Institute of Printing Technology and Government Polytechnic College After 10th Courses 2025
- Public/Government Institute
Last updated on 18 Dec '24Institute of Printing Technology and Government Polytechnic College Overview
Table of content
- Institute of Printing Technology and Government Polytechnic College Courses and Fees 2025
- Institute of Printing Technology and Government Polytechnic College Fee Structure
- Institute of Printing Technology and Government Polytechnic College All programs
- Institute of Printing Technology and Government Polytechnic College All courses
- Institute of Printing Technology and Government Polytechnic College Student reviews
Institute of Printing Technology and Government Polytechnic College Courses and Fees 2025
Candidates looking for admission to Institute of Printing Technology and Government Polytechnic College can apply for courses, such as After 10th Diploma in a wide range of specialisations. The aspirants must ensure they complete the eligibility criteria and get a valid score in the last qualifying exam to apply for courses at Institute of Printing Technology and Government Polytechnic College. The tuition fees for each programme vary depending on the number of specialisations offered or the number of affiliated colleges providing seats for the programme.
Candidates can have a look at the table below to get an understanding of the Institute of Printing Technology and Government Polytechnic College tuition fees, eligibility criteria, and qualifying exams necessary for each course:
| Courses | Tuition Fees | Eligibility |
|---|---|---|
After 10th Diploma(3 courses) | 5.8 K |
Commonly asked questions On Fees and Eligibility
Q: Which courses does Institute of Printing Technology and Government Polytechnic College offer to students?
A:
Institute of Printing Technology and Government Polytechnic College has courses such as After 1th Diploma to offer. These courses are in the stream of Engineering. Institute of Printing Technology and Government Polytechnic College has specializations such as After 10th Diploma specializations in Computer Science Engineering, Electronics Engineering.
Upvote 
Q: How many seats are available at Institute of Printing Technology and Government Polytechnic College for all courses combined?
A:
The overall seats available across all courses offered by Institute of Printing Technology and Government Polytechnic College is up to 240. Good thing to know is that Institute of Printing Technology and Government Polytechnic College has courses which are approved by prominent Government bodies like AICTE.
Upvote Q: Which major specializations are available at Institute of Printing Technology and Government Polytechnic College?
A:
Institute of Printing Technology and Government Polytechnic College offers Diploma courses including . Additionally, it also has After 10th Diploma courses. These programs are offerred in Full Time mode. Institute of Printing Technology and Government Polytechnic College has specializations such as After 10th Diploma specializations in Computer Science Engineering, Electronics Engineering.
Upvote Q: Is Institute of Printing Technology and Government Polytechnic College a known college/Institute?
A:
Institute of Printing Technology and Government Polytechnic College is a well-known institution for After 1th Diploma courses. These programs are delivered by highly experienced faculty. As per Shiksha verified reviews, Institute of Printing Technology and Government Polytechnic College has a rating of 4.5 on the basis of reviews by students. Not just this, it has also been rated 4.4 on campuslife, 4.6 on placements, 4.6 on faculty and 4.6 on Infrastructure.
Upvote Institute of Printing Technology and Government Polytechnic College Fee Structure
Candidates must pay a one-time fee and a tuition fee to apply for admission at Institute of Printing Technology and Government Polytechnic College. An additional hostel fee is to be paid if candidates want to avail hostel facility at the university. Candidates can make their decision accordingly after taking into account all the costs incurred while studying at an institution. Check out this table to get an understanding of all the costs necessary for admission to Institute of Printing Technology and Government Polytechnic College:
Institute of Printing Technology and Government Polytechnic College All programs
Filter
Streams
Course
Mode of Study
Specialization
+5 More
Showing 1 Program
Institute of Printing Technology and Government Polytechnic College All courses
Showing 3 Courses
Trending
Explore popular private colleges
Students looking for After 10th Diploma courses have shown interest these colleges
Visakhapatnam
₹1.56 L
Also preferred by students
Want better recommendations?
There is a 90% more chance of getting best college recommendations by sharing preferences.Noida
₹1.8 L
Also preferred by students
View allCollections
Is this recommendation relevant?
Institute of Printing Technology and Government Polytechnic CollegeStudents Ratings & Reviews
4.9/5
2 Verified Reviews
- 4-52
Placements5
Infrastructure5
Faculty & Course5
Campus Life4.5
Value for Money5S
Sabarinadh PT
Diploma in Printing Technology - Batch of 2023
5
5Placements5Infrastructure5Faculty5Crowd & Campus Life5Value for Money
Our college provides good placements.
Placements: Almost 90% of students are placed. Many students got internships. Printing technology offered many jobs like machine maintaining, packaging, binding, designing, teaching, etc.
Infrastructure: All types of printing machines are available in this college like gravure, flexography, and single and multi-color offset. DPT laboratory is also available. Classrooms are good and students can sit comfortably.
Faculty: All teachers are very helpful and they all graduated. They are very friendly with students. Teachers are friendly and helpful in conducting all programs. There are many faculty members for laboratory practicals. They are very helpful for preparing seminars and projects.
