B.Tech. in Mechanical Engineering
- Private Institute
- Estd. 2011
B.Tech. in Mechanical Engineering at DPGITM Overview
B.Tech. in Mechanical Engineering
at DPGITM
DPGITM offers a 4 years B.Tech. in Mechanical Engineering course at the UG level. To get admitted to DPGITM B.Tech. in Mechanical Engineering course, applicants must meet the entry requirements - 45.0% in 12th. DPGITM The total tuition fee for this course is INR 358000 for the entire duration of the course. Apart from the tuition fee, students are also required to pay a hostel fee of INR 292000. The course offers admission to 30 students. To learn more about other courses offered under B.E. / B.Tech at DPGITM, please visit.
Duration | 4 years |
Course Level | UG Degree |
Mode of Course | Full Time |
Total Tuition Fees | ₹3.58 Lakh |
Official Website | Go to Website  |
Seat breakup | 30 |
Type of University | Private |
B.Tech. in Mechanical Engineering at DPGITM Fees
B.Tech. in Mechanical Engineering
at DPGITM
| Fee components | Amount (4 years) |
|---|---|
The fee might include components other than tuition fees | ₹ 3.58 Lakh |
Hostel fee mentioned above is for cheapest option available. For other options available, please refer to fee pdf.
The fees might include components other than hostel fees.
Meal Plan is included in me Hostel fee mentioned above is for cheapest option available. For other options available, please refer to fee pdf.
The fees might include components other than hostel fees.
Meal Plan is included in mentioned fee. | ₹ 2.92 Lakh |
₹ 6.50 Lakh |
These are based on information available on various sources. Latest values may differ.
B.Tech. in Mechanical Engineering at DPGITM Placements
B.Tech. in Mechanical Engineering
at DPGITM
Top Recruiters for DPGITM3i Infotech
Apollo Munich
CFE India
Concentric
Dell
Dish TV
Ericsson India
Genpact
Hero Cycle
InterGlobe Technologies
JBM IndustriesLtd
Lumax
Munjal Showa
NIIT Technologies
OM Logistics Limited
Oyo Rooms
Subros
Tech Live Connect
Teleperformance
toyota
Varroc
Wipro
B.Tech. in Mechanical Engineering at DPGITM Entry Requirements
B.Tech. in Mechanical Engineering
at DPGITM
General
Requirements for 12th grade
- 45%
- Candidate must have studied Physics, Chemistry and Maths with above mentioned marks in the above subject taken together from any recognised Board/council. 40% marks in case of candidates belonging to reserved category.
HSTES
- N/A
JEE Main
- N/A
Other eligibility criteria
Candidate who have passed D.Voc. Stream in the same or allied sector can also apply.
OR
Candidate who have passed minimum 3 years Diploma Examination with at least 45% marks can also apply.
40% marks in case of candidates belonging to reserved category
B.Tech. in Mechanical Engineering at DPGITM Admission Process
B.Tech. in Mechanical Engineering
at DPGITM
- CounsellingAdmissions is through counselling made through Haryana State Counselling Society (HSCS) on the basis of rank obtained in JEE mains.
B.Tech. in Mechanical Engineering at DPGITM Cutoffs
B.Tech. in Mechanical Engineering
at DPGITM
3Gender
Quota
Category
HSTES round-wise cutoff Rank: (General-All India)
| Round | 2017 |
|---|---|
| 1 | - |
| 2 | 212216 |
Explore Courses offered by DPGITM
Select the Degree you are Interested in
Select the Stream you are Interested in
Other courses offered by DPGITM
Get best suited colleges for you in real-time
Here’s how it works:
Share your preferences with our assistant
Tell us about your city, course, budget & more
Get recommendations in no time
Discover best colleges that meet all your needs
It won’t take more than a minute!
