiting drives on campus. Additionally, the college offers training courses and career counseling to assist students in getting ready for aptitude exams and interviews. 

Computer Science and Engineering course at GCT Coimbatore is a 4-year UG level course. Going to B.E. For admission to the Computer Science and Engineering course at GCT, Coimbatore, applicants must fulfill the admission requirements - 12th 45.0%. The total tuition fee for Computer Science and Engineering course at GCT Coimbatore B.E. is INR 200,000. The course has a capacity of 60 students.Duration4 yearsCourse LevelUG DegreeMode of CourseFull TimeTotal Tuition Fees2.00 LakhOfficial WebsiteGo to WebsiteSeat breakup60Type of UniversityPublic/GovernmentThe college boasts a nirf ranking of 160. Hope it helps!

The B.Tech programme is the most famous course offered by the Government College of Technology, for which a student must have an aggregate of 50% marks in class 12th and should have given the TNEA exam. Further, the other courses offered by the college are:Full-Time Undergraduate Program: Civil Engineering B.E.  Mechanical Engineering B.E.  Engineering B.E. in Electrical and Electronics  B.E. Production Engineering; B.E. Electronics and Communication Engineering  B.E. in Instrumentation and Electronics Engineering  B.E. in Engineering & Computer Science  B.Tech Industrial Biotechnology B.Tech Information Technology  Part-time Undergraduate Program : Civil Engineering B.E.  Mechanical Engineering B.E.  Engineering B.E. in Electrical and Electronics  B.E. in Communication and Electronic Engineering  Full-Time Postgraduate Program: Structural Engineering, M.E. Environmental Engineering, M.E.  Masters of Geotechnical Engineering  Engineering Design M.E.  Master of Engineering in Manufacturing  Thermal Engineering, M.E.  Power Systems Engineering, M.E.  Drives & Electronics M.E. Power  Applied Electronics M.E.  VLSI design for M.E.  M.E. in Engineering and Computer Science PhD Program (Part-Time & Full-Time):Civil Engineering Engineering in Mechanical Systems Electronic and Electrical Engineering Engineering for Electronics and Communications Production Engineering in Computer Science and EngineeringIndustrial Biotechnology Information Technology Electronics and Instrumentation Engineering

The B.Tech programme is the most famous course offered by the Government College of Technology, for which a student must have an aggregate of 50% marks in class 12th and should have given the TNEA exam. Further, the other courses offered by the college are:Full-Time Undergraduate Program: Civil Engineering B.E.  Mechanical Engineering B.E.  Engineering B.E. in Electrical and Electronics  B.E. Production Engineering; B.E. Electronics and Communication Engineering  B.E. in Instrumentation and Electronics Engineering  B.E. in Engineering & Computer Science  B.Tech Industrial Biotechnology B.Tech Information Technology  Part-time Undergraduate Program : Civil Engineering B.E.  Mechanical Engineering B.E.  Engineering B.E. in Electrical and Electronics  B.E. in Communication and Electronic Engineering  Full-Time Postgraduate Program: Structural Engineering, M.E. Environmental Engineering, M.E.  Masters of Geotechnical Engineering  Engineering Design M.E.  Master of Engineering in Manufacturing  Thermal Engineering, M.E.  Power Systems Engineering, M.E.  Drives & Electronics M.E. Power  Applied Electronics M.E.  VLSI design for M.E.  M.E. in Engineering and Computer Science PhD Program (Part-Time & Full-Time):Civil Engineering Engineering in Mechanical Systems Electronic and Electrical Engineering Engineering for Electronics and Communications Production Engineering in Computer Science and EngineeringIndustrial Biotechnology Information Technology Electronics and Instrumentation Engineering 

GCT - Gnanamani College of Technology's median placement salary stands as a testament to the quality of opportunities it provides to its students. The College recorded a median package for BTech as INR 3 LPA and INR 2.52 LPA as the median package of MTech, reflecting a competitive compensation package enjoyed by its placed students.