National Institute of Advanced Manufacturing Technology
National Institute of Advanced Manufacturing Technology Logo

Advance Diploma in Forge Technology 

  • Public/Government Institute
  • Estd. 1966

Advance Diploma in Forge Technology
 at 
NIAMT 
Overview

Duration

18 months

Course Level

UG Diploma

Mode of Course

Full Time

Total Tuition Fees

59,250

Official Website

Go to Website External Link Icon

Seat breakup

46

Type of University

Public/Government

Advance Diploma in Forge Technology
 at 
NIAMT 
Fees

Fee componentsAmount (18 months)
59,250
59,250
Info Icon

These are based on information available on various sources. Latest values may differ.

Advance Diploma in Forge Technology
 at 
NIAMT 
Placements

Lock IconTop Recruiters for NIAMT
BHEL
HINDALCO
Maruti Suzuki
View placement details

Advance Diploma in Forge Technology
 at 
NIAMT 
 
Frequently Asked Questions

Q:   Is it worth to consider National Institute of Foundry and Forge Technology as a good Institute?

A: 
National Institute of Foundry and Forge Technology is a well-known institution for M.E./M.Tech, UG Diploma, B.Tech courses. These programs are delivered by highly experienced faculty. As per Shiksha verified reviews, National Institute of Foundry and Forge Technology has a rating of 4.1 on the basis of reviews by students. Not just this, it has also been rated 3.6 on campuslife, 4.3 on placements, 4 on faculty and 4.2 on Infrastructure.

Q:   What is the expected JEE Main cutoff 2024?

A: 

NIT Manipur JEE Main cutoff 2024 has been released for admission to the BTech courses. During the Round 1 cutoff, the closing rank for CSE was 25886 for the General category students under the AII India Quota. Among OBC candidates, the closing rank for B.Tech. in Computer Science and Engineering stood at 8750. Candidates seeking admisison to NIT Manipur can refer to the table below to check out the Round 1 closing ranks for BTech in CSE course for various categories under the AI quota: 

Category

JEE Main 2024 Expected Cutoff

Common Rank List

90-91

Gen-EWS

75-76

OBC-NCL

73-74

SC

51-52

ST

37-38

PwD

0.0013527

Q:   What to do after JEE Main session 2 result?

A: 

Candidates preparing for IITs are only required to appear for the JEE Advanced entrance exam after qualifying JEE Main. Students who who secure above the 98th percentile in JEE Main 2024 Session 2 should start preparing for JEE Advanced 2025 immediately. Those who score between 95th and 98th percentile should focus on improving their JEE Main score by taking multiple mock tests and practicing previous year's question papers. By analysing their strengths and weaknesses, candidates can identify their areas of proficiency and topics where they need improvement. If they can achieve full marks in their practice sessions, they can start preparing for JEE Advanced. However, if they cannot score full marks, it is recommended that they appear for multiple mock test series for more practice. 

Q:   Which courses does National Institute of Advanced Manufacturing Technology offer to students?

A: 

National Institute of Advanced Manufacturing Technology has courses such as M.E./M.Tech, UG Diploma, B.Tech to offer. These courses are in the stream of Engineering. National Institute of Advanced Manufacturing Technology has specializations such as M.E./M.Tech specializations in Environmental Engineering, Metallurgical Engineering, B.Tech specializations in Mechanical Engineering, Metallurgical Engineering, Production Engineering, Computer Science Engineering.

Thumbs Up IconUpvote Thumbs Down Icon

Q:   Is National Institute of Foundry and Forge Technology good for B.E. / B.Tech?

A: 
{Source: B.E. / B.Tech students & alumni}

Is National Institute of Foundry and Forge Technology (NIFFT) good for B.E./B.Tech?

Based on the reviews from students and alumni, here are some key points to consider:

* Infrastructure: The campus is well-planned and well-utilized, with good facilities for laboratories, libraries, hostels, and recreational activities.
* Facilities: The college has a wide range of facilities, including Wi-Fi, labs, a library, and a medical center.
* Faculty: The faculty members are highly qualified, experienced, and helpful, with many being PhD holders from reputed institutions.
* Curriculum: The curriculum is well-designed and relevant to the industry, with a focus on practical training and hands-on experience.
* Placement: The college has a good placement record, with almost 100% placement rates for some streams, and a median salary package of INR7-8 LPA.
* Campus Life: The college has a vibrant campus life, with regular events and festivals, and a strong sense of community among students.
* Value for Money: The college is considered to offer good value for money, with a reasonable fees structure and a strong reputation in the industry.

