Central Institute of Plastics Engineering and Technology, Lucknow B.E. / B.Tech Courses & Fees 2025
- Public/Government Institute
- Estd. 1986
Last updated on 12 Dec '24Stories
Central Institute of Plastics Engineering and Technology, Lucknow Overview
Table of content
- Central Institute of Plastics Engineering and Technology, Lucknow B.E. / B.Tech Eligibility & Highlights 2025
- Central Institute of Plastics Engineering and Technology, Lucknow B.E. / B.Tech Popular courses
- Central Institute of Plastics Engineering and Technology, Lucknow B.E. / B.Tech Admission dates 2025
- Central Institute of Plastics Engineering and Technology, Lucknow B.E. / B.Tech Admission cutoff 2025
- Central Institute of Plastics Engineering and Technology, Lucknow B.E. / B.Tech Curriculum
- Central Institute of Plastics Engineering and Technology, Lucknow B.E. / B.Tech Seats
- Central Institute of Plastics Engineering and Technology, Lucknow B.E. / B.Tech Student Reviews
Central Institute of Plastics Engineering and Technology, Lucknow B.E. / B.Tech Eligibility & Highlights 2025
B.E. / B.Tech course offered at Central Institute of Plastics Engineering and Technology, Lucknow is 3 - 4 years long. Aspirants must check out the course-specific eligibility criteria before applying for admission to this college for B.E. / B.Tech. Central Institute of Plastics Engineering and Technology, Lucknow B.E. / B.Tech admission is provided based on JEE Main and UPTAC scores. Mentioned below is the eligibility criteria, mode, and selection criteria:
| Eligibility: |
|
| Mode: | Full Time |
| Selection criteria: | JEE Main and UPTAC |
Central Institute of Plastics Engineering and Technology, Lucknow B.E. / B.Tech Fees 2025
The fee structure for Central Institute of Plastics Engineering and Technology, Lucknow courses includes various components, such as facility fees, tuition fees, student welfare funds, etc. As per the overall structure, the total tuition fee for B.E. / B.Tech ranges from INR 1,65,000 - 2,44,800. The mentioned fee is as per the official website/sanctioning body. However, it is subject to change. Hence, is indicative. Given below are the key highlights for the Central Institute of Plastics Engineering and Technology, Lucknow B.E. / B.Tech courses:
Commonly asked questions On Highlights
Q: Is B.E. / B.Tech at Central Institute of Plastics Engineering and Technology, Lucknow worth the investment?
A:
{Source: B.E. / B.Tech students & alumni}
Is B.E./B.Tech at Central Institute of Plastics Engineering and Technology (CIPET), Lucknow Worth the Investment?
Here's a summary of the key points discussed by various students and alumni:
Placement
* Placement rates vary between 40% to 75%
* the highest salary package offered: INR11.50 LPA
* Average salary package offered: INR4.50 LPA
* Top recruiters include Denso, Honda, Maruti Suzuki, Amul, and others
* Internship opportunities available, with about 85% of students securing internships
Infrastructure and Facilities
* Campus is fully Wi-Fi enabled
* Library, laboratories, and workshops are well-equipped
* Hostel accommodation is available, with decent facilities
* Canteen services are available during limited hours
Faculty and Teaching Quality
* Faculty members are generally considered good and knowledgeable
* Teaching quality is good, with emphasis on both theoretical and practical aspects
* Some faculty members are excellent, while others may require improvement
Course Curriculum
* Course curriculum is relevant and focused on practical skills
* Labs and workshops are available, with a mix of theoretical and practical learning
Events and Extracurricular Activities
* Various events and festivals are organized throughout the year, including freshers' parties, tech fests, and sports activities
Overall Review
* While some students appreciate the college's infrastructure and faculty, others criticize the placement process and lack of industry exposure.
* Despite its limitations, CIPET seems to offer a unique blend of academics and extracurricular activities, making it a viable option for those interested in pursuing a career in plastic engineering and technology.
