How are DY Patil College of Engineering CS placements?

DY Patil College of Engineering Computer Science (CS) branch placements 2022 data is not released. Earlier, the placement rate recorded during DY Patil College of Engineering CS placements 2021 was 95%. The branch-wise placement rate recorded during DY Patil College of Engineering placements 2021 is presented below: Sectors Placement Rate (2021) Computer 95% IT 88% Instrumentation 81% Mechanical 80% Production 78% etc.. 77% Civil 60%

How many students are placed during DY Patil College of Engineering placements?

A total of 966 students were placed during DY Patil College of Engineering placements 2022. Further, an improving trend was witnessed in the no. of students placed over the past three years during DY Patil College of Engineering placements, which is presented below: Particulars Placement Statistics (2020) Placement Statistics (2021) Placement Statistics (2022) Students Placed 769 931 966 Note: The above-presented data is sourced from DY Patil College of Engineering placement report that was updated till June 6, 2022. The trends witnessed during DY Patil College of Engineering placements over the past three years with respect to the no. of students placed are presented below:

Is BTech available at DY Patil COE?

Yes, DY Patil College of Engineering offers a four-year BE programme in the field of Engineering which is considered equivalent or similar to the BTech programme. Approved by AICTE, recognised by DTE (Govt. of Maharashtra), this course is available across nine specialisations which include Computer, Information Technology, Electronics and Telecommunication, Instrumentation & Control, Mechanical, Production Sandwich, Civil, Artificial Intelligence & Data Science and Robotics & Automation. With an overall intake of 900 under all these specialisations combined, admission to all these courses is subject to CAP counselling conducted by DTE Maharashtra based on valid scores in MHTCET/ JEE Main exams.

What is the expected JEE Main cutoff 2024?

NIT Manipur JEE Main cutoff 2024 has been released for admission to the BTech courses. During the Round 1 cutoff, the closing rank for CSE was 25886 for the General category students under the AII India Quota. Among OBC candidates, the closing rank for B.Tech. in Computer Science and Engineering stood at 8750. Candidates seeking admisison to NIT Manipur can refer to the table below to check out the Round 1 closing ranks for BTech in CSE course for various categories under the AI quota: Category JEE Main 2024 Expected Cutoff Common Rank List 90-91 Gen-EWS 75-76 OBC-NCL 73-74 SC 51-52 ST 37-38 PwD 0.0013527

Is M.Tech available at DYPCOE?

DY Patil College of Engineering offers a two-year ME programme in the field of Engineering which is considered equivalent or similar to the M.Tech programme. This course is available across six specialisations which include Computer Engineering - Computer Networks, E&TC - VLSI & Embedded SystemsMechanical, Design Engineering, Production, Civil - Environmental Engineering and Civil - Construction Management. With an overall intake of 94 under all these specialisations combined, admission to all these courses is subject to CAP counselling conducted by DTE Maharashtra based on valid scores in GATE exam. Read on to know more about the ME course offered at DY Patil College of Engineering.

Is DY Patil College of Engineering a good college for Engineering?

The best way to understand whether a college is good for a particular stream or course or not is to work with the current students of the college. To make things easy, Shiksha.com brings verified students’ reviews of DY Patil College of Engineering to throw light on the subject of whether this is a good college or not. As per the afore-mentioned source, some of the statements shared by the students around DY Patil College of Engineering are as follows: Companies such as Wipro, TCS and Infosys are visiting the campus for placements Average placement packages of INR 4-5 Lacs per annum are offered to the students Infrastructure is good and well maintained The campus has computerised labs with Wi-Fi facility and Dell PCs with i5 generation Approximately 80%-90% of the students get placed every year With respect to all the reviews mentioned above, it can be said that DY Patil College of Engineering is a decent enough college for Engineering studies. While it is not the best if we compare it with the IITs and NITs in India, it is a decent state college affiliated to SPPU.

How are DY Patil College of Engineering Electronics and Telecommunications department placements?

DY Patil College of Engineering etc. branch placements 2022 data is not released. Earlier, the placement rate recorded during DY Patil College of Engineering etc. placements 2021 was 77%. The branch-wise placement rate recorded during DY Patil College of Engineering placements 2021 is presented below: Sectors Placement Rate (2021) Computer 95% IT 88% Instrumentation 81% Mechanical 80% Production 78% etc.. 77% Civil 60%

How many companies visit the campus during DY Patil College of Engineering placements?