Some notable points from individual reviews include:

* "NIFFT is one of the best colleges for metallurgy and materials engineering."
* "The faculty is extremely helpful and supportive, and the curriculum is well-designed."
* "The campus is beautiful and well-maintained, with good facilities for recreation and relaxation."
* "The college has a strong focus on practical training and hands-on experience, which helps students develop valuable skills."

Overall, NIFFT seems to be a good choice for students looking for a solid education in engineering, particularly in metallurgy and materials engineering. However, it's essential to weigh the pros and cons and consider factors such as personal interests, career goals, and budget when making a decision.
Thumbs Up IconUpvote Thumbs Down Icon

Advance Diploma in Forge Technology
 at 
NIAMT 
Entry Requirements

Other eligibility criteriaUp Arrow Icon

Advance Diploma in Forge Technology
 at 
NIAMT 
Admission Process

  • Register and Apply
  • Merit Screening

Explore Courses offered by NIAMT

Select the Degree you are Interested in
Select the Stream you are Interested in

Other courses offered by NIAMT

60
6.7 LPA
1.42 L
60
6.7 LPA
– / –
60
– / –
1.42 L
60
– / –
1.42 L
View Other 8 CoursesRight Arrow Icon

Get best suited colleges for you in real-time

Here’s how it works:
Share your preferences with our assistant

Tell us about your city, course, budget & more

Get recommendations in no time

Discover best colleges that meet all your needs

It won’t take more than a minute!
Read UG Diploma reviews from NIAMT
Read ReviewsRight Arrow Icon