In conclusion, whether or not CIPET is worth the investment depends on individual priorities and expectations. Prospective students should weigh the benefits against the drawbacks and consider factors such as placement records, faculty quality, and overall reputation before making a decision.
Is B.E./B.Tech at Central Institute of Plastics Engineering and Technology (CIPET), Lucknow Worth the Investment?
Here's a summary of the key points discussed by various students and alumni:
Placement
* Placement rates vary between 40% to 75%
* the highest salary package offered: INR11.50 LPA
* Average salary package offered: INR4.50 LPA
* Top recruiters include Denso, Honda, Maruti Suzuki, Amul, and others
* Internship opportunities available, with about 85% of students securing internships
Infrastructure and Facilities
* Campus is fully Wi-Fi enabled
* Library, laboratories, and workshops are well-equipped
* Hostel accommodation is available, with decent facilities
* Canteen services are available during limited hours
Faculty and Teaching Quality
* Faculty members are generally considered good and knowledgeable
* Teaching quality is good, with emphasis on both theoretical and practical aspects
* Some faculty members are excellent, while others may require improvement
Course Curriculum
* Course curriculum is relevant and focused on practical skills
* Labs and workshops are available, with a mix of theoretical and practical learning
Events and Extracurricular Activities
* Various events and festivals are organized throughout the year, including freshers' parties, tech fests, and sports activities
Overall Review
* While some students appreciate the college's infrastructure and faculty, others criticize the placement process and lack of industry exposure.
* Despite its limitations, CIPET seems to offer a unique blend of academics and extracurricular activities, making it a viable option for those interested in pursuing a career in plastic engineering and technology.
In conclusion, whether or not CIPET is worth the investment depends on individual priorities and expectations. Prospective students should weigh the benefits against the drawbacks and consider factors such as placement records, faculty quality, and overall reputation before making a decision.
Upvote 
Central Institute of Plastics Engineering and Technology, Lucknow B.E. / B.TechPopular courses
Filter
Streams
Mode of Study
Specialization
Course Level
+4 More
Showing 4 Courses
Recommended Colleges
Explore courses in popular similar colleges
Students who showed interest in Central Institute of Plastics Engineering and Technology, Lucknow - B.Tech also showed interest in
Kanpur
10 courses3.9
₹1.87 L - 2.45 L
Similar fee structure to Central Institute of Plastics Engineering and Technology, Lucknow
Azamgarh
6 courses3.5
₹1.86 L - 2.47 L
Similar fee structure to Central Institute of Plastics Engineering and Technology, Lucknow
Kanpur
6 courses3.9
₹1.65 L - 2.45 L
Similar fee structure to Central Institute of Plastics Engineering and Technology, Lucknow
Want better recommendations?
There is a 90% more chance of getting best college recommendations by sharing preferences.Uttar Pradesh - Other
8 courses3.2
₹1.82 L - 2.45 L
Similar fee structure to Central Institute of Plastics Engineering and Technology, Lucknow
Uttar Pradesh - Other
₹2.45 L
Similar fee structure to Central Institute of Plastics Engineering and Technology, Lucknow
Uttar Pradesh - Other
9 courses3.5
₹1.91 L - 2.52 L
Similar fee structure to Central Institute of Plastics Engineering and Technology, Lucknow
View allCollections
Is this recommendation relevant?