Other: This college conducts many fests like freshers day, Christmas, Onam, arts, and sports. Our college ambiance is very good.
Reviewed on 19 Sep 2022Read More
S
Shanmughapriya M
Diploma in Printing Technology - Batch of 2022
4.8
5Placements5Infrastructure5Faculty4Crowd & Campus Life5Value for Money
This college should require updation in machines.
Placements: In our class, there are 65 students. It is a good course which provides a rare one. There are many companies like Schawk Chennai and Five-star companies. Mostly 90% of students get the opportunity in internships. The roles are printing operator and package designer.
Infrastructure: Many laboratories are available. Packaging, binding, plate preparation, and press room are also provided. It has a free Wi-Fi facility, and the library has referred notes. Our college ensures a higher level of printing education and also conducts sports, arts, and others.
Faculty: Students are having most eligible qualified teachers. They are helpful in our course, and they have a B.Tech and higher qualifications. This course is rare and less competitive. It makes each student the ability to do the printing and other things.
Other: In Kerela, our institution is the only college that provides this course. So everyone will get jobs in the printing zone.
Reviewed on 18 Apr 2022Read More
A
Anonymous
Diploma in Computer Engineering - Batch of 2024
3.2
1Placements3Infrastructure4Faculty4Crowd & Campus Life4Value for Money
Disappoint with Placements, Impressed with Faculty, Average Infrastructure.
Placements: The percentage of placement in the computer engineering department of 21-24 batch students is absolute 0. Not even a single student got placement in the computer department. The placement cell is not even providing the notification on time. If any recruiting mail is received to the placement cell, the students will get the information at the last date or after. Previous batch placements were below average but still better than 21-24 batch. (This information is only based on my experience of 21-24 batch, I'm not sure about the current status). .
Infrastructure: Computer Lab - Lab Facility Is Fine, There's 3 Computer Lab That Have Many Systems With Ubuntu OS, And Internet Speed Were Good
Emergency power backup is average. Inverter sometimes does not last long. *And now there's a dedicated building in progress for the computer department (it's still in progress, so I don't have any other information). ? Internet - For Internet connection, there's no Wi-Fi facility for students on campus, but have Ethernet ports in every class in the computer department. ? Library - The library is pretty good; it has a lot of informative books. Collection, Log, Maintenance, Ambience, everything is pretty good. Hostel - I was a day scholar, so I don't know much about hostel. Sports and Games - The support for sports and games was below average there's a pretty good ground that is the only positive thing in sports and games
Canteen - Low spacious it's hardly enough to sit 20 students at a time (This information is only based on my experience of 21-24 batch, I'm not sure about the current status). .
Faculty: Teachers - The teachers were qualified, knowledgeable, and helpful. Teaching quality varies according to teachers. Curriculum - The curriculum is much better than some other computer degree courses, the curriculum does make students industry ready but the only problem is this course doesn't have a value that a degree Certificate have, but I'm sure that this is better. Exam - Semester exams are pretty hard. The pass percentage is about 50 - 65 (I'm not sure still it won't exceed 70) (This information is only based on my experience of 21-24 batch, I'm not sure about the current status). .
Other: Extracurricular Activities - NSS, IEDC, NCC, SHE etc. These organisations are good active and well organized. Events, Fest, connectivity programs are mainly conducted by the NSS, IEDC AND NCC
The worst thing about this course is the board/university. Sometimes I think they don't even know that they're responsible for managing the course. Almost everything is late: conducting exams, result publishing, evaluation, etc. (For example, the B. Teach lateral entry for Diploma students in 2024 is in progress; almost every procedure was done and waiting for publishing the allotment, but still the Diploma final exam results were not published. ? , Diploma certificates are the major thing needed for B. Teach lateral entry, and they're doing this. Some students almost did the lateral entry procedures, and after the Diploma result they got failed. They're time and money wasted. If the university has done everything better, then this course is the best. (This information is only based on my experience with the 21-24 batch; I'm not sure about the current status. ). .
Reviewed on 18 Sep 2024Read More
A
Akshay p
Diploma in Printing Technology - Batch of 2023
4.2
4Placements5Infrastructure4Faculty3Crowd & Campus Life5Value for Money
I am satisfied because of its faculty members and placements.
Placements: Placements are good in our college. The minimum salary offered is Rs.10,000 per month. Around 40% of students got placed in our course. Every year, placements are offered with decent salary packages. We can also try government sectors, and we can also improve our interview skills in training sessions.
Infrastructure: Our college has a decent collection of books in the library. The hostel is neat and has good facilities. Sports teams are also good. Wi-Fi facility is available, and the laboratory is well-equipped to improve practical knowledge. The laboratory assistant is also good.
Faculty: Teachers are well-qualified in our course. Semester exams are easy. They provide several revision classes and mold us to perform well in semester exams. Teachers make us comfortable in all aspects.
Other: I chose this course because of its high demand. Our college has few washrooms compared to other colleges so improvement is needed for this.