Advance Diploma in Forge Technology
 at 
NIAMT 
Students Ratings & Reviews

4.6/5
Verified Icon2 Verified ReviewsInfo Icon
Placement Review IconPlacements4.5
Infrastructure Review IconInfrastructure5
Faculty Review IconFaculty & Course4.5
Crowd Review IconCampus Life4
Money Review IconValue for Money5
P
Prasenjit pandey Verified Icon
Advance Diploma in Forge Technology - Batch of 2022
Offered by National Institute of Advanced Manufacturing Technology
4.8
5Placements5Infrastructure4Faculty5Crowd & Campus Life5Value for Money
Advance Diploma in forging (nifft).
Placements: In our course there are 40 students and almost 100% get placed in reputed forging company like RKFL Jamshedpur, Bharat forge, Viraj profiles Ltd, kems forging, bansal forging, che forge etc. The highest package was INR 3.2 lakhs CTC per year, the lowest was INR 2.4 lakhs CTC per year and average package was INR 2.8 lakhs CTC per year. Almost 100% got internship in Rkfl, bharat forge, kems forging etc. All the students got placed in GET position.
Infrastructure: In this college for ADC Forge and Foundry hostel, Homi J bhabha Hostel for boys there is free Wi-Fi available. In hostel one room is for two students with two beds, two study tables, fans etc. In hostel mess the food quality is very good and tasty and food is available three times ,breakfast lunch and dinner. There are big classrooms with projector facilities, labs available for practical and library available for books which is related to course which are not available in the market. There is also medical facilities available from 9am to 6pm. There is a big ground available for sports activities like cricket, football, running, jogging, exercise etc.
Faculty: Yes in this college teachers are very helpful and highly qualified from reputed college like IITs. Their teaching quality is very practically understandable. These teachers are highly qualified and some have worked at the industries. Then there is knowledge about practicals that we can gain. Yes, there are some difficulty in semester exams but if you study hard then there are no problems. Passing percentage is 40%.
Other: Because I am interested in this field. In forging industry there is great scope. You get to learn many things in forging industry. Yes in this college there are annual festival organised by students and college committee like Jinks fest, tech fest, annual sports, etc. Yes in this course, scholarship facilities are available for all the ADC students and no reservation issues are there for this.
Reviewed on 26 Feb 2023Read More
Thumbs Up IconThumbs Down Icon
N
NARAYAN CH BOSE Verified Icon
Advance Diploma in Forge Technology - Batch of 2017
Offered by National Institute of Advanced Manufacturing Technology
4.4
4Placements5Infrastructure5Faculty3Crowd & Campus Life5Value for Money
It is the only institute that provides forge and foundry courses.
Placements: This college was very good and confirms 100% of placements. A lot of companies visit the campus to hire students and offer very good packages. Previous year, the average salary offered for ADC was around Rs 23,000 per month. The maximum salary offered was Rs 35,000 per month. The top recruiting companies were Jindal, RKFL, Viraj, Nysam, etc., visit for placements.
Infrastructure: This college provides different hostels for different courses like Homi J Bhabha hostel for ADC and Nirala Chatrawas for girls. Hostels were clean and beautiful. Four hostels for boys and one for girls. It had one library, and a mess where students can get food. Mess was very cleaned and it provides students good food. The mess fee was Rs 3,100 per month. It provides one medical block, and two big grounds for play.
Faculty: The course curriculum was very good. They use traditional teaching methods. They had a workshop where can students gain practical knowledge. The professors were very good and helpful. Students will never know when the exam will knock on their door, and many exams were held by this college so always prepared themselves. Students will be pass if they attend the classes on regular basis.
Other: Scholarships were available for ADC students as well as for B. Tech and M. Tech students. ADC courses offered Rs 2500 per month and for M. Tech Rs 12,500 per month. This college organise Jinks fest every year, and celebrate during fests. This was the only institute that provides forge and foundry courses in Aisa.
Reviewed on 23 Feb 2022Read More
Thumbs Up IconThumbs Down Icon
S
Sumit Kumar Gupta Verified Icon
Advance Diploma in Forge Technology - Batch of 2020
Offered by National Institute of Advanced Manufacturing Technology
5
5Placements5Infrastructure5Faculty5Crowd & Campus Life5Value for Money
This is the best college in all aspects.
Placements: Around 100% of students were placed. Many top private companies were Tata, Jindal, Hero, Rockman, Siderforge, etc. Th government companies for placements were BHEL, HEC, etc. After selection company, students were posted to GET.
Infrastructure: Our college provides Wi-Fi fully and air conditioned. The laboratories were good. There were many newly edition books in the library. Apart from that, there were four boys hostels, and one girl hostel. The food served in the hostel and mess was good. Medical first aid centers were also available 24X7.
Faculty: Teachers were very highly qualified and experienced. They were very helpful and friendly with students. In this ADC course, there were 3 semesters, two semesters were theoretical exam patterns, and the last semester was on industrial training and projects. Our college provides students good training in the best industries.
Other: I chose the ADC course, because I like mechanical stream work. It provides 100% of placements in this course. Our college provides the best 3-4 days memorable days of a fest like Jinks and Pranav. Public transport was all time available to reach college. Ranchi airport was very near to this college. In this course, the government provides Rs 2,500 stipend until the course was completed.
Reviewed on 31 Jan 2022Read More
Thumbs Up IconThumbs Down Icon
View All 3 ReviewsRight Arrow Icon

Compare Courses From Similar Colleges

Similar courses in the same city

1.5 L
Overall RatingStar Icon5.0
– / –
Overall Rating– / –

Advance Diploma in Forge Technology
 at 
NIAMT 
 
Students also asked

Q:   Question: How is the course curriculum for B.E. / B.Tech at National Institute of Foundry and Forge Technology?

A: 
{Source: B.E. / B.Tech students & alumni}

Course Curriculum

* The course curriculum at National Institute of Foundry and Forge Technology (NIIFT) is structured to be relevant to industry requirements.
* The curriculum is designed to make students industry-ready, with a focus on practical applications.
* The course covers topics such as manufacturing engineering, mechanical engineering, and production engineering.
* The syllabus is regularly updated to reflect changing industry trends and demands.
* The curriculum includes projects and internships to provide hands-on experience.
* Some students mentioned that the course could benefit from more emphasis on certain areas, such as manufacturing systems engineering.
* Others noted that the curriculum is challenging, requiring strong foundations in mathematics and science.
* Faculty members are knowledgeable and experienced, with many holding Ph.D.s from reputed institutions.
* Students praised the teaching quality, saying that faculty members are helpful and supportive.
* The course is designed to be flexible, allowing students to pursue research or work in industry.