Central Institute of Plastics Engineering and Technology, Lucknow B.E. / B.TechAdmission dates 2025
| Dates | Upcoming Events |
|---|---|
22 Jan '25 - 24 Jan '25 | JEE Main 2025 Exam Date Session 1 - Paper 1 |
28 Jan '25 - 29 Jan '25 | JEE Main 2025 Exam Date Session 1 - Paper 1 |
30 Jan '25 | JEE Main 2025 Exam Date Session 1 - Paper 2 |
Jan '25-Feb '25 | JEE Main 2025 session 1 examTentative |
31 Jan '25 - 24 Feb '25 | JEE Main 2025 Session 2 Registration |
1 Apr '25 - 8 Apr '25 | JEE Main 2025 Exam Date Session 2 |
Apr '25 | JEE Main 2025 session 2 examTentative |
Jun '25-Jul '25 | UPTAC 2025 BTech Registration, Payment of Fee, Document UploadTentative |
Jun '25-Jul '25 | UPTAC 2025 BTech Document VerificationTentative |
Jun '25-Jul '25 | UPTAC 2025 BTech Respond to Queries Round 1Tentative |
| Dates | Past Events |
|---|---|
26 Nov '24 - 27 Nov '24 | JEE Main 2025 Application Correction Session 1 |
28 Oct '24 - 22 Nov '24 | JEE Main 2025 Registration Session 1 |
Central Institute of Plastics Engineering and Technology, Lucknow B.E. / B.TechAdmission cutoff 2025
B.E. / B.Tech Cut Off 2024 for JEE Main: Year-Wise rank
JEE Main Last Round Closing Rank (General-All India)
JEE Main Last Round Closing Rank (General-All India)
| Course | 2022 | 2023 | 2024 |
|---|---|---|---|
| B.Tech. in Manufacturing Technology | 575068 | 244903 | 1069603 |
| B.Tech. in Plastic Engineering | 844821 | 996030 | 725988 |
BTech Cut Off 2024 for UPTAC: Year-Wise rank
UPTAC Last Round Closing Rank (General-All India)
UPTAC Last Round Closing Rank (General-All India)
| Course | 2022 | 2023 | 2024 |
|---|---|---|---|
| B.Tech. in Manufacturing Technology | 716289 | 244903 | 1069603 |
| B.Tech. in Plastic Engineering | 844821 | 996030 | 725988 |
Central Institute of Plastics Engineering and Technology, Lucknow B.E. / B.TechCurriculum
Commonly asked questions On Curriculum
Q: Question: How is the course curriculum for B.E. / B.Tech at Central Institute of Plastics Engineering and Technology, Lucknow?
A:
{Source: B.E. / B.Tech students & alumni}
Course Curriculum at Central Institute of Plastics Engineering and Technology, Lucknow
The course curriculum at Central Institute of Plastics Engineering and Technology, Lucknow is structured to provide students with a strong foundation in plastic engineering and technology. Here are some key points that summarize the course structure:
* Focus on Practical Skills: The course emphasizes practical skills over theory, with a focus on laboratory experiments, machine operations, and workshop training. This approach helps students develop hands-on experience and prepares them for real-world applications.
* Industry-Focused Education: The curriculum is designed to equip students with industry-specific knowledge and skills, making them ready for employment in the plastic and polymer industries.
* Semester Exams: Semesters are challenging, with regular assessments to evaluate students' progress. However, with consistent effort, students can pass the semesters with a minimum pass percentage of 40%.
* High-Quality Faculty: The faculty members are highly qualified and knowledgeable in their respective fields, providing students with expert guidance and mentorship throughout their academic journey.
Overall, the course curriculum at Central Institute of Plastics Engineering and Technology, Lucknow aims to produce graduates who are well-equipped to tackle the demands of the plastic and polymer industries, with a focus on practical skills, industry-focused education, and rigorous assessments.
Course Curriculum at Central Institute of Plastics Engineering and Technology, Lucknow
The course curriculum at Central Institute of Plastics Engineering and Technology, Lucknow is structured to provide students with a strong foundation in plastic engineering and technology. Here are some key points that summarize the course structure:
* Focus on Practical Skills: The course emphasizes practical skills over theory, with a focus on laboratory experiments, machine operations, and workshop training. This approach helps students develop hands-on experience and prepares them for real-world applications.
* Industry-Focused Education: The curriculum is designed to equip students with industry-specific knowledge and skills, making them ready for employment in the plastic and polymer industries.
* Semester Exams: Semesters are challenging, with regular assessments to evaluate students' progress. However, with consistent effort, students can pass the semesters with a minimum pass percentage of 40%.
* High-Quality Faculty: The faculty members are highly qualified and knowledgeable in their respective fields, providing students with expert guidance and mentorship throughout their academic journey.
