Central Institute of Plastics Engineering and Technology, Hyderabad After 10th Diploma Courses and Fees 2025
- Public/Government Institute
Last updated on 7 Jan '25Central Institute of Plastics Engineering and Technology, Hyderabad Overview
Table of content
- Central Institute of Plastics Engineering and Technology, Hyderabad After 10th Diploma Eligibility and Highlights 2025
- Central Institute of Plastics Engineering and Technology, Hyderabad After 10th Diploma Popular courses
- Central Institute of Plastics Engineering and Technology, Hyderabad After 10th Diploma Seats
- Students like you also explore these online After 10th Diploma courses
- Central Institute of Plastics Engineering and Technology, Hyderabad After 10th Diploma Comparison with similar colleges
- Central Institute of Plastics Engineering and Technology, Hyderabad After 10th Diploma Student Reviews
Central Institute of Plastics Engineering and Technology, Hyderabad After 10th Diploma Eligibility and Highlights 2025
Central Institute of Plastics Engineering and Technology, Hyderabad After 10th Diploma is After 10th level programme, offered in the Full Time mode. The duration of the programme is 3 years.
Central Institute of Plastics Engineering and Technology, Hyderabad After 10th Diploma Fees 2025
Fees for the courses offered at Central Institute of Plastics Engineering and Technology, Hyderabad comprise various components, such as tuition fees, hostel fees, one-time fees, etc. The total After 10th Diploma fee at Central Institute of Plastics Engineering and Technology, Hyderabad is INR 44,700. However, the Central Institute of Plastics Engineering and Technology, Hyderabad fee structure includes a few components that are paid only once, namely one-time fees. Candidates can check out the following table for Central Institute of Plastics Engineering and Technology, Hyderabad After 10th Diploma fee bifurcation:
| Fee Component | Amount |
| Tuition Fee | INR 44,700 |
NOTE: The mentioned fee is taken from the official website/sanctioning body. It is still subject to change and, hence, is indicative.
Find below the key highlights of the Central Institute of Plastics Engineering and Technology, Hyderabad After 10th Diploma course:
Central Institute of Plastics Engineering and Technology, Hyderabad After 10th DiplomaPopular courses
Filter
Streams
Mode of Study
Course Level
Location
+3 More
Showing 2 Courses
Recommended Colleges
Explore courses in popular similar colleges
Students who showed interest in Central Institute of Plastics Engineering and Technology, Hyderabad - PG Diploma also showed interest in
Want better recommendations?
There is a 90% more chance of getting best college recommendations by sharing preferences.View allCollections
Is this recommendation relevant?
Central Institute of Plastics Engineering and Technology, Hyderabad After 10th DiplomaSeats
180
Total Seats Available| Courses | Seats |
|---|---|
| Diploma in Plastic Mould Technology | 90 |
| Diploma in Plastic Technology | 90 |
Students like you also explore these online After 10th Diploma courses
₹30 K
6 months
₹17.3 K
6 months
₹8.05 K
1 year
₹4 K
1 year
₹1.3 L
1 year
₹1.25 L
3 years
₹5.22 K
3 years
₹18 K
1 year
View all courses
Central Institute of Plastics Engineering and Technology, HyderabadComparison with similar colleges
Compare After 10th Diploma at Central Institute of Plastics Engineering and Technology, Hyderabad with other similar colleges
| College | Median Salary | Total Tuition Fees | Ranking |
|---|---|---|---|
Central Institute of Plastics Engineering and Technology, Hyderabad | -/- | ₹ 44.7 K | -/- |
Balaji ICE Institute  Compare | -/- | -/- | -/- |
Mangalayatan University - WILP, Pune Compare | -/- | ₹ 96 K | -/- |
Modern College Compare | -/- | -/- | -/- |
eduVishva Academy Compare | -/- | -/- | -/- |
NIFCA Compare | -/- | -/- | -/- |
The values are of the latest years available with Shiksha. For more details, check detailed comparison
View comparisons
Central Institute of Plastics Engineering and Technology, Hyderabad After 10th DiplomaExplore Other Courses
Central Institute of Plastics Engineering and Technology, Hyderabad After 10th DiplomaStudents Ratings & Reviews
4.8/5
1 Verified Review
- 4-51
Placements5
Infrastructure5
Faculty & Course5
Campus Life5
Value for Money4G
G Saritha
Diploma in Plastic Mould Technology - Batch of 2021
4.8
5Placements5Infrastructure5Faculty5Crowd & Campus Life4Value for Money
Our college is good for average or below average students.
Placements: Minimum 90% to 95% placements were provided in our college. Some of the students of our batch were placed with maximum salary of Rs.10,000 to Rs.15,000 per month. Other state companies conducted interviews on campus for internships and placements. Top roles offered were designing or CNC machine operator.
Infrastructure: Labs and practical sessions were very good. Hostel facilities were average during our batch and are improved now. Hostel had strict security.