Note: The above answer is based solely on the provided text and does not contain any additional information or external links.
Thumbs Up IconUpvote Thumbs Down Icon

Q:   Which major specializations are available at National Institute of Advanced Manufacturing Technology?

A: 

National Institute of Advanced Manufacturing Technology offers Degree and Diploma courses including 7 UG and 5 PG courses. These programs are offerred in Full Time mode. National Institute of Advanced Manufacturing Technology has specializations such as M.E./M.Tech specializations in Environmental Engineering, Metallurgical Engineering, B.Tech specializations in Mechanical Engineering, Metallurgical Engineering, Production Engineering, Computer Science Engineering.

Thumbs Up IconUpvote Thumbs Down Icon

Q:   How are the placements at National Institute of Advanced Manufacturing Technology?

A: 

National Institute of Advanced Manufacturing Technology is a well-known institute of Engineering courses in Ranchi. When it comes to the placements, the institute offers good placements annually for its BTech, M.Tech and UG Diploma courses. As per the latest report, the the highest international package offered to BTech (MME and ME) batch 2024 during the National Institute of Advanced Manufacturing Technology placements in 2024 stood at INR 15 LPA. Further, the domestic the highest and average package offered to BTech (MME and ME) batch 2024 stood at INR 13.95 LPA and INR 7.4 LPA, respectively. The key highlights of the National Institute of Advanced Manufacturing Technology placements for the Class of 2023 are tabulated below:

Particulars

Placement Statistics (2023)

the highest package

INR 14 LPA (BTech)

INR 4.8 LPA (MTech)

INR 4.8 LPA (UG Diploma)

Average package

INR 9.25 LPA (BTech)

INR 4.1 LPA (MTech)

INR 2.75 LPA (UG Diploma)

Thumbs Up IconUpvote Thumbs Down Icon

Q:   Does National Institute of Advanced Manufacturing Technology offers placements to its UG Advanced Diploma Courses?

A: 

Yes, National Institute of Advanced Manufacturing Technology offers placements to its UG Advanced Diploma Courses annually. The key highlights of National Institute of Advanced Manufacturing Technology placements for the Advanced Diploma Class of 2023 are tabulated below:

Particulars

Placement Statistics (2023)

the highest package

INR 4.8 LPA

Average package

INR 2.75 LPA

Thumbs Up IconUpvote Thumbs Down Icon

Q:   Does National Institute of Advanced Manufacturing Technology offer 100% placements?

A: 

National Institute of Advanced Manufacturing Technology has good record of placements for its BTech, M.Tech and UG Diploma courses. As per the latest report, the the highest package offered to BTech (MME and ME) batch 2024 during the National Institute of Advanced Manufacturing Technology placements in 2024 stood at INR 15 LPA. Further, the domestic the highest and average package offered to BTech (MME and ME) batch 2024 stood at INR 13.95 LPA and INR 7.4 LPA, respectively. The key highlights of the National Institute of Advanced Manufacturing Technology placements for the Class of 2023 are tabulated below:

Particulars

Placement Statistics (2023)

the highest package

INR 14 LPA (BTech)

INR 4.8 LPA (MTech)

INR 4.8 LPA (UG Diploma)

Average package

INR 9.25 LPA (BTech)

INR 4.1 LPA (MTech)

INR 2.75 LPA (UG Diploma)

Thumbs Up IconUpvote Thumbs Down Icon
qna

Advance Diploma in Forge Technology
 at 
NIAMT 

Student Forum

chatAnything you would want to ask experts?
Write here...

Answered 6 years ago

I think Advance Diploma in Forge Technology would be a good choice. If you wish to go for Advance Diploma in Forge Technology, please check the eligibility as below. Candidate must have passed diploma in automobile/ metallurgical/ mechanical/ production/ manufacturing engineering/ B.Sc. degree with

...more

K

Kukki Bala

Contributor-Level 9

Advance Diploma in Forge Technology
 at 
NIAMT 
Contact Information

Address

Near Kanchnatoli,
Hatia, Ranchi

Ranchi ( Jharkhand)

Phone
06512292076

(For general query)

06512290859

(For admission query)

Email
gsdnifft@gmail.com

(For general query)

nifftranchi@gmail.com

(For admission query)

Go to College Website ->