Overall, the course curriculum at Central Institute of Plastics Engineering and Technology, Lucknow aims to produce graduates who are well-equipped to tackle the demands of the plastic and polymer industries, with a focus on practical skills, industry-focused education, and rigorous assessments.
Upvote Central Institute of Plastics Engineering and Technology, Lucknow B.E. / B.TechSeats
120
Total Seats AvailableCentral Institute of Plastics Engineering and Technology, Lucknow B.E. / B.TechExplore Other Courses
A
Anonymous
B.Tech. in Manufacturing Technology - Batch of 2025
1.8
3Placements2Infrastructure2Faculty1Crowd & Campus Life1Value for Money
There is no placement. So don't take this college; go for better options.
Placements: The condition of placement here is very bad; if you have even one backlog, placement will not happen. KN Upadhyaya was in charge; he also left. So the college is totally the worst. The college does not provide any internships. But they ask for internship certificates.
Infrastructure: There is no Wi-Fi facility for students, and the water is very bad. The bathroom is very dirty. The room is not so clean. Rooms are very bad, and there's no cleaning in the hostel. Food quality is very bad. There is no hygiene. A mess full of bad odors. Mess workers are very unhygienic.
Faculty: Teaching quality is very low. Teachers are very rude and arrogant. Also, the semester exam is very hard. Even though the course is not so good, they do not run labs; they only run labs for the name's sake. They do not have any proper equipment and facilities, which is very rude. In short, they do not make students industry-ready.
Other: I chose this because my dad said, "Go and study in CIPET." Event quality is very low. The campus is not attractive.
Reviewed on 14 Mar 2024Read More
A
Aditya sinhj
B.Tech. in Plastic Engineering - Batch of 2021
3.6
4Placements3Infrastructure4Faculty3Crowd & Campus Life4Value for Money
Our college has good infrastructure and facilities.
Placements: About 70% of students were placed. The top recruiters are Tata, Reliance, Suzuki, etc. Students got internships in Karam, Suzuki, etc. The percentage of students getting internships at our college is 50%. The role of our course is to provide a use for plastic in a recyclable use.
Infrastructure: The Central Institute of Plastic and Petrochemical Engineering has all the facilities and infrastructure, such as a Wi-Fi lab, smart classes, and a library. The quality of facilities in our hostel is very much better than any other college. They provide good food.
Faculty: Teachers of the Central Institute of Plastic and Petrochemical Engineering are highly educated and knowledgeable. The course curriculum is relevant. The semester exam is harder. The passing percentage in one semester is 50%.
Reviewed on 13 Jun 2022Read More
Ankit Patel
B.Tech. in Plastic Engineering (Lateral Entry) - Batch of 2023
3.6
3Placements4Infrastructure3Faculty3Crowd & Campus Life5Value for Money
It is a good college for getting placements.
Placements: Every year, around 40% of students in the B.Tech PE branch are placed. The highest salary package offered by Reliance is 8 LPA, where five students were placed this year. Until now, around 25% to 30% of students have been placed, with an average salary package of Rs. 35,000 per month. The top recruiting companies are Amul, Reliance, Lohiya Kanpur, KPL Kanpur, Lumex, Bhuj, Panasonic, etc. Mostly, students get positions as engineers in research and development, production, quality, etc.
Infrastructure: The buildings are good, but the college area is very small for engineering students, although the view from the outside is good. Free Wi-Fi is available. Hostels are average, and the food provided is also average. The girls' hostel is good. The classrooms are average with projectors, and there is an elevator that we can use. There are two auditoriums. One is an open auditorium, and the second is an insider auditorium.
Faculty: Most teachers are Ph.D. holders and have good skills for teaching. They have a helpful nature with all types of problems, but not all; we can personally ask them any doubts. They also give average or good internal grades and provide some tips for getting good grades on the final exam. The passing percentage is about 80% to 90%.
Other: I have done my diploma in this branch, and I know the scope of this industry. That's why I chose to do my B.Tech. Plastic engineering has more scope than other branches.