Read B.E. / B.Tech reviews from DPGITM
Read Reviews
P
Piyushi Biswas 
B.Tech. in Mechanical Engineering - Batch of 2024
Offered by DPG Institute of Technology and Management
5
5Placements5Infrastructure5Faculty5Crowd & Campus Life5Value for Money
Good infrastructure and facilities etc.
Placements: Above 60% of students are placed in mechanical engineering. The highest is 6 LPA in mechanical engineering, the lowest is 3 LPA in mechanical engineers, Average is 4lpa in mechanical engineers. The top companies are Jindal steel, Matrix, and Nanda Glasses. About 100% of students got internships in our college.
Infrastructure: All the facilities are available in our college like labs, Machines, instruments for doing experiments, a library, etc. Hostel facilities are really good, they also provide a washing machine, they give good and healthy food to students. Medical facilities are also available.
Faculty: All the teachers are well qualified. They help students very much they have all knowledge towards their subjects. Mechanical course is very relevant to us. Our college makes students for the industry. The semester exam is quite difficult but with the guidance of our teachers, it will not that much hard for us. The pass percentage is 60% and above
Reviewed on 2 Jun 2022Read More
Sagar
B.Tech. in Mechanical Engineering - Batch of 2024
Offered by DPG Institute of Technology and Management
5
5Placements5Infrastructure5Faculty5Crowd & Campus Life5Value for Money
Have good infrastructure and well-qualified teachers.
Placements: 90% of students were placed. The highest package is 6 Lacs and the lowest 3 Lacs and average 3-4 Lacs. Matrix, Malinium techno tool, Pride India, Nanda Glasses. Students got 100% internship in Nanda Glasses, Pride India, and more. Students were highly skilled in AutoCAD and more.
Infrastructure: Have good infrastructure like fully AC rooms, a fully Wi-Fi campus and separate labs for separate subjects, a separate playground for separate games, have 24/7 camera surveillance. The hostel facilities are also good and have good food service in mess.
Faculty: The teaching quality is also good. All teachers were helpful, well qualified, and knowledgeable. If we studied then there is no difficulty in semester exams in college. The passing percentage of college is 60. Of course, this course makes the students for industry.
Reviewed on 2 Jun 2022Read More
R
Rajesh Kumar
B.Tech. in Mechanical Engineering - Batch of 2023
Offered by DPG Institute of Technology and Management
4.8
5Placements4Infrastructure5Faculty5Crowd & Campus Life5Value for Money
The college has good placements and friendly crowd.
Placements: Almost 90-95% of B.Tech students got placed in this current batch. The highest package offered in the mechanical batch is 6 LPA, the average package is 4 LPA, and the lowest package is 3 LPA. Nanda Classes, XIL LMT, Jindal, Millinium Tools, etc., came here. Design engineer, project and manufacturing engineer, etc., roles are offered.
Infrastructure: The college infrastructure is very good and comfortable. There are multiple facilities like library, sports, canteen, ground, basketball court, badminton, cricket etc. Hostel facilities are good. The campy has a neat and clean environment. It has AC rooms, and the food quality is good.
Faculty: The teachers are very knowledgeable. They share their ideas with us. They are motivating us. We have very well-planned courses. Most students are made industry-ready. The difficulty level is moderate, and the pass percentage is above 60%. Overall, the curriculum is very well-planned. The faculty are friendly and helpful.
Other: I am pursuing mechanical as I have an interest in the mechanical field. Without mechanical engineering, no one can imagine the world. Mechanical engineer can make any components in the world.
Reviewed on 2 Jun 2022Read More
D
Dipesh Divakar
B.Tech. in Mechanical Engineering - Batch of 2023
Offered by DPG Institute of Technology and Management
4.8
5Placements4Infrastructure5Faculty5Crowd & Campus Life5Value for Money
The college has good placements and friendly crowd.
Placements: Almost 95% of students got placed in our department. Everything is very well planned by our TPO ma'am, be it training, projects or development courses regarding placements. Companies like Jindal Steel and Nanda Classes come for placements. The lowest package offered was 3 LPA, and the highest package was 6 LPA. Roles offered are project engineer, design engineer, project manager etc.