A total of 265 companies visited the campus during DY Patil College of Engineering placements 2023. In addition, the trends witnessed during DY Patil Akurdi placements over the past three years with respect to the number of companies visited are presented below: Particulars Placement Statistics (2021) Placement Statistics (2022) Placement Statistics (2023) Companies visited 292 283 265

Does D.Y. Patil College of Engineering offers scholarship?

Engineering students receive INR 50,000 scholarship annually under the University Entry Scheme of Schneider Electric India Foundation.

Is DYPCOE Akurdi Pune good for B.E. / B.Tech?

{Source: B.E. / B.Tech students & alumni} Is DYPCOE Akurdi Pune good for B.E./B.Tech? Based on the reviews and feedback from current students and alumni, here are the key points: * Placement Records: DYPCOE Akurdi Pune has a strong track record when it comes to placements, with approximately 75% of students placed through on-campus placements. The highest package offered was 52 LPA, and the average package was around 4.5 LPA. * Facilities: The college has excellent infrastructure, with Wi-Fi enabled classrooms, state-of-the-art labs, and modern amenities. The college hostel is also well-regarded, with comfortable and clean accommodation options. * Faculty: The faculty members are generally considered to be helpful and knowledgeable, with many having a PhD in their respective fields. * Course Curriculum: The course curriculum is designed to prepare students for the industry, with a focus on practical skills and applications. * Exams: Semester exams are moderately difficult, with a significant emphasis on theoretical concepts. * Student Life: Campus life is vibrant, with numerous cultural events and festivals organized throughout the year. * Support Services: The college has a dedicated placement cell that provides guidance and support to students during the recruitment process. Overall, DYPCOE Akurdi Pune seems to offer a positive educational experience for students pursuing a B.E./B.Tech degree. While there may be some drawbacks and challenges, the majority of students appear to be satisfied with the college and its offerings. Note: The answer is based on the specific information provided by students and alumni, and does not reflect any external data or opinions.

What is the eligibility criteria to get admission at DY Patil College of Engineering?

Admission to the institute can be acquired through either CAP or Management Quota. 80% of the admissions are made available through CAP, while the remaining 20% are made at the Institute level. Only candidates who have qualified the CET or JEE main exams are eligible to apply for CAP for first year admission. To be considered for admission, the candidate must have obtained at least 50% in PCM (for open category) and 45% in PCM (in case of other backward categories), with Physics and Maths being compulsory subjects. Chemistry can be substituted with any technical or vocational subject.

Who are the top recruiters during DY Patil College of Engineering placements?

The list of top recruiters during DY Patil College of Engineering placements 2022 is presented below: DY Patil College of Engineering Top Recruiters 2022 Cognizant IBM RBL Bank TCS Reliance Jio Hexaware Technologies LTI Wipro Capgemini Vodafone Idea

What is MHT CET 2024 schedule?

Tabulated below is the tentative MHT CET 2024 schedule: Dates Upcoming Events 20 Mar '24 - 22 Mar '24 MHT CET 2024 Application Form Correction 16 Apr '24 - 30 Apr '24 MHT CET 2024 Exam May '24 MHT CET 2024 Result Jun '24-Aug '24 MHT CET 2024 Counselling

What is the schedule for MHTCET M.Tech 2024?

Candidates seeking admission through MHTCET M.Tech must have a valid scores in order to be eligible for further rounds of counselling. Tabulated below is the MHTCET M.Tech 2024 schedule for admissions to the M.Tech courses for the Home State Quota: Dates Upcoming Events Jun '24-Jul '24 MHTCET M.Tech 2024 Document Verification Jul '24 MHTCET M.Tech 2024 Last Date for Online Application Form Jul '24 MHTCET M.Tech 2024 Release of Provisional Merit List 15 Jul '24 - 17 Jul '24 MHTCET M.Tech 2024 Objections on Provisional Merit List Jul '24 MHTCET M.Tech 2024 Release of Final Merit List Jul '24 MHTCET M.Tech 2024 Online Submission & Confirmation of Option Form of CAP Round-I through candidate's Login Jul '24 MHTCET M.Tech 2024 Provisional Seat Allotment (CAP Round 1) Aug '24 MHTCET M.Tech 2024 Online Seat Acceptance (CAP Round 2)

What is DY Patil Akurdi cutoff for Home State Quota?