Reviewed on 15 Apr 2022Read More
R
Raghav Parashar
B.Tech. in Plastic Engineering - Batch of 2020
4
4Placements4Infrastructure4Faculty4Crowd & Campus Life4Value for Money
Satisfied with good environment.
Placements: 75%+ campus and off campus placement but due to covid less of college placement that year. The highest package offered is 11.50 lpa, average 4.50+ lpa and the lowest is 2.40+ lpa.
Denso, Honda, Maruti Suzuki, Amul etc. are the top recruiters.
90% internship offered by the companies Kingfa, Rajoo, RDSO, Amul, SRF etc.
Production and marketing job roles were offered.
Infrastructure: College campus is fully Wi-Fi equipped.
Fully specialised library and very good labs and very big workshop
Now we talk about college infrastructure. It is newly built building.
Canteen is available from 9 to 5 p.m.
Medical for hostlers, sports and games is also available.
Faculty: Teacher and faculty are very well qualified.
The teaching ability is good.
Teachers are qualified with their preferred subject.
The semester is hard. If you prepared for the exam then you can easily pass in the semester.
The pass percentage is 70% from each batch.
Other: I chose this college according to my UPSEE rank easy course, affordable government link up college, only a single college of plastics in all Uttar Pradesh.
Teachers and students relation should improve in this college.
There are so many events like sports event, capoira, fresher party, annual party, conference, industrial visits etc.
Reviewed on 29 Jan 2022Read More
P
Pradhumn Rajput
B.Tech. in Plastic Engineering - Batch of 2019
3.2
3Placements3Infrastructure4Faculty3Crowd & Campus Life3Value for Money
It is a good college with 78% placements in 2019 and has above average infrastructure & facilities.
Placements: Almost 78% of students got placed in our course. The highest salary package offered was 6.5 LPA, and the lowest salary package offered was 2.3 LPA. The average salary package offered was 3 LPA. Top recruiting companies were Honda, Uno Minda, Lohia Corp., Timex, Relax, Finolex, Sterlite Tech, Motherson, etc. About 85% of students got internships from our course in companies like Lohia, Timex, Relax, Minda, Finolex, Supreme, etc. Top roles offered in our course are production manager, plant head, supervisor, maintenance engineer, polymer engineer, lab inspector, etc.
Infrastructure: The campus can heles are Wi-Fi equipped. We have well-equipped labs, and classrooms with more than 150 gatherings with projectors, a library, canteen, auditorium, amphitheater, etc. The quality of the hostel is above average, and the food served in the mess is decent. Medical facility is good, whereas sports and games are conducted from time to time.
Faculty: Teachers are highly qualified and knowledgeable. The teaching quality is good. This course curriculum is more focused on practical skills than theory, this includes theoretical subjects, labs for practical, machines, and workshops. It does make students industry-ready as the college provides industry knowledge to students for their technical and survival aspects. Exams are not that difficult if studied regularly. The pass percentage was 40%.
Other: This course has scope for polymer and plastic industries. The best things are the number of opportunities which one can get. Some things could be better as the curriculum should be slightly improved as it feels long for me, there should be more attention in practice than theory. There are many events that our college conducts to aware people of plastics, cultural fests, connectivity to campus is good, scholarships are also available, and many extracurricular activities are also there.
Reviewed on 10 Dec 2021Read More
G
Gaurav Tripathi
B.Tech. in Plastic Engineering - Batch of 2024
4.2
4Placements4Infrastructure5Faculty4Crowd & Campus Life4Value for Money
Our college is good in every aspect with good placements and nice teachers. Everything is good.
Placements: There are average placements here. The highest salary package offered in the year 2019 was 9 LPA. There are diploma courses also as there is a B.Tech course with two branches, i.e., plastic engineering and manufacturing technology. Both the branches are good. Many students are studying here, and they all are satisfied with their faculty members, subjects, etc.
