Production Engineering

Production and Industrial Engineering is a very good field of engineering and IIT-Delhi is among the top IITs.
Talking about the placements of PI Engineering at IIT-Delhi, it is almost 100%.
The average package of PI Engineering at IIT-Delhi is around 6 to 9 LPA.
Many multinational companies visit here and offer a good package to quality engineers.
Companies like Reliance Industries, PepsiCo, Glenmark, Wipro, Asian Paints, Sun pharma, Dr.Reddy's, Zydus Wellness, Cadila Pharma, Adani Group, HPCL, BPCL, Lodha Group, Paytm, Ashok Leyland, Tata, GM, CAT, TVS, Geometric, Shell, Fluent, Ashok Leyland, Hero Moto Corp, Bosch group, Honda and Mercedes recruit students.
Since PI Branch is an evergreen branch, the placement ratio of PI branch will also increase in future with a good amount of packages by the companies.
Talking about the IITs, all IITs placement ratio will also increase or the packages will increase because IITs are the topmost engineering institutes worldwide, so many companies will take part in campus placement at IITs for quality engineers.
So, the placement ratio of production and Industrial engineering branch of IIT-Delhi is almost 100% and will remain like with better packages.
Many large scale industries require a good amount of production and industrial engineering in their companies and they are offering very good amount to these engineers.

VIT University is among the most reputed colleges in South India and has a reputation for providing students with the best undergraduate programs for B.Tech degree.
The training and placement cell of VIT University is highly responsible and attracts a number of companies including the core and IT firms for the placement drives that happens round the year at the university.
For production and industrial engineering branch in VIT University, the average placement package recorded for the year 2017 was around Rs 4 to Rs 5 lakhs where around 50% of the students of the batch got placed in corporate IT companies or marketing firms like the mass recruiters TCS, Wipro, Infosys. Also the highest placement package observed for the year 2017 is around Rs 19 lakhs but the intake of students for such packages is really low being around one or two students per.
Hence I would recommend you to go for some other branch at the University if placements are only what you're looking for or if you are really passionate about the branch you can go for it anytime.
Cheers.

Production engineering is a combination of manufacturing technology, engineering sciences with management science. A production engineer typically has a wide knowledge of engineering practices and is aware of the management challenges related to production. The goal is to accomplish the production process in the smoothest, most-judicious and most-economic way.
Civil engineering is a professional engineering discipline that deals with the design, construction, and maintenance of the physical and naturally built environment, including works like roads, bridges, canals, dams, and buildings. Civil engineering is traditionally broken into a number of sub-disciplines.
Production has a bit better scope than civil as of now. The placements and jobs are better than civil and there are many areas of interest that one can pursue after production engineering.
On the other hand the condition of civil engineers is not so good.
The core jobs are very less in numbers. Civil Department has much lower placements as compared to other branches in almost all colleges, many students from civil opt for IT roles due to lack of Core jobs. So what is the use of studying civil engineering for 4 years?
Even the premier institutes like IITs and NITs are facing same problem with civil.
Production beats civil by one or two points max.
Choose whichever you are passionate about.

Hi there,
SVNIT is amongst the top 10 NITs of India and also one of the oldest technical institutes. It was established in 1961 with just 3-4 branches and mechanical was one amongst them.
So, being among the oldest institutes and one of the oldest core branches, the department is well settled and well equipped with the required necessary labs also a no. of new labs have been constructed which will mostly start in this academic year. It has faculty members with ocean of knowledge in various fields of Mechanical Engineering.
Some insights of the colleges:
Intake: 120 (mechanical)
Placements
Average package: 5.15 LPA (mechanical)
Highest package: 10.6 LPA (mechanical)
Lowest package: 2.25 LPA (mechanical )
Recruiters:
John Deere, Honda, Microsoft, Airtel, Bharat Petroleum, Endurance, HSBC Bank, Vedanta, Infosys, TCS, Pidilte, Tata, Maruti Suzuki and many more.
Here is the link to get more insights of the placement at SVNIT.
Here is the link:
https://www.google.co.in/url?sa=t&source=web&rct=j&url=http://www.svnit.ac.in/web/placement.php&ved=0ahUKEwjNldyAhKDWAhVHPY8KHY7RAosQFggmMAA&usg=AFQjCNHPXkxakZXuEjmMG0sZtyF5SpS6bQ
Hope this helps.

Production engineering is a unique branch which includes engineering and management both. It is required in many sectors as such. The main job opportunities are asfollowing -
1) Almost all automobile Companies: One of the best place to work for PE
2) Some PSU companies even hire specially for PE, like Vishakhapatnam Steel. But seats are very less.
3) Some PSU Companies hire as a mechanical engineer either through GATE or their own written exam like SAIL, GAIL, BHEL, NTPC etc.
The roles offered in production are generally as following -
1.) Quality
2.) Purchase & procurement
3.) Production / shop floor engineer
4.) Maintenance engineer
5.) Logistics & stores
6.) Design & product development etc
7.) ERP stream (SAP, Oracle, other ERP software's) etc.
There are more roles offered than this. This is just the general list.
Try to get into IITs, NITs or other CFTIs for B.tech and then appear for GATE for post-graduation or for jobs in PSUs. For studying abroad appear for GRE and TOEFL. Consider all available options before making a decision.