Faculty: Faculty members were well qualified. They had good knowledge, communication skills, and were experienced. The course curriculum was completely relevant to industry. Practicals which students practice will help a lot during internships. If students study 2 to 3 days before exams, they can pass.
Other: Duration of our course is 3 years. Our college gives good experience. College fee charges are Rs.3 lakhs, including hostel fee.
Reviewed on 8 Oct 2022Read More
B
Bandi Rakesh
Diploma in Plastic Mould Technology - Batch of 2021
4.2
4Placements4Infrastructure4Faculty5Crowd & Campus Life4Value for Money
Review of Central Institute of Plastics Engineering and Technology, Hyderabad.
Placements: Our college provided good placements. Job roles like technical assistant and junior engineer were offered. Studying for a PG diploma here helps you to gain better placements. Various specialisations are available in computers.
Infrastructure: The infrastructure of our college and hostel was good. Limited sports facilities were available in our college. A new hostel was recently opened on campus. The food served was average. Our college had good security with CCTV surveillance.
Faculty: Faculty members of our college were good. They would help you with practicals. We had different learning aspects in different fields. We could pursue B.Tech through the e-CET entrance exam in Telangana and B.Tech in Ahmedabad and Gujarat.
Other: We celebrate the freshers and the Ganesh festival every year in our college. Attendance and uniform were compulsory in our college.
Reviewed on 16 Jul 2022Read More
View All 2 Reviews
Central Institute of Plastics Engineering and Technology, Hyderabad
Student Forum
Anything you would want to ask experts?Answered a year ago
Central Institute of Plastics Engineering and Technology, Hyderabad has below criteria for taking admissions to it's various courses:
| Courses | Eligibility |
|---|---|
| After 10th Diploma | Candidate must have passed 10th examination from a recognised board. |
A
Atul Mishra
Beginner-Level 1
Answered a year ago
Central Institute of Plastics Engineering and Technology, Hyderabad has courses such as PG Diploma, After 1th Diploma to offer. These courses are in the stream of Engineering.
A
Atul Mishra
Beginner-Level 1
Answered a year ago
The overall seats available across all courses offered by Central Institute of Plastics Engineering and Technology, Hyderabad is up to 300. Good thing to know is that Central Institute of Plastics Engineering and Technology, Hyderabad has courses which are approved by prominent Government bodies lik
A
Atul Mishra
Beginner-Level 1
Answered a year ago
Central Institute of Plastics Engineering and Technology, Hyderabad has been rated 4.5 on Infrastructure parameter.
Central Institute of Plastics Engineering and Technology, Hyderabad has also been rated 5 for Campuslife.
A
Atul Mishra
Beginner-Level 1
Answered a year ago
Central Institute of Plastics Engineering and Technology, Hyderabad has been rated 4.5 on placements.
A
Atul Mishra
Beginner-Level 1
Content authored by:
Anya Singh
Updated on Jan 7, 2025
Central Institute of Plastics Engineering and Technology, Hyderabad News & Updates
Latest
Popular
Anum Ansari · Feb 10, 2025
2.7M views · 15 comments
Anum Ansari · Feb 10, 2025
5.2L views · 11 comments
Anum Ansari · Feb 10, 2025
9.6K views · 3 comments
Jasleen Taneja · Feb 10, 2025
1.1L views
Jasleen Taneja · Feb 10, 2025
2.4L views
Online coursesyou may be interested in
Central Institute of Plastics Engineering and Technology, HyderabadContact Information
Address
Central Institute of Plastics Engineering and Technology, Hyderabad, LDA Phase II, Cherlapally,
Hyderabad ( Telangana)
Go to College Website ->
Useful Links
Know more about Central Institute of Plastics Engineering and Technology, Hyderabad
- All About Central Institute of Plastics Engineering and Technology, Hyderabad
- Fees 2025
- Reviews on Placements, Faculty & Facilities
- Admission 2025 - Cutoffs, Eligibility & Dates
- Placement - Highest & Average Salary Package
- Infrastructure Details & Reviews
- Central Institute of Plastics Engineering and Technology, Hyderabad Faculty
- Compare Central Institute of Plastics Engineering and Technology, Hyderabad
- Central Institute of Plastics Engineering and Technology, Hyderabad Q&A
Explore Courses at similar colleges
- Central Institute of Tool Design
- Bhavnagar Polytechnic Institute
- Pravin Patil College of Diploma Engineering and Technology
- Regional Institute of Polytechnic Studies,Pratapgarh
- Government Polytechnic College, Bramhapuri
- Bajaj Chandrapur Polytechnic College
- LNCT University
- Central Institute of Plastics Engineering and Technology, Sonipat
- Magnus Global Tech Education
- Bomma Institute of Technology and Science
How can I get into Central Institute of Plastics Engineering and Technology, Hyderabad for UG/PG courses? Am I eligible for admission?