B.E. in Mechatronics Engineering
3.5 /5
1 Student Q&A- A NAAC accredited
- Private Institute
- Estd. 1998
B.E. in Mechatronics Engineering at Kamaraj College of Engineering and Technology Overview
B.E. in Mechatronics Engineering
at Kamaraj College of Engineering and Technology
At the UG level, Kamaraj College of Engineering and Technology provides a 4 years B.E. in Mechatronics Engineering course to the students. To get admission to this course, aspiring students must meet the minimum eligibility requirements - 45.0% in 12th. The total cost for this course is INR 200000. This course offers admission to 30 students. Check out other courses available under B.E. / B.Tech at Kamaraj College of Engineering and Technology.
Duration | 4 years |
Course Level | UG Degree |
Mode of Course | Full Time |
Total Tuition Fees | ₹2.00 Lakh |
Official Website | Go to Website  |
Seat breakup | 30 |
Type of University | Private |
B.E. in Mechatronics Engineering at Kamaraj College of Engineering and Technology Fees
B.E. in Mechatronics Engineering
at Kamaraj College of Engineering and Technology
| Fee components | Amount (4 years) |
|---|---|
The fees might include components other than tuition fees.
Mentioned fee is as per Tamil Nadu Engineering Admission (TNEA). | ₹ 2.00 Lakh |
₹ 2.00 Lakh |
These are based on information available on various sources. Latest values may differ.
B.E. in Mechatronics Engineering at Kamaraj College of Engineering and Technology Placements
B.E. in Mechatronics Engineering
at Kamaraj College of Engineering and Technology
| Particulars | Statistics (2023) |
|---|---|
| Median Salary | INR 3.50 Lakh |
Top Recruiters for Kamaraj College of Engineering and TechnologyCognizant
Infosys
B.E. in Mechatronics Engineering at Kamaraj College of Engineering and Technology Entry Requirements
B.E. in Mechatronics Engineering
at Kamaraj College of Engineering and Technology
General
SC
ST
Requirements for 12th grade
- 45%
- Read moreCandidate must have passed HSC (10+2) or its equivalent with above mentioned marks from any recognised Board/council. Candidate who have passed HSC i.e., 10+2 in any one of the Vocational Subject (Basic Mechanical Engineering/ Basic Electrical Engineering/ Basic Electronics Engineering/ Basic Civil Engineering/ Basic Automobile Engineering/ Textile Technology) with any one of the Engineering related subjects namely Mathematics, Physics or Chemistry with above mentioned minimum average percentage put together are also eligible to apply.
CBSE 12th
- N/A
TNEA
- N/A
Other eligibility criteria
Candidate must have passed VIII, IX, X, XI & XII Std. from schools situated in Tamil Nadu.
Tamil Nadu native candidate who have passed any of the VIII, IX, X, XI & XII Std. or their equivalent exam from schools situated outside Tamil Nadu can also apply. They should produce Original Nativity Certificate.
Children of Central Government Employees, irrespective of their nativity, provided their parents or guardians (only if both parents are not alive) have been serving in Tamil Nadu continuously for the past five years can be eligible to apply.
Sons & daughters of All India service Tamil Nadu cadre officers are eligible to apply. A Self declaration from the parent in this regard is to be produced.
Children of employees in the Public Sector or Government recognized institutions had been working in their organisations for the past five years are also eligible, irrespective of their domicile.
B.E. in Mechatronics Engineering at Kamaraj College of Engineering and Technology Admission Process
B.E. in Mechatronics Engineering
at Kamaraj College of Engineering and Technology
- CounsellingAdmission is through Tamil Nadu Engineering Admissions (TNEA) counseliing which is based on marks obtained in 10+2.
B.E. in Mechatronics Engineering at Kamaraj College of Engineering and Technology Cutoffs
B.E. in Mechatronics Engineering
at Kamaraj College of Engineering and Technology
3Gender
Quota
Category
TNEA round-wise cutoff Rank: (General-All India)
| Round | 2022 | 2023 | 2024 |
|---|---|---|---|
| 2 | 26310 | 84019 | 102666 |
| 3 | 70665 | 105164 | 112023 |
Explore Courses offered by Kamaraj College of Engineering and Technology
Select the Degree you are Interested in
Select the Stream you are Interested in
Other courses offered by Kamaraj College of Engineering and Technology
Get best suited colleges for you in real-time
Here’s how it works:
Share your preferences with our assistant
Tell us about your city, course, budget & more
Get recommendations in no time
Discover best colleges that meet all your needs
It won’t take more than a minute!
Read B.E. / B.Tech reviews from Kamaraj College of Engineering and Technology
Read Reviews
B.E. in Mechatronics Engineering at Kamaraj College of Engineering and Technology Students Ratings & Reviews
B.E. in Mechatronics Engineering
at Kamaraj College of Engineering and Technology
3.5/5
3 Verified Reviews- 3-43
Placements3
Infrastructure4
Faculty & Course3.3
Campus Life3.7
Value for Money3.3SP
Stanley Ponraj
B.E. in Mechatronics Engineering - Batch of 2019
Offered by Kamaraj College of Engineering and Technology
3.4
2Placements4Infrastructure4Faculty3Crowd & Campus Life4Value for Money
Dissatisfied with the new rules imposed by the college.
