B.Tech. in Computer Science and Engineering (Lateral Entry)
- Public/Government Institute
- Estd. 1986
B.Tech. in Computer Science and Engineering (Lateral Entry) at BIET Jhansi Overview
Duration | 3 years |
Course Level | UG Degree |
Mode of Course | Full Time |
Total Tuition Fees | ₹2.06 Lakh |
Official Website | Go to Website |
Type of University | Public/Government,Autonomous |
B.Tech. in Computer Science and Engineering (Lateral Entry) at BIET Jhansi Fees
Fee components | Amount (3 years) |
---|---|
₹ 2.06 Lakh | |
₹ 2.06 Lakh |
These are based on information available on various sources. Latest values may differ.
B.Tech. in Computer Science and Engineering (Lateral Entry) at BIET Jhansi Placements
B.Tech. in Computer Science and Engineering (Lateral Entry) at BIET Jhansi Frequently Asked Questions
Q: Which is better, BIET Jhansi or KNIT Sultanpur for BTech in CSE?
Both BIET Jhansi and KNIT Sultanpur accepts JEE Main scores, followed by a counselling process for admission to the BTech programmes. Talking about the 2023 cutoff, BIET Jhansi last round clsoing rank for BTech in CSE was 69144 where as for KNIT Sultanpur, the last round closing ranks stood at 63776 for the General All India category candidates. The cutoff indicates that BTech in CSE at KNIT is more compettitve than BIET Jhansi. Talking about the fees, the total tuition fees for BTech in CSE is INR 2.4 Lacs at BIET, whereas for KNIT, the total tution fee is INR 3.4 lakh. Talking about the ranking, both the institutes are not part of thr NIRF 2023 ranikng. So, candidadtes seeking admisison to any of these two colleges can consider the factors mentioned here to decide which college is better for them to pursue a BTech in CSE degree.
Q: What is the cutoff of Bundelkhand Jhansi BTech course?
Bundelkhand Institute of Engineering & Technology accepts JEE Main scores, followed by a counselling process for admission to the BTech programmes. During the BIET Janshi cutoff 2023, the last round closing rank ranged between 69144 and 190773, among which CSE was the most competitive specialisation. The Round 1 and the Last Round closing ranks for BTech in CSE were 60998 and 69144, respectively for the General All India category candidates. Candidates can refer to the table given below to check out the Last Round closing ranks for more BTech specialisations offered at BIET Janshi.
Course | Last Round (Closing Rank) |
---|---|
B.Tech. in Chemical Engineering | 189662 |
B.Tech. in Civil Engineering | 190773 |
B.Tech. in Computer Science and Engineering | 69144 |
B.Tech. in Information Technology | 80975 |
B.Tech. in Mechanical Engineering | 157457 |
B.Tech. in Electronics and Communication Engineering | 94430 |
B.Tech.8 in Electrical Engineering | 119936 |
Q: What is the UPTAC cutoff for BIET Jhansi BTech course?
BIET Jhansi cutoff for BTech is also based on UPTAC Counselling. As per the BIET Jhanshi UPTAC cutoff 2023, the last round cutoff for BTech ranged between 69144 and 157457 for the General All India category candidates. For the General Home State Quota, the Round 1 and the Last Round closing ranks were 76520 and 67424 for BTech programme.
Candidates seeking admission can refer to the table given below to check out the last round closing ranks for BITS Jhanshi cutoff 2023:
Course | Last Round (Closing Rank) |
---|---|
B.Tech. in Chemical Engineering | 189662 |
B.Tech. in Civil Engineering | 190773 |
B.Tech. in Computer Science and Engineering | 69144 |
B.Tech. in Information Technology | 80975 |
B.Tech. in Mechanical Engineering | 157457 |
B.Tech. in Electronics and Communication Engineering | 94430 |
B.Tech. in Electrical Engineering | 119936 |
Q: What is the median package of B.E. / B.Tech course that is offered by Bundelkhand Institute of Engineering and Technology?
Q: Is it worth pursuing B.E. / B.Tech at BIET Jhansi?
Is it worth pursuing BE/BTech at BIET Jhansi?
Here's a summary of the key points:
Pros:
* Decent placements: Around 60-70% of students get placed, with the highest package being 64 LPA from Google.
* Good infrastructure: Although some areas may be old, there are newer constructions, including a modern library and incubation center.
* Cultural events: Various festivals and fests are organized throughout the year, providing ample opportunities to engage in extracurricular activities.
* Scholarships: Available for meritorious students, with values ranging from Rs. 50,000 to Rs. 80,000.
* Affordable fee structure: Compared to other private colleges, the fee structure is relatively low.
Cons:
* Mediocre placements for core branches: Core branches like EE, ME, and CE often struggle to find placements in core companies.
* Limited internship opportunities: Only around 40% of students secure internships.