Reviewed on 19 Sep 2022Read More
P
Pranav A
Diploma in Printing Technology - Batch of 2023
4.6
5Placements5Infrastructure5Faculty5Crowd & Campus Life3Value for Money
Our college has good infrastructure and better campus life.
Placements: Our college has good courses with impressive placements. The majority of students are placed in various companies throughout the country. Every student has a better salary and a good professional life. Most students are satisfied with their jobs. Government and private companies are recruiting students.
Infrastructure: The college has a good campus with excellent features. Our labs and classrooms are student-friendly. The college provides a Wi-Fi-enabled campus and a good library for a better education. The hostel provided by the college is student-friendly with a number of facilities like in their home.
Faculty: The course is completed with six semester exams. Each exam is taken over six months. Teachers are brilliant and helpful, so students are very comfortable in exams and achieve brilliant scores. Every year, students are passed out with an above-average score.
Other: The college offers a variety of events, and the campus is very comfortable for students to enjoy their college days.
Reviewed on 19 Sep 2022Read More
A
Anonymous
Diploma in Printing Technology - Batch of 2022
4
4Placements3Infrastructure4Faculty5Crowd & Campus Life4Value for Money
To be honest, I am pleased with the campus.
Placements: At present, the final year students are not being placed in any of the industries because of the after-effects of COVID 19. But it is certain that there is the possibility for the campus interviews to take students for internships. One of the Qatar companies, Al Jazeera Printing Press Co. L. C., had requested to submit the CV of the interested students for the internship. The interview for the selection will be done in May. When we look at the previous batch, the seniors among us had the chance to attend many of the interviews within our college and the well-performed candidates were chosen for the internship. The starting wage for the diploma holder is Rs 10,000 per month and it can be up to Rs 70,000 depending on the talent of the worker. Printing technology is a professionalised course thus those who have the talent will get the placement easily. This course emphasises not only academic learning but also practical knowledge. The top role offered is the quality manager in the printing industry, which can only be achieved by experience. Schawk in Chennai, Coimbatore, Ernakulam, and Trivandrum Pvt limited industries are mostly appearing for campus interviews.
Infrastructure: Our campus provides a peaceful and calm place to learn things easily. The campus gives you an experience of learning, not just the bookish but also the different ways of practical knowledge. Some of the machines and the things that are included in the practical classes are old. The new inventions are not included in the practical. There is a student-friendly library which gives you all the information about the subject if you take the initiation. There is a men's and women's hostel which is a really good place for staying and studying.
Faculty: Talking about teaching, the best teachers are provided by the government to take classes. Only a B.Tech holder can be placed as a teacher for students, and after a great evaluation, only the teachers are selected. In our syllabus, the curriculum is an important thing that you have to participate in, and it is also considered for future activities. The semesters are not that difficult; they are courses that an SSLC passed student can easily pass with a great score. A minimum of 95% of students pass the examinations. and is easily placed in industries.
Other: This printing technology is a diploma course where you have a great job opportunity both inside and outside India. You will be easily picked by the industry. You will graduate from college after becoming mature in all aspects.
Reviewed on 18 Apr 2022Read More
View All 6 Reviews
Institute of Printing Technology and Government Polytechnic College
Student Forum
Anything you would want to ask experts?Answered a year ago
Institute of Printing Technology and Government Polytechnic College has been rated 4.6 on placements.
A
Atul Mishra
Beginner-Level 1
Answered a year ago
Institute of Printing Technology and Government Polytechnic College has been rated 4.6 for faculty as per reviews by students. This shows that Institute has qualified and experienced faculty members.
A
Atul Mishra
Beginner-Level 1
Answered a year ago
Institute of Printing Technology and Government Polytechnic College has been rated 4.6 on Infrastructure parameter.
Institute of Printing Technology and Government Polytechnic College has also been rated 4.4 for Campuslife.
A
Atul Mishra
Beginner-Level 1
Content authored by:
Bhumika Khandelwal
Updated on Dec 18, 2024
Institute of Printing Technology and Government Polytechnic College News & Updates
Latest
Popular
Online coursesyou may be interested in
Institute of Printing Technology and Government Polytechnic CollegeContact Information
Address
Institute Of Printing Technology And Government Polytechnic College Shoranur -2 Palakkad District Kerala State
Palakkad ( Kerala)
Go to College Website ->
Useful Links
Know more about Institute of Printing Technology and Government Polytechnic College
- All About Institute of Printing Technology and Government Polytechnic College
- Fees 2025
- Reviews on Placements, Faculty & Facilities
- Admission 2025 - Cutoffs, Eligibility & Dates
- Placement - Highest & Average Salary Package
- Infrastructure Details & Reviews
- Institute of Printing Technology and Government Polytechnic College Faculty
- Compare Institute of Printing Technology and Government Polytechnic College
- Institute of Printing Technology and Government Polytechnic College Q&A
Does Institute of Printing Technology and Government Polytechnic College provide good placement facilities?