Infrastructure: There are separate laboratories for every subject with very good equipment for practicals. A big library is available. The campus is Wi-Fi enabled. A cricket ground and a badminton court are available. Hostel services are available both for boys and girls. The crowd is friendly.
Faculty: The teachers are helpful and knowledgeable. They are friendly and have a good way of teaching. The course curriculum is very well-planned regarding every aspect like training, projects etc. Exams are moderate, and the pass percentage is above 60%. Overall, the faculty are good.
Reviewed on 2 Jun 2022Read More
B
Bharat kumar
B.Tech. in Mechanical Engineering - Batch of 2023
Offered by DPG Institute of Technology and Management
4.8
5Placements4Infrastructure5Faculty5Crowd & Campus Life5Value for Money
The college has good infrastructure, well-trained teachers, and good placements.
Placements: Almost 90% of students from different branches got placed in good companies. Reputed colleges hire students. Jindal Steel, Lixil, EMEC Engineering, Nanda Classes, etc., are the top recruiters. The highest package offered was 6 LPA, and the lowest package was 3 LPA.
Infrastructure: The college has Wi-Fi and good labs. I have no idea about the hostel. Labs are really good with all equipment and trained lab assistants. I went to the canteen, and it was up to the mark. We have got a cricket field, badminton court, and lawn tennis. Interested students are using these facilities.
Faculty: The college has well-qualified teachers. The course curriculum is designed by MDU University, and it is really updated to make students ready for placements. Most of the students pass semester exams as the difficulty level is moderate. The passing percentage is almost above 60%.
Other: The college organises seminars and takes students for industrial visits.
Reviewed on 2 Jun 2022Read More
View All 22 Reviews
Similar courses in the same city
₹8.4 L
Overall Rating
3.9
3.9₹10.8 L
Overall Rating– / –
₹6.07 L
Overall Rating4.1
4.1₹9.2 L
Overall Rating3.6
3.6₹10 L
Overall Rating4.0
4.0B.Tech. in Computer Science and Engineering
Offered by School of Engineering and Technology, BML Munjal University₹13.2 L
Overall Rating3.9
3.9₹12.32 L
Overall Rating4.2
4.2₹3.8 L
Overall Rating3.8
3.8₹5 L
Overall Rating3.7
3.7
B.Tech. in Mechanical Engineering
at DPGITM
Student Forum
Anything you would want to ask experts?Answered 6 years ago
We have automobile engineering course at DPG Polytechnic college for 10th pass students. For B.Tech, we have the mechanical branch in DPG ITM Engineering College.
DPGITM
Beginner-Level 3
B.Tech. in Mechanical Engineering at DPGITM News & Updates
B.Tech. in Mechanical Engineering
at DPGITM
Latest
Popular
UPASANA PRADHAN · Dec 11, 2024
33.1K views · 1 comment
Satyendra Singh · Dec 11, 2024
3.5L views · 10 comments
Anum Ansari · Dec 11, 2024
1M views · 3 comments
B.Tech. in Mechanical Engineering at DPGITM Contact Information
B.Tech. in Mechanical Engineering
at DPGITM
Address
Near Hero Honda, Behind Marble Market, Sector - 34
Gurgaon ( Haryana)
Phone
Email
Go to College Website ->
Useful Links
Know more about DPGITM
Know more about Programs
- Engineering
- Mechanical Engineering
- B Tech (Bachelor of Technology)
- Instrumentation Technology
- Food Technology
- Aeronautical Engineering
- Artificial Intelligence and Machine Learning
- Metallurgical Engineering
- MTech in Computer Science Engineering
- VLSI Design
- Petroleum Engineering
- Aerospace Engineering
- BTech in Biotechnology Engineering
- Pharmaceutical engineering
- Silk Technology
Is automobile engineering course available in DPG Engineering College?