* Old infrastructure: While some areas are newer, others remain old and require renovation.
* Average quality of food: Both mess and canteen food receive mixed reviews.
* Limited faculty involvement: Some faculty members seem uninterested in supporting students beyond their classes.
Conclusion:
While BIET Jhansi has its pros and cons, it seems that the institution offers a decent education and experience. However, students considering enrollment must weigh the potential drawbacks against the benefits. It's essential to research thoroughly and consider factors like desired career paths, branch selection, and personal preferences before making an informed decision.
B.Tech. in Computer Science and Engineering (Lateral Entry) at BIET Jhansi Entry Requirements
B.Tech. in Computer Science and Engineering (Lateral Entry) at BIET Jhansi Admission Process
- CounsellingAdmission is through counselling based on the rank obtained in Uttar Pradesh State Entrance Examination (UPSEE)
Explore Courses offered by BIET Jhansi
Other courses offered by BIET Jhansi
Get best suited colleges for you in real-time
Tell us about your city, course, budget & more
Discover best colleges that meet all your needs
Compare Courses From Similar Colleges
Similar courses in the same city
B.Tech. in Computer Science and Engineering (Lateral Entry) at BIET Jhansi Students also asked
Q: When is CUET PG 2024 Application process starting?
NTA has released the CUET PG 2024 exam dates. CUET PG 2024 examination is scheduled to be held between March 11 to March 28. As per the exam dates, aspirants who are preparing for CUET PG 2024 examination can expect the CUET PG 2024 application form in the first week of January, 2024.
Before filling up the online application form, candidates are advised to go through the CUET PG eligibility criteria carefully so that candidates doesn't loose their candidature at the time counselling process.
The CUET PG 2024 application form will available online on the CUET PG official website for a period of a month.
Q: How is the placement facility at Bundelkhand Institute of Engineering and Technology?
Q: How does the placement cell for B.E. / B.Tech at BIET Jhansi assist students in getting placed?
How does the Placement Cell for BE/BTech at BIET Jhansi assist students in getting placed?
* Provides information about companies visiting the campus: According to several reviews, the Training and Placement Cell keeps students informed about companies that will be visiting the campus for recruitment purposes.
* Supports students in applying for off-campus placements: While some students mentioned that the college doesn't have a high success rate with on-campus placements, others noted that the Placement Cell supports students who wish to explore off-campus job opportunities.
* Offers resources for preparing for interviews and exams: Reviewers commended the faculty's willingness to guide students in their preparation for exams and interviews, which can increase chances of getting placed.
* Helps students build networks: By interacting with recruiters and professionals from various industries, students can establish connections that may lead to future job opportunities.
* Conducts mock interviews and group discussions: Some reviewers reported that the Placement Cell arranges mock interviews and group discussions to help students improve their communication and teamwork skills.
* Assists students in creating resumes and portfolios: Several reviewers appreciated the Placement Cell's efforts in helping students develop professional resumes and portfolios, which is essential for attracting potential employers.
Overall, the Placement Cell at BIET Jhansi appears to offer a range of services aimed at supporting students' career aspirations and increasing their chances of getting placed in their preferred organizations.
Q: What is the median salary of B.E. / B.Tech course offered by Bundelkhand Institute of Engineering and Technology?
Q: What factors determine the CUET PG Cut off?
The cut-off marks for candidates majorly depend on the following factors:
- Difficulty level of the CUET PG 2024 Examination
- The number of seats available for a particular course
- Total Number of Test Takers
- NIRF Ranking of the university for which the candidate applied
- Category of the candidate
Hence, because of all these factors, CUET PG 2024 candidates can expect different sets of cutoffs for different participating universities.
Student Forum
Answered 5 years ago
Answered 6 years ago
M
Guide-Level 14
B.Tech. in Computer Science and Engineering (Lateral Entry) at BIET Jhansi News & Updates
B.Tech. in Computer Science and Engineering (Lateral Entry) at BIET Jhansi Contact Information
Bundelkhand Institute Of Engineering and Technology Kanpur Road NH-25
Jhansi ( Uttar Pradesh)
(For general query)
(For admission query)
(For general query)
(For admission query)
Useful Links
Know more about BIET Jhansi
Know more about Programs
- Engineering
- Computer Science Engineering
- B Tech (Bachelor of Technology)
- Instrumentation Technology
- Food Technology
- Aeronautical Engineering
- Artificial Intelligence and Machine Learning
- Metallurgical Engineering
- MTech in Computer Science Engineering
- VLSI Design
- Petroleum Engineering
- Aerospace Engineering
- BTech in Biotechnology Engineering
- Pharmaceutical engineering
- Silk Technology
I got 2400 rank in upsee entrance exam , IS there any chance to get admission in BIET lateral entry BTech course ,should I wait till 4th