DY Patil College of Engineering Akurdi cutoff for the BE courses for Home State Quota is based on MHT CET scores followed by the round-wise counselling. MHT CET cutoff 2023 was concluded after the release of Round 3 Seat Allotment. Tabulated below are the Round 1 and the Last Round closing ranks for DY Patil Akurdi cutoff 2023 for the General All India Quota candidates: Course R1 (Closing Score) Last Round (Closing Score) B.E. in Civil Engineering 55.72 55.45 B.E. in Robotics and Automation 86.11 87.7 B.E. in Computer Engineering 97.34 97.49 B.E. in Information Technology 96.07 97.13 B.E. in Electronics and Telecommunication Engineering 91.49 92.08 B.E. in Instrumentation and Control Engineering 59.69 75.9 B.E. in Mechanical Engineering 81.12 84.51 B.E. in Artificial Intelligence and Data Science 94.85 95.11

How are the placements at DY Patil College of Engineering?

DY Patil College of Engineering placement report 2024 is not released. However, the key highlights of DY Patil placements 2023 as compared with 2022 and 2021 are presented below: Particulars Placement Statistics (2021) Placement Statistics (2022) Placement Statistics (2023) Highest package INR 28.39 LPA INR 41.3 LPA INR 27 LPA Median package INR 4.2 LPA INR 4.8 LPA INR 4.5 LPA Placement rate 74% 71% 76% Companies visited 292 283 265

How can students join DY Patil College of Engineering?

DYPCOE Akurdi Pune admissions are entrance-based. The institute accepts MHT CET and JEE Main scores for admission to its BE and BTech programmes. Whereas, for admission to its M.Tech and ME programmes, the college accepts the GATE scores. Candidates willing to take admission at the institute must apply on its official website.

Is DY Patil College of Engineering the best for MTech?

In the absence of ME-specific placements data, some of the key highlights of DY Patil College of Engineering BEand ME (overall) placements 2022 as compared with 2021 are presented in the below-mentioned table: Particulars Placement Statistics (2021) Placement Statistics (2022) Placement rate 84% 86% Companies visited 370 273 the highest package INR 28.39 LPA INR 41.30 LPA Median package INR 4.20 LPA INR 4.80 LPA Note: The placement data of 2022 presented above is updated till Jan 10, 2023. Considering the placement statistics mentioned above and verified students’ reviews of this college for M.Tech which mention that, “ This is an awesome college and worth the money. The campus crowd is really awesome.”, it can be considered as a good option for a master’s degree in the field of Engineering.

Is there an entrance exam for DY Patil College of Engineering?

Yes, Admission to both BE and ME courses offered by DY Patil College of Engineering is based on the state/national-level entrance exams. The entrance exams accepted for both these courses are as follows: Course Selection Process JEE width="320"> MHT CET/ JEE Main ME GATE

What is the opening and closing rank for BE in Information Technology at D.Y. Patil College of Engineering, Akurdi?

The opening and closing rank depends on the category and quota of candidates. For general category under All India, opening rank was 51553 and closing rank was 76206. Cut off are different when it comes to other categories or female candidates and even domicile of home state. Admission to BE in Information Technology in D.Y. Patil College of Engineering, Akurdi is based on the scores obtained in the entrance exam JEE. Applicants are advised to confirm what category are they applying while checking for cut offs.

What has been DY Patil Akurdi cutoff trend for BE Computer Engineering?

DY Patil Akurdi cutoff trend for BE Computer Engineering has been a declining trend if last three years are to be taken into consideration. DY Patil Akurdi cutoff 2023 for B.E. in Computer Engineering stood closed at 35755, which is lower that of 2022, which closed at 40075, which again is lower than that of 2021 as it closed at 82260. DY Patil Akurdi admission to BE Computer Engineering is based on JEE Main scores. It is mandatory for candidates to have a valid JEE Main scores in order to be eligible for further admission rounds.

What has been the trend for cut off in BE in Mechanical Engineering at D.Y. Patil College of Engineering, Akurdi in last few years?

The cutoff trend for BE at DY Patil College of Engineering, Akurdi has been decreasing in the recent years. In 2021, the closing rank for BTech under the General category for all India quota was 398312. In 2022, it decreased to 370252. Likewise, the cut off ranks have changed from 398312 to 370252 for OBC, 398312 to 370252 for SC, 398312 to 370252 for ST, 398312 to 370252 for EWS, 398312 to 370252 for PWD. This trend is likely to continue in the coming years, as the demand for Engineering education in India continues to grow. Similar cut off trend can be seen for female candidates under all categories, however, the ranks are slightly different.