Placements: Placements are not much good for the students who don't belong to IT. Mostly, only IT companies visit the college, and the other companies are from BPO sector. If the students are from non-IT background, they are supposed to prepare and get placed in IT companies. Non-IT students can only get placed in off-campus placements.
Infrastructure: The infrastructure of the college is good. Nowadays, they are no chances to bunk any class. A dispensary is present where no change will take place if a student or a patient is admitted. Wi-Fi is good, but the majority of the sites are blocked. Only Google can be accessed. Usage of mobiles is prohibited.
Faculty: Students can achieve their goals only if they are interested and willing to learn on their own. Faculty members just act as a ladder, and they don't spoon feed the students. Faculty are like mirror and students should behave well and not make the staff become against them.
Reviewed on 5 Mar 2019Read More
KT
KISHOR T V
B.E. in Mechatronics Engineering - Batch of 2018
Offered by Kamaraj College of Engineering and Technology
3.4
3Placements4Infrastructure3Faculty4Crowd & Campus Life3Value for Money
Review of Kamaraj College of Engineering and Technology.
Placements: The college has decent placement records. Placements for mechatronics department were not up to the expectations. A total of 6 out of 46 students were placed, with a package of Rs. 33,000 per month and it is the highest salary offered in my department during the academic year. Around 400 students got placed. Few of us undergone internships at some reputed companies. The college has a placement cell. It puts efforts in providing placement training for the students to get placed in IT companies.
Infrastructure: The college has sufficient classrooms with wooden furniture, which I like the most. Wi-Fi facility is available in most of the areas even in hostels with decent browsing speed. There are well-established labs for each department, and if anything is not working properly, it takes some time to be cleared, which happened in my department. We have a good hostel, each room is allotted for 4 persons. We have both an indoor stadium and a playground for sports activities.
Faculty: Enough number of faculty members are available. Every professor has their own way of teaching, and they are knowledgeable. They give good lectures on topics. They use English and Tamil for explaining the concepts and make use of the board and projectors during their lectures. The course curriculum is designed by Anna University.
Reviewed on 11 Sep 2018Read More
PN
Periyadurai N.
B.E. in Mechatronics Engineering - Batch of 2018
Offered by Kamaraj College of Engineering and Technology
3.6
4Placements4Infrastructure3Faculty4Crowd & Campus Life3Value for Money
I'm satisfied with because i learned and g placements,some disappointment because of teaching method
Placements: In my batch, the placements reached above 500 students. But, not everyone globe with the placed company. There are some low level salary company and consultancy were interviewed. Most of the company's like IT. Bio technology and polymer branch having wide range of opportunities so this department had maximum placed students. After that CSE and IT. The college placement officer still mailing interview details for the passed students.
Infrastructure: Infrastructure is not so much but it is awesome place when you study in this college. Library has lots of engineering ang general books and reading places also good. About sports the college encouraging and helping to achieve students to national level especially in cricket. Indoor is available to play badminton, volleyball, etc. , Canteen food is good. The classroom environment is fully enjoyable. If the staff can handle the student, the classroom will be heaven. Overall the infrastructure is above good.
Faculty: First the college give the syllabus and books in a starting point. Teaching method is normal because many of them using only classroom. Some teachers are qualified some of them fresher. They having sound knowledge in core but many of them not able to deliver the knowledge. I give some recommends to the college that is, first teach the teacher who is fresher. The ratio is nearly 60 students per teacher per subject. I got industry exposure through college or department staff. They definitely help to get industry knowledge. They provide good course curriculum to the student's.
Other: They help to conduct many of the event every year. There are one place is campus connectivity it connects most of them with college to help student. Scholarship is available for the student who got high mark in HSC. And some scholarship available who comes through anna university counselling. Every year they conducting Annual day and Sports day celebration after that they celebrate Achievers day to motivate student who achieving something it may anything. Extracurricular activities is more there like speaking, writing, drawing competition will help the student to become more successful. Overall the events conducting rate is increasing every year.
Reviewed on 8 Sep 2018Read More
V
VISHNU PRASATH M S
B.E. in Mechatronics Engineering - Batch of 2022
Offered by Kamaraj College of Engineering and Technology
3.8
3Placements4Infrastructure4Faculty4Crowd & Campus Life4Value for Money
Good infrastructure and facilities. Good faculty.
Placements: 70% of students are placed in our course.
INR 1,00,000 to INR 75,000 are the salary offered.
Infosys and TCS are the top recruiters.
An internship is important, so we do the internship. This is our preference. Robotics engineer/technician. Automation engineers, Control system design/troubleshooting engineers, Electronics design engineers, Mechanical design engineers, Data scientist/big data analysts, Instrumentation engineers, and Software engineers are the top role offered.