Infrastructure: The boys' hostel is not in a way as it should be, or it is of average type. However, the girls' hostel is superb. Wi-Fi is available in the hostel and even in classrooms. There is always a real-life situation of every topic, and classrooms are also nice and have proper seats. There is also a library in which you can get all subjects' books.
Faculty: Faculty members are good here, and they help every student. Semester exams are very tough because of the online mode. The teaching quality of teachers is very good, and they always start teaching the topic with basics. They always ask if you have any doubts or not and check all doubts of every student at any point.
Other: I chose this course because it is not as crowded as other courses. Now, the demand for plastic in every field is growing day by day.
Reviewed on 23 Jul 2021Read More
Photos
View All 10 Reviews
Central Institute of Plastics Engineering and Technology, Lucknow
Student Forum
Anything you would want to ask experts?Answered a year ago
Central Institute of Plastics Engineering and Technology, Lucknow has been rated 3.8 on Infrastructure parameter.
Central Institute of Plastics Engineering and Technology, Lucknow has also been rated 3.3 for Campuslife.
A
Atul Mishra
Beginner-Level 1
Answered a year ago
Central Institute of Plastics Engineering and Technology, Lucknow offers Degree and Diploma courses including 4 UG and 1 PG courses. Additionally, it also has After 10th Diploma courses. These programs are offerred in Full Time mode. Central Institute of Plastics Engineering and Technology, Lucknow
A
Atul Mishra
Beginner-Level 1
Answered a year ago
Central Institute of Plastics Engineering and Technology, Lucknow has below criteria for taking admissions to it's various courses:
| Courses | Eligibility |
|---|---|
| B.E. / B.Tech | Candidate must have passed Diploma in relevant stream from a recognised Institute. |
| After 10th Diploma | Candidate must have passed 10th examination from a recognised board. |
A
Atul Mishra
Beginner-Level 1
Answered a year ago
The overall seats available across all courses offered by Central Institute of Plastics Engineering and Technology, Lucknow is up to 498. Good thing to know is that Central Institute of Plastics Engineering and Technology, Lucknow has courses which are approved by prominent Government bodies like AI
A
Atul Mishra
Beginner-Level 1
Answered a year ago
Central Institute of Plastics Engineering and Technology, Lucknow has been rated 3.4 on placements.
A
Atul Mishra
Beginner-Level 1
Content authored by:
Hemansh Bhardwaj
Updated on Dec 12, 2024
Central Institute of Plastics Engineering and Technology, Lucknow News & Updates
Latest
Popular
Satyendra Singh · Jan 3, 2025
1.7L views · 4 comments
Satyendra Singh · Jan 3, 2025
1.8M views · 19 comments
Satyendra Singh · Jan 3, 2025
6.2L views · 1 comment
Online coursesyou may be interested in
Central Institute of Plastics Engineering and Technology, LucknowContact Information
Useful Links
Know more about Central Institute of Plastics Engineering and Technology, Lucknow
- All About Central Institute of Plastics Engineering and Technology, Lucknow
- Fees 2025
- Reviews on Placements, Faculty & Facilities
- Admission 2025 - Cutoffs, Eligibility & Dates
- Placement - Highest & Average Salary Package
- Cut off & Merit List 2025
- Infrastructure Details & Reviews
- Central Institute of Plastics Engineering and Technology, Lucknow Faculty
- Compare Central Institute of Plastics Engineering and Technology, Lucknow
- Central Institute of Plastics Engineering and Technology, Lucknow Q&A
Explore Courses at similar colleges
- Crescent College
- Central Institute of Plastics Engineering and Technology, Ahmedabad
- CIPET Bhubaneswar
- MIT Chennai
- PVPIT Pune
- Central Institute of Plastics Engineering and Technology, Chennai
- Rajarshi Rananjay Sinh Institute of Management and Technology (RRSIMT)
- Central Institute of Plastics Engineering and Technology, Jaipur
- GNIOT
- IIIT Agartala
What facilities are there at Central Institute of Plastics Engineering and Technology, Lucknow in terms of infrastructure?