What is the cutoff for BTech in Civil Engineering at DY Patil College of Engineering, Akurdi for candidate categories other than general?

The last year 2022 cutoff ranks for BE in Civil Engineering at DY Patil College of Engineering, Akurdi other than General category are - 609422 for OBC, 609422 for SC, 609422 for ST, 609422 for EWS, 609422 for PWD. While the admissions are based on the scores/rank obtained in JEE exam, the last cut offs also change a lot depending on All India quota or Home State. It also varies if the applicant is a female.

What is the median package offered during DY Patil College of Engineering placements?

DYPCOE average package data is not released. However, the median package offered during DY Patil Akurdi placements 2023 stood at INR 4.5 LPA. Further, a fluctuating trend was witnessed in the median package offered over the past three years during DY Patil College of Engineering placements, which is presented below: The median salary trends witnessed during DYPCOE placements over the past three years are presented below: Particulars Placement Statistics (2021) Placement Statistics (2022) Placement Statistics (2023) Median package INR 4.2 LPA INR 4.8 LPA INR 4.5 LPA

Where are DY Patil College of Engineering alumni placed?

According to data gathered from unofficial sources, Engineering sector has placed the most no. of DY Patil College of Engineering students. The sector-wise DY Patil College of Engineering alumni placement statistics are presented below: Note: The above-mentioned alumni data is gathered from unofficial sources and hence may vary.

What is the highest placement package offered during DY Patil College of Engineering placements?

The highest package offered during DY Patil College of Engineering placements 2023 stood at INR 27 LPA. Further, a fluctuating trend was witnessed in the highest package offered over the past three years, which is presented below: Particulars Placement Statistics (2021) Placement Statistics (2022) Placement Statistics (2023) Highest package INR 28.39 LPA INR 41.3 LPA INR 27 LPA

How does the placement cell for B.E. / B.Tech at DYPCOE Akurdi Pune assist students in getting placed?

{Source: B.E. / B.Tech students & alumni} Placement Cell for B.E./B.Tech at DYPCOE Akurdi Pune * Good Placement Record: According to some students, the placement cell has a good track record, with a placement percentage of around 80-90%. * Multiple Companies Visited: Several students mentioned that multiple companies, including core and sales companies, visit the campus for placements. * High Salary Packages: Some students reported receiving high salary packages, with the highest package being INR35 LPA. * Training and Guidance: The placement cell provides training and guidance to students, covering topics such as aptitude tests, group discussions, and skill development. * Interactions with Industry Experts: Alumni interactions with industry experts can also lead to valuable insights and networking opportunities. * Placement Support: Faculty members are supportive and help students prepare for placements, ensuring they are industry-ready. * Internship Opportunities: The college provides internship opportunities, which can help students gain hands-on experience and build their portfolios. However, some students noted that the hostel fees are high, and the college should improve its placement cell and provide more computer language courses for mechanical students. Despite these limitations, the majority of students praised the college's infrastructure, faculty, and placement record.

What is the placement rate recorded during DY Patil College of Engineering placements?

The placement rate recorded during DY Patil College of Engineering placements 2023 was 76%. In addition, a fluctuating trend was witnessed in the placement rate recorded over the past three years, which is presented below: Particulars Placement Statistics (2021) Placement Statistics (2022) Placement Statistics (2023) Placement rate 74% 71% 76%

What to do after JEE Main session 2 result?

Candidates preparing for IITs are only required to appear for the JEE Advanced entrance exam after qualifying JEE Main. Students who who secure above the 98th percentile in JEE Main 2024 Session 2 should start preparing for JEE Advanced 2025 immediately. Those who score between 95th and 98th percentile should focus on improving their JEE Main score by taking multiple mock tests and practicing previous year's question papers. By analysing their strengths and weaknesses, candidates can identify their areas of proficiency and topics where they need improvement. If they can achieve full marks in their practice sessions, they can start preparing for JEE Advanced. However, if they cannot score full marks, it is recommended that they appear for multiple mock test series for more practice.

Does DYPCOE give direct admission for BTech?

Yes, 20% of the seats are set aside for admissions by the college administration, according to the official website of the DY Patil College of Engineering, Akurdi. For additional information on this, prospective students are recommended to get in touch with the admission cell in charge at the college. The remaining 80% of seats are, however, filled via CAP counselling conducted by DTE Maharashtra on the basis of valid scores in MHTCET/ JEE Main and GATE exams.