Infrastructure: Each department has one drinking water purifier (cooled water/normal water). One wash passion and common bathroom and toilet. Wi-Fi is available in our classroom. More labs are other in our college. Each and every Classroom has one projector. The classroom is very clean and has more facilities. The library is two types of library (department library and one all departments common library). The hostel was very good. But the mess food is average. The canteen facilities are good. Medical facilities are also there in our college. Sports and game facilities are also very good.
Faculty: Teachers are very helpful and very qualified and knowledgeable teachers. The teaching quality is very nice. Yes, this course is curriculum-relevant. And our college makes the student industry-ready.
Other: Mechatronics is the future that's why I chose the course. All activities are there on our campus.
Reviewed on 4 Jul 2021Read More
SF
Sachin Fan
B.E. in Mechatronics Engineering - Batch of 2021
Offered by Kamaraj College of Engineering and Technology
3
3Placements3Infrastructure3Faculty3Crowd & Campus Life3Value for Money
KCET Mechatronics engineering.
Placements: Low cut off students is offered by the highest package of about 1 Lacs per annum and the average package is for counseling students of about INR 75,000 per annum.
The internship is only based on the student's wish and area of interest. There are many companies offering internships with a minimum of 1 month mainly in Bengaluru, Mumbai.
Infrastructure: The infrastructure was quite good has almost everything. The lab, classroom, the library was good.
The quality of food available in the mess and canteen was very poor, only cricket is given more importance. Medical facilities are also poor. The hostel room is somewhat okay with facilities.
Faculty: Only a few numbers of faculties are available for this course,teaching was poor except for one or two. The faculty who is in this are quitting their jobs and moving to another course.
The regulation has been made more strict for the enrichment of the students. The curriculum was to groom students to become industry ready.
Other: I have selected this course because there are lots of scope in the future. Since it is mechatronics engineering, you are eligible for many-core companies.
The most important subjects are also taught practically.
Events and extracurricular activities are the student's wish and there are many opportunities. The scholarship is only available for counseling students.
Reviewed on 5 Mar 2020Read More
View All 5 Reviews
Compare Courses From Similar Colleges
₹2 L
Overall Rating3.1
3.1Similar courses in the same city
B.Tech. in Computer Science and Engineering
Offered by Kalasalingam Academy of Research and Education₹7.4 L
Overall Rating3.9
3.9₹2 L
Overall Rating3.4
3.4₹2 L
Overall Rating4.0
4.0₹2 L
Overall Rating3.8
3.8₹2 L
Overall Rating– / –
₹2 L
Overall Rating3.9
3.9₹2 L
Overall Rating– / –
B.E. in Mechatronics Engineering
at Kamaraj College of Engineering and Technology
Student Forum
Anything you would want to ask experts?Answered 5 years ago
Get all the Eligibility related information on the following link provided below: https://www.shiksha.com/b-tech/course/b-e-in-mechatronics-engineering-kamaraj-college-of-engineering-and-technology-virudhunagar-240382
D
Daksh Nagpal
Guide-Level 12
Colleges in VirudhunagarKamaraj College of Engineering and TechnologyCoursesB.E. in Mechatronics EngineeringB.E. in Mechatronics Engineering at Kamaraj College of Engineering and Technology News & Updates
B.E. in Mechatronics Engineering
at Kamaraj College of Engineering and Technology
Latest
Popular
B.E. in Mechatronics Engineering at Kamaraj College of Engineering and Technology Contact Information
B.E. in Mechatronics Engineering
at Kamaraj College of Engineering and Technology
Address
S.P.G.Chidambara Nadar – C.Nagammal Campus,S.P.G.C.Nagar, K.Vellakulam Near Madurai District
Virudhunagar ( Tamil Nadu)
Phone
4549278171
(For general query)
4549278791
(For admission query)
Email
principal@kamarajengg.edu.in
(For general query)
mail@kamarajengg.edu.in
(For admission query)
Go to College Website ->
Useful Links
Know more about Kamaraj College of Engineering and Technology
- All About Kamaraj College of Engineering and Technology
- Courses 2025
- Fees 2025
- Reviews on Placements, Faculty & Facilities
- Admission 2025 - Cutoffs, Eligibility & Dates
- Placement - Highest & Average Salary Package
- Cut off & Merit List 2025
- Infrastructure Details & Reviews
- Kamaraj College of Engineering and Technology Faculty
- Compare Kamaraj College of Engineering and Technology
- Kamaraj College of Engineering and Technology Q&A
Know more about Programs
- Engineering
- Mechatronics Engineering
- B Tech (Bachelor of Technology)
- Instrumentation Technology
- Food Technology
- Aeronautical Engineering
- Artificial Intelligence and Machine Learning
- Metallurgical Engineering
- MTech in Computer Science Engineering
- VLSI Design
- Petroleum Engineering
- Aerospace Engineering
- BTech in Biotechnology Engineering
- Pharmaceutical engineering
- Silk Technology
what about eligibility for lateral entry