M.E. in CAD/CAM
- Private Institute
- Estd. 2019
M.E. in CAD/CAM at PLITMS Overview
M.E. in CAD/CAM
at PLITMS
At the PG level, PLITMS provides a 2 years M.E. in CAD/CAM course to the students. To get admission to this course, aspiring students must meet the minimum eligibility requirements - 50.0% in graduation. The total cost for this course is INR 60448. This course offers admission to 6 students. Check out other courses available under M.E./M.Tech at PLITMS.
Duration | 2 years |
Course Level | PG Degree |
Mode of Course | Full Time |
Total Tuition Fees | ₹60,448 |
Seat breakup | 6 |
Type of University | Private |
M.E. in CAD/CAM at PLITMS Fees
M.E. in CAD/CAM
at PLITMS
| Fee components | Amount (2 years) |
|---|---|
Tuition fee is calculated on the basis of 1st year/semester. Actual amount may vary.
Mentioned fee is as per Fee Regulating Authority, Maharashtra State. | ₹ 60,448 |
₹ 60,448 |
These are based on information available on various sources. Latest values may differ.
M.E. in CAD/CAM at PLITMS Entry Requirements
M.E. in CAD/CAM
at PLITMS
General
Graduation
- 50%
- Read moreFor Maharashtra Candidature Candidate and All India Candidature Candidate:- Candidate must have passed Bachelor Degree in the relevant field of Engineering and Technology or Pharmacy from AICTE or Central or State Government approved institutions or equivalent, with the mentioned marks (at least 45% marks in case of candidates of Reserved categories, Economically Weaker Section and PwD category belonging to Maharashtra State).
MHTCET MTech
- N/A
GATE
- N/A
Other eligibility criteria
Candidate should be a citizen of India.
Candidate should have obtained Qualified score / non-Qualified marks in Graduates Aptitude Test in Engineering (GATE) conducted by the Indian Institute of Technology and valid for the current academic year.
For sponsored candidates, minimum of two years of full time work experience in a registered firm or company or industry or educational and or research institute or any Government Department or Government Autonomous Organization in the relevant field in which admission is being sought.
Or
Candidate should have minimum of two years of full time work experience in a registered firm or company or industry or educational and or research institute or any Government Department or Government Autonomous Organization in the relevant field in which admission is being sought; (These candidates shall be eligible for admission at institute level only).
Explore Courses offered by PLITMS
Select the Degree you are Interested in
Select the Stream you are Interested in
Other courses offered by PLITMS
4 years
View Other 12 Courses
Get best suited colleges for you in real-time
Here’s how it works:
Share your preferences with our assistant
Tell us about your city, course, budget & more
Get recommendations in no time
Discover best colleges that meet all your needs
It won’t take more than a minute!
Compare Courses From Similar Colleges
₹1.61 L
Overall Rating– / –
₹1.2 L
Overall Rating– / –
– / –
Overall Rating– / –
₹1 L
Overall Rating– / –
₹14 K
Overall Rating– / –
₹1.44 L
Overall Rating– / –
₹1.9 L
Overall Rating– / –
– / –
Overall Rating
3.6
3.6₹1.23 L
Overall Rating– / –
₹1.26 L
Overall Rating– / –
Similar courses in the same city
– / –
Overall Rating– / –
₹2.17 L
Overall Rating– / –
₹11 K
Overall Rating– / –
₹91.82 K
Overall Rating– / –
M.E. in Electrical Power System
Offered by Matsyodari Shikshan Sanstha's College of Engineering and Technology, Jalna₹84.44 K
Overall Rating– / –
₹52.01 K
Overall Rating– / –
M.E. in Digital Electronics
Offered by College of Engineering and Technology, Shegaon - Mauli's Group of Institutions₹67.09 K
Overall Rating– / –
M.Tech in Textile Engineering
Offered by Dattajirao Kadam Technical Education Society's Textile & Engineering Institute₹93.04 K
Overall Rating– / –
₹97.12 K
Overall Rating– / –
M.E. in CAD/CAM
at PLITMS
Student Forum
Anything you would want to ask experts?
M.E. in CAD/CAM at PLITMS Contact Information
M.E. in CAD/CAM
at PLITMS
Useful Links
Know more about PLITMS
Know more about Programs
- Engineering
- M.E./M.Tech
- Instrumentation Technology
- Food Technology
- Aeronautical Engineering
- Artificial Intelligence and Machine Learning
- Metallurgical Engineering
- MTech in Computer Science Engineering
- VLSI Design
- Petroleum Engineering
- Aerospace Engineering
- BTech in Biotechnology Engineering
- Pharmaceutical engineering
- Silk Technology
- Microelectronics