How can I get admission in Dy Patil college of engineering?

To apply for admission to DY Patil College of Engineering, candidates must visit the official website of the respective entrance exam and complete the application form. The application process for national-level exams is conducted online. Below are the steps involved in the application process for DY Patil College of Engineering: Step 1: Go to the official website of JEE Main. Step 2: Click on the JEE Main 2024 Registration link. Step 3: Choose your preferred mode of registration and fill in all the necessary details. Then, click on the “Submit” button to complete the registration process. Step 4: After registration, fill out the detailed application form. Provide your educational qualifications, parents' details, communication and permanent addresses, and exam center preference. Step 5: Upload scanned images of your passport-size photograph and signature. Step 6: Pay the JEE Main registration fees. Step 7: After successfully paying the application fees, your application form will be submitted automatically.

How can I get admission to DY Patil COE, Pune for BTech?

BTech admission at DY Patil College of Engineering is subject to CAP counselling conducted by DTE Maharashtra on the basis of valid scores in MHTCET/ JEE Main and GATE exams. The minimum eligibility criteria for BTech is to pass Class 12/ Diploma in Engineering and Technology with 50% aggregate (45% in case of Backward class & PwD candidates from Maharashtra) with Physics & Mathematics as compulsory subjects along with Chemistry or Biotechnology or Biology or Technical Vocational subjects. Those who are eligible and have a valid score in MHT CET/ JEE Main Paper- I can apply for CAP counselling on the official website of DTE Maharashtra for final seat allotment.

Is there an entrance exam for M.Tech at DY Patil College of Engineering?

Yes, Admission to both BE and ME courses offered by DY Patil College of Engineering is based on the state/national-level entrance exams. The entrance exams accepted for both these courses are as follows: Course Selection Process BE MHT CET/ JEE Main ME GATE

What is the percentile required for DY Patil College of Engineering Akurdi for MTech ?

DY Patil College of Engineering Akurdi cutoff for ME/ Mtech courses is based on MHTCET M.Tech percentiles. DY Patil Akurdi offers two specialisations of ME and one specialisation of MTech, including M.Tech. in Construction and Management, M.E. in Environmental Engineering and M.Tech. in Robotics and Automation. Tabulated below is the closing precentile required for DY Patil Akurdi ME/ M.Tech cutoff: MHTCET M.Tech Last Round percentile (General-Home State) Course 2023 M.Tech. in Construction and Management 8.67 M.E. in Environmental Engineering 4.21 M.Tech. in Robotics and Automation 0.33

Can I do M.Tech at DY Patil College of Engineering?

Yes, DY Patil College of Engineering offers a two-year full-time M.Tech programme to the students. Available across six specialisations, the total intake for M.Tech courses is 94. Check out the below table for details on all the specialisations available here along with their specific seat intake. ME Specialisations Seat Intake Computer Engineering - Computer Networks 25 E&TC - VLSI & Embedded Systems 18 Mechanical - Design Engineering 18 Production 15 Civil - Environmental Engineering + Civil: Construction Management 18

D.Y. Patil College of Engineering, Akurdi

2 Videos,

7 Photos

DYPCOE Akurdi Pune: Cut off, Admissions 2024, Courses, Fees, Placements, Rankings

Akurdi, Pune

4.0 /5

(350 Reviews)

205 Student Q&A

A NAAC accredited
Private Institute
Estd. 1984

Last updated on 7 Aug '24

JEE Mains 2025 Question Paper PDF OUT

DYPCOE Akurdi Pune
What’s new?

JEE Main 2024 Session 2 Results are out. Candidates can log in to check and download their results from jeemain.nta.ac.in.

A few more updates are given below:

The GATE 2025 admit cards have been released for admission to the MTech course. Registered candidates can log in and download their admit cards from the official website. The GATE 2025 exam is to be conducted on Feb 1, Feb 2, Feb 15, and Feb 16, 2025.
The MHT CET 2025 registrations are open for admission to BE/BTech and Integrated BTech courses, and the last date without a late fee is Feb 15, 2025. The MHT CET 2025 exam will be scheduled from Apr 19 to Apr 27, 2025 (except Apr 24, 2025).

Stories

Courses & Fees

Admission Process

DYPCOE Akurdi Pune Overview

Table of content

DYPCOE Akurdi Pune Highlights 2024
DYPCOE Akurdi Pune Popular Programmes 2024
DYPCOE Akurdi Pune Admission Process and Important Dates 2024
DYPCOE Akurdi Pune Application Process 2024
DYPCOE Akurdi Pune Cutoff 2024
DYPCOE Akurdi Pune Placements 2024
DYPCOE Akurdi Pune Rankings 2024
DYPCOE Akurdi Pune Student Reviews
DYPCOE Akurdi Pune Courses & Fees 2024
DYPCOE Akurdi Pune College comparison
DYPCOE Akurdi Pune Scholarships 2025
Top online courses offered by DYPCOE Akurdi Pune
DYPCOE Akurdi Pune: How to reach?
DYPCOE Akurdi Pune Departments
DYPCOE Akurdi Pune FAQs

DYPCOE Akurdi Pune Highlights 2024

Established in 1984, DY Patil College of Engineering, also known as DYPCOE, is located in Akurdi, Pune. The NAAC has accredited it with Grade 'A'. DYPCOE Akurdi Pune is a private college and is affiliated with Savitribai Phule Pune University. It is also approved by the All India Council for Technical Education (AICTE). India Today has ranked it 74 under the ‘Engineering’ category in 2023. Outlook 2023 has also ranked it 13 under the ‘Engineering (Private)’ category. DYPCOE Akurdi is also recognised by the Directorate of Technical Education, Government of Maharashtra. It has also received the status of an ‘Autonomous Institute'.

DY Patil College of Engineering courses are offered at UG, PG, and PhD levels in the streams of Engineering and Technology. At the UG level, the college offers BE and BTech programmes. The BE programme is offered in over 8 major branches such as Computer Engineering, Artificial Intelligence & Data Science, Mechanical Engineering, and others. The ME and MTech programmes are offered at the PG level. DYPCOE Akurdi Pune admissions to the BE/ BTech and ME/ MTech programmes are based on the scores of state and national-level entrance exams such as JEE Main, MHT CET, and GATE.

DYPCOE Pune has collaborated with various organisations to facilitate student placements and to collaborate on various learning initiatives. The college has collaborated with NPM Infotech Pune, Verzo Bengaluru, Dronitech Mumbai, Institute of Satellite Telecom Pvt. Ltd. Pune, VR Automation, and many other companies. During DYPCOE Akurdi Pune placements 2023, the highest package stood at INR 27 LPA. Many top recruiters such as Cognizant, IBM, Reliance Jio, Wipro, and Capgemini, among others, visit the college campus for placements. The major highlights of DYPCOE Pune are tabulated below:

Particulars	DYPCOE Highlights 2024
Establishment year	1984
Ownership type	Private Institute
Location	Akurdi, Pune
Affiliated to	Savitribai Phule Pune University
Rankings	-Ranked 74 by India Today 2023 for Engineering -Ranked 13 by Outlook 2023 for Engineering (Private)
Top recruiters	TCS, Infosys Technologies, Capgemini
Highest package (2023)	INR 27 LPA
Collaborations	- NPM Infotech - VR Automation - Dronitech, etc.
Official website	dypcoeakurdi.ac.in

Check out more on D.Y. Patil College of Engineering, Akurdi Highlights in the below videos:

Commonly asked questions
On Highlights

Q: Can I get direct admission to DYPCOE?

Yes, as per the official website of DY Patil College of Engineering, Akurdi, 20% of the seats are reserved for the college management for admissions. Students seeking admission to these seats are advised to contact the admission cell in charge at the college premises for more details on this. Further, it is suggested that if a student is not sure about the marks and admission via different rounds, it is better to take admission after the fourth round only or before the second round.

Upvote

Q: How many entrance exam cutoffs will be released for admission to BTech at D.Y. Patil College of Engineering, Akurdi?

D.Y. Patil College of Engineering, Akurdi will release 6-8 rounds of JEE Main cutoffs for admission to B.Tech. The cutoffs will be released on a rolling basis, and the seats will be filled on a first-come, first-served basis. The cutoffs will be based on the following factors:

The JEE Main score of the candidate
The category of the candidate
The number of seats available in the course

Candidates must visit the official website of entrance exam to read clear instructions on how to proceed with the counselling process, once the round is released.

Upvote

Q: What is the JEE Mains cut off for BE in Computer Engineering in DY Patil College of Engineering, Akurdi?

For the 2022 academic year, the JEE main cut off for General category candidates in All India quota for BE in Computer Engineering at D.Y. Patil College of Engineering, Akurdi stood at 61542. B.Tech cut off varies depending on the category and domicile/quota of the applicant. For more details on the same, students are advised to check other course and category cutoff of D.Y. Patil College of Engineering, Akurdi here.

Upvote

Q: What is DY Patil Akurdi JEE Main cutoff 2023?

DY Patil cutoff 2023 for BE courses is based on JEE Main scores. DY Patil Akurdi admissions 2023 to BE courses have been cosed after the release of Round 3 Seat Allotment. The closing ranks for DY Patil Akurdi JEE Main cutoff 2023 for BE for the Generl category are tabulated below:

JEE Main Last Round Closing Rank (General-All India)
Course	2023
B.E. in Computer Engineering	35755
B.E. in Mechanical Engineering	115226
B.E. in Electronics and Telecommunication Engineering	66165
B.E. in Civil Engineering	152209
B.E. in Information Technology	37925
B.E. in Instrumentation and Control Engineering	196291
B.E. in Artificial Intelligence and Data Science	17061
B.E. in Robotics and Automation	76065

Upvote

Q: Can I get into DYPCOE for BTech Artificial Intelligence & Data Science if my rank is between 100000 and 105000?

For the last year, the closing rank for BE in Artificial Intelligence and Data Science was 104159 which is very close to this range. This was for General category under All India quota. Unless the candidate belongs to some other category or domicile, one cannot afford to score less than this. With this rank, there is a probability of getting admission however since, the cut offs keep changing year on year, it is advisable to try to score better ranks to increase your chances of getting admission in DY Patil College of Engineering, Akurdi.

Upvote

DYPCOE Akurdi Pune Popular Programmes 2024

DY Patil College of Engineering offers BE, BTech, ME, and MTech programmes at the UG and PG levels, respectively. The college also offers PhD courses to students in various specialisations.

BE is one of the most popular programmes offered at DYPCOE Akurdi Pune. The college offers the BE programme in over seven major specialisations such as Computer Engineering, Electronics & Telecommunication Engineering, Mechanical Engineering, and Artificial Intelligence & Data Science, among others. The DYPCOE Akurdi BE programme is a full-time programme, offered for a duration of four years. The college also offers a BTech programme in Robotics and Automation.

The various career opportunities offered to DYPCOE Akurdi BE graduates include Business Intelligence Analyst, Data Analyst, Software Developer, etc. Below are some of the most popular DYPCOE Akurdi Pune courses, along with eligibility and selection criteria:

3.94 years#74 India TodayDegree by UNIPUNE - Savitribai Phule Pune University (SPPU)

Seats Offered

180

Exams Accepted

Median Salary

₹4.2 LPA

Total Tuition Fees

₹4.55 L

Get Fee Details

B.E. in Mechanical Engineering

4.14 years#74 India TodayDegree by UNIPUNE - Savitribai Phule Pune University (SPPU)

Seats Offered

120

Exams Accepted

Median Salary

₹4.2 LPA

Total Tuition Fees

₹4.55 L

Get Fee Details

View All 24 Courses

DYPCOE Akurdi Pune Admission Process and Important Dates 2024

DYPCOE Akurdi Pune course admissions are entrance-based. The institute offers the BE and BTech programmes at the UG level and the ME and MTech programmes at the PG level.

For admission to its BE and BTech programmes, DY Patil College of Engineering accepts MHT CET and JEE Main scores. Whereas, for admission to its MTech and ME programmes, the college accepts the GATE scores.

The mode of the DYPCOE Akurdi Pune application process is online. After qualifying for the respective entrance exams, interested candidates must apply for the relevant counselling sessions such as CAP Counselling to get admission to various courses offered by the college. Below mentioned are important dates for DYPCOE admissions:

For more information about D.Y. Patil College of Engineering, Akurdi check out the below video:

B.E. / B.Tech Admissions 2025

16 Courses3 years-4 years

Eligibility

10+2 with 45% aggregate
Accepting Exams: JEE Main, MHT CET

Important dates

Dates	Events
22 Jan '25 - 30 Jan '25	JEE Main 2025 Exam Date Session 1 - Paper 1
30 Jan '25	JEE Main 2025 Exam Date Session 1 - Paper 2Ongoing
30 Dec '24 - 15 Feb '25	MHT CET 2025 Application FormOngoing

M.E./M.Tech Admissions 2025

8 Courses2 years

Eligibility

Undergraduate Degree with 50% aggregate
Accepting Exams: GATE, MHTCET MTech

Important dates

Dates	Events
1 Feb '25	GATE 2025 Exam (CS1 \| AG \| MA \| CS2 \| NM \| MT \| TF \|IN)
2 Feb '25	GATE 2025 Exam (ME \| PE \| AR \| EE)
15 Feb '25	GATE 2025 Exam (CY \| AE \| DA \| ES \| PI \| EC \| GE \|XH \| BM \| EY)

Admission Details for all courses

DYPCOE Akurdi Pune Application Process 2024

DY Patil College of Engineering admission process begins with an online application. Interested students must fill out the online application for the respective courses on the official website of the college.

Follow the steps given below to submit the online application form:

Step 1: Visit the official website of the university and look for the ‘Admission’ tab in the navigation bar.

Step 2: Choose the 'Apply now' option from the drop-down menu.

Step 3: After clicking on it, you will be redirected to a new page.

Step 4: Fill in all the required details.

Step 5: Select the course you want to apply for.

Step 6: Pay the application fee, submit the required documents, and complete the application form.

View Application Process Details

DYPCOE Akurdi Pune
College comparison

Compare DYPCOE Akurdi Pune with other similar colleges

B.E. / B.Tech

M.E./M.Tech

College	Median Salary	Total Tuition Fees	Ranking
DYPCOE Akurdi Pune	₹ 4.2 LPA - 4.8 LPA	₹ 3.19 L - 4.55 L	#74 India Today, 2023
VIT Pune Compare	₹ 4.5 LPA - 7 LPA	₹ 4.88 L - 6.5 L	151-200 NIRF, 2023
DY Patil Institute of Technology Pune Compare	-/-	₹ 3.52 L - 3.6 L	151-200 NIRF, 2024
PICT Compare	₹ 7 LPA - 9.69 LPA	₹ 2.44 L - 3.13 L	-/-
College of Engineering Compare	₹ 9.75 LPA	₹ 68 K	#77 NIRF, 2024
PCCOE Compare	₹ 5.37 LPA	₹ 3.6 L - 4.97 L	251-300 NIRF, 2022

The values are of the latest years available with Shiksha. For more details, check detailed comparison

View comparisons

Top online courses offered by DYPCOE Akurdi Pune

DYPCOE Akurdi Pune FAQs

Q. How many courses does D.Y. Patil College of Engineering offers?

Q. Is D.Y. Patil College of Engineering affiliated with any university?

Q. What is the highest CTC offered during D.Y. Patil College of Engineering placements?

Q. What is the annual fees for D.Y. Patil College of Engineering Pune BE course?

Q. What is the eligibility criteria for D.Y. Patil College of Engineering ME course?

Q. What is the total seat intake for D.Y. Patil College of Engineering for BE and ME course?

Q. How many departments does D.Y. Patil College of Engineering ME course have?

Q. Is D.Y. Patil College of Engineering a government or a private institute?

Q. Which entrance exam is accepted by D.Y. Patil College of Engineering for admission to its BE course?

Q. Who are the top recruiters to visit D.Y. Patil College of Engineering placements?

Q. What is the admission procedure at D.Y. Patil College of Engineering?

A. D.Y. Patil College of Engineering offers a total of 22 courses in the Engineering stream. At UG four it offers a four-year BE course across eight specialisations and a two-year ME course across five specialisations.

A. D.Y. Patil College of Engineering is affiliated with Savitribai Phule Pune University.

A. The highest CTC offered during D.Y. Patil College of Engineering placements 2021 was Rs 12.5 LPA.

A. The annual fees of D.Y. Patil College of Engineering BE course is Rs 1.23 lakhs.

A. The eligibility criteria for D.Y. Patil College of Engineering ME admissions is that the candidate should have passed their BE/ BTech or equivalent degree from a recognised university with a minimum of 50% aggregate (45% for SC/ ST category students).

A. The total seat intake for D.Y. Patil College of Engineering BE and ME courses is 840 and 112, respectively.

A. There are a total of nine departments at D.Y. Patil College of Engineering across Engineering streams.

A. Established in 1984, D.Y. Patil College of Engineering Pune is a private Engineering college.

A. For admission to BE, candidates must have a valid JEE Main/ MHT CET score.

A. The top recruiters to visit D.Y. Patil College of Engineering placements include TCS, Infosys Technologies, Capgemini, etc.

A. The mode of D.Y. Patil College of Engineering application process is online. Candidates are required to fill the application form available on the official website of the college.

Content authored by: