DY Patil Institute of Technology Pune
DY Patil Institute of Technology Pune Logo

B.E. in Mechanical Engineering 

  • A NAAC accredited
  • Private Institute
  • Estd. 1998

B.E. in Mechanical Engineering
 at 
DY Patil Institute of Technology Pune 
Overview

Duration

4 years

Course Level

UG Degree

Mode of Course

Full Time

Total Tuition Fees

3.60 Lakh

Official Website

Go to Website External Link Icon

Seat breakup

180

Type of University

Private

B.E. in Mechanical Engineering
 at 
DY Patil Institute of Technology Pune 
Fees

Fee componentsAmount (4 years)
3.60 Lakh
7.21 Lakh
10.81 Lakh
Info Icon

These are based on information available on various sources. Latest values may differ.

B.E. in Mechanical Engineering
 at 
DY Patil Institute of Technology Pune 
Curriculum

Latest curriculum for B.E. in Mechanical Engineering at DY Patil Institute of Technology Pune can be downloaded from the below link. The curriculum PDF has semester wise course structure, electives and detailed course content. You can also check course curriculum of other specializations offered in B.E. / B.Tech at DY Patil Institute of Technology Pune

B.E. in Mechanical Engineering
 at 
DY Patil Institute of Technology Pune 
Placements

ParticularsStatistics (2025)
Highest SalaryINR 24.00 Lakh
Lock IconTop Recruiters for DY Patil Institute of Technology Pune
ACCENTURE
Amazon
BirlaSoft
Bitwise
Bosch Ltd
CapGemini
Cognizant
Force Motors
GODREJ
HCL
Infosys
Interactive Brokers
Persistent
pwc
RBL Bank
TCS
UBS
Veritas
View placement details

B.E. in Mechanical Engineering
 at 
DY Patil Institute of Technology Pune 
 
Frequently Asked Questions

Q:   Can I get admission to Dr DY Patil Institute Of Technology in BTech Computer Engineering if my rank is between 85000 and 90000?

A: 

For last year, the closing rank for B.E. in Computer Engineering was 87269 which is very close to this range. This was for the General category under All India quota. Unless the candidate belongs to some other category or domicile, one cannot afford to score less than this. With this rank, there is a probability of getting admission. Since the cut offs keep changing year on year, it is advisable to try to score better ranks to increase your chances of getting admission to Dr. D. Y. Patil Institute Of Technology.

Thumbs Up IconUpvote Thumbs Down Icon

Q:   What is the average package for DY Patil Pimpri BTech CSE?

A: 

The Dr DY Patil Institute of Technology average package for CSE or other branches has not been released. However, the overall the highest and the lowest packages for the 2025 batch are out. Take a look at the table below to know the placement package details:

Particulars

Placement Statistics (2025)

Highest package

INR 24 LPA

Lowest package

INR 3.60 LPA

Thumbs Up IconUpvote Thumbs Down Icon

Q:   Does Dr. DY Patil Institute of Technology provide 100% placements for B.Tech?

A: 

The institute has not released the placement percentage. However, the number of students placed has been released. As per the official site, 109 students were placed during the 2025 drive. Earlier, 774 students were placed in 2024. The following table depicts the DY Patil Institute of Technology placement trends in terms of students placed:

Particulars

Placement Statistics (2023)

Placement Statistics (2024)

Placement Statistics (2025)

No. of students placed

1,037

774

109

Thumbs Up IconUpvote Thumbs Down Icon

Q:   Can I get admission to Dr DY Patil Institute Of Technology for BTech in Electrical Engineering if my rank is between 285000 and 290000?

A: 

For last year, the closing rank for B.E. in Electrical Engineering was 286201 which is very close to this range. This was for the General category under the All India quota. Unless the candidate belongs to some other category or domicile, one cannot afford to score less than this. With this rank, there is a probability of getting admission however since, the cut-offs keep changing year on year, it is advisable to try to score better ranks to increase your chances of getting admission to Dr. D. Y. Patil Institute Of Technology.

Thumbs Up IconUpvote Thumbs Down Icon

Q:   What are some of the key dates for DY Patil Institute of Technology MBA admission?

A: 

DY Patil Pimpri MBA admission dates 2024 have been announced by the exam conducting authorities. The application process has also begun for the year 2024. Given below are some of the important DY Patil Institute of Technology MBA admission dates:

  • ATMA 2024: Last date of application (May)- May 18, 2024
  • MAT 2024 IBT 1- May 19, 2024
  • ATMA 2024 Admit Card Release (May)- May 21, 2024
  • MAT 2024 IBT 2- May 24, 2024
  • ATMA 2024 May Session- May 25, 2024
  • ATMA 2024 Result Declaration (May)- May 30, 2024
  • ATMA 2024 June Session- Jun 23, 2024
  • ATMA 2024 Jul Session- Jul 21, 2024
  • MAT 2024 CBT- May 26, 2024

To check all the other entrance examination dates, candidates can click here

Thumbs Up IconUpvote Thumbs Down Icon

B.E. in Mechanical Engineering
 at 
DY Patil Institute of Technology Pune 
Entry Requirements

General
OBC
Requirements for 12th gradeUp Arrow Icon
  • 45%
MHT CETUp Arrow Icon
  • N/A
JEE MainUp Arrow Icon
  • N/A
Other eligibility criteriaUp Arrow Icon

B.E. in Mechanical Engineering
 at 
DY Patil Institute of Technology Pune 
Cutoffs

Filter Icon3
GenderDown Arrow Icon
QuotaDown Arrow Icon
CategoryDown Arrow Icon
JEE Main round-wise cutoff Rank: (General-All India)
Round202220232024
1537070202054158179
2265679177237166823
3-145022120420
MHT CET round-wise cutoff Rank: (General-All India)
Round201920202021
179.6671.0464.03
279.4666.4553.52
375.45--
View Cutoff Details

Explore Courses offered by DY Patil Institute of Technology Pune

Select the Degree you are Interested in
Select the Stream you are Interested in

Other courses offered by DY Patil Institute of Technology Pune

240
– / –
6
– / –
120
– / –
60
– / –
View Other 19 CoursesRight Arrow Icon

Get best suited colleges for you in real-time

Here’s how it works:
Share your preferences with our assistant

Tell us about your city, course, budget & more

Get recommendations in no time

Discover best colleges that meet all your needs

It won’t take more than a minute!
Read B.E. / B.Tech reviews from DY Patil Institute of Technology Pune
Read ReviewsRight Arrow Icon

B.E. in Mechanical Engineering
 at 
DY Patil Institute of Technology Pune 
Students Ratings & Reviews

4.3/5
Verified Icon52 Verified ReviewsInfo Icon
Placement Review IconPlacements4.2
Infrastructure Review IconInfrastructure4.4
Faculty Review IconFaculty & Course4.4
Crowd Review IconCampus Life4.1
Money Review IconValue for Money4.3
What students say about Dr. D. Y. Patil Institute Of Technology
Placements
Infrastructure
Faculty
Other
LikesView All
Top recruiting companies like Infosys, Capgemini, Cognizant, and Accenture visit the campus.
Based on 24 Reviews
P
Priya Sawardekar Verified Icon
B.E. in Mechanical Engineering - Batch of 2027
Offered by Dr. D. Y. Patil Institute Of Technology
5
5Placements5Infrastructure5Faculty5Crowd & Campus Life5Value for Money
Good facilities, good faculty.
Placements: 109 students were placed from campus. The highest package last year was 24 Lacs per annum and the average was 3 Lacs per annum. Top recruiting companies of last year were Siemens, JSW, Google, Wipro, Barclays, and Adani Group. Students need to find off-campus internships.
Infrastructure: Air-conditioned classrooms, all subject books are available in the library, practical labs of required subjects, and free Wi-Fi are available. Network issues can occur on some floors. Hostel rent is a bit expensive, but they have all the facilities a student might need.
Faculty: Faculty teaches each and every topic with details, and question banks are given before exams. Field trips to factories for more practical knowledge. The college is certified by NAAC and many more. All faculty helps with doubts. Mock practicals and viva are taken before final exams.
Other: The best thing about this course is that students get more practical knowledge. The college holds many events and clubs from which students can learn and enjoy, both at the same time.
Reviewed on 11 Nov 2024Read More
Thumbs Up IconThumbs Down Icon
Y
Yash Deshmukh Verified Icon
B.E. in Mechanical Engineering - Batch of 2026
Offered by Dr. D. Y. Patil Institute Of Technology
4.4
4Placements5Infrastructure5Faculty4Crowd & Campus Life4Value for Money
Best college in my POV for Mechanical Engineering in Pimpri Chinchwad.
Placements: Nearly 60-70% of students got placed in BE Mechanical Engineering. There are many criteria, such as some companies requiring an average CGPA of 7, while others require no live or past backlogs. Based on these criteria, students are sorted, and the decision in the interview is final. The highest package offered for BE Mechanical Engineering is 70 LPA, achieved by a student in the field of machine learning. The lowest package is 3 LPA, and the average package is 4.5 LPA. Top recruiting companies include TATA Motors, Mahindra, Ashok Leyland, Siemens, BOSCH, and Larsen & Toubro. Since internships are compulsory in the third year, nearly 60-70% of students get internships through the college, with the remaining students finding them on their own. Top roles offered include Design Engineer, Manufacturing Engineer, Maintenance Department, Aerospace, and Automobile.
Infrastructure: High-speed Wi-Fi is available in the college, limited to study and research work only. Dr. D Y Patil Institute of Technology Pimpri Pune is considered the best for BE Mechanical Engineering, with all necessary setups for practical work available and well-maintained labs. Classrooms are digital, equipped with smart boards, and facilities like fans and charging ports are available. The library is excellent, with all books mentioned in the official syllabus available. Students can borrow up to 2 books at a time for 15 days, with the option to renew if needed.
Faculty: Teachers are great, very helpful, and well-qualified, with many holding Ph.D. degrees. The course is well-designed to make students industry-ready, with a detailed syllabus. Semester exams are quite difficult but manageable with consistent study. The college follows the SPPU 2019 pattern for the current batch, with a new 2024 pattern applied for the upcoming students. The passing percentage in BE Mechanical Engineering is nearly 85%.
Other: I chose the college for its good placement rate and teaching quality. The labs for Mechanical Engineering are very well-equipped. The college hosts many events, such as Sanskriti, a traditional event. The campus has a good climate, and various scholarships, especially for girls, are available. Caste benefits are also applicable.
Reviewed on 25 Aug 2024Read More
Thumbs Up IconThumbs Down Icon
S
Saurabh Yawalkar Verified Icon
B.E. in Mechanical Engineering - Batch of 2026
Offered by Dr. D. Y. Patil Institute Of Technology
3.6
4Placements3Infrastructure4Faculty4Crowd & Campus Life3Value for Money
Good placement in 2024, decent Infrastructure, strict rules, and less practical knowledge.
Placements: I think the T&P cell of our college is one of the best cells in Pune. The average salary package was around 4-5 LPA. However, number of companies visiting our campus is impressive. Nearly 90% of the students who apply for placement secure jobs with good packages. Companies like Amazon, Capgemini, Accenture, Cognizant, Infosys, Ashok Leyland, and Adani visit our campus. Our college has an excellent placement rate and provides great exposure as well.
Infrastructure: College campus is relatively small, covering a total of five acres. It houses a pharmacy college, an MBA-MCA college, and an engineering college on the same premises. Engineering college occupies three acres of the campus. Campus provides facilities such as a canteen, a library, and a separate study room. Wi-Fi facilities are also available on the campus. Hostel facilities are provided, but the hostels are located outside the campus area.
Faculty: Faculty members are quite helpful and knowledgeable. Many of them are PhD. holders, which gives them excellent field knowledge. Teaching quality is decent. Since college is affiliated with Pune University, its course curriculum follows the SPPU-based structure. However, syllabus is quite outdated. Industry has advanced a lot, but the old syllabus does not prepare students well for current industry demands. Students need to put in extra effort on their own to secure good jobs. We have two semesters in a year, with two exams per semester. First is the In-Sem exam, carrying 30 marks for each subject. Second is the End-Sem exam, which carries 70 marks for each subject. Additionally, there are 25 marks for moral education and 50 marks for practical exams.
Other: I chose this course because I want to pursue a career in the mechanical engineering industry. This course provides good theoretical knowledge and decent basic practical knowledge in the field. However, syllabus content and marking system can be improved. Course could be designed to include more practical knowledge. Campus vibes are positive. There are many clubs to join in the college. Various events and fests are organized every year on the campus. Crowd is active and engaging. Numerous extracurricular and co-curricular activities take place annually, including cultural events, tech fests, Shivajayanti celebrations, and hackathons. College also offers scholarships to students from different castes and economically weaker sections to help them pay their college fees.
Reviewed on 18 Nov 2024Read More
Thumbs Up IconThumbs Down Icon
S
Sujit Taywade Verified Icon
B.E. in Mechanical Engineering - Batch of 2026
Offered by Dr. D. Y. Patil Institute Of Technology
5
5Placements5Infrastructure5Faculty5Crowd & Campus Life5Value for Money
It is one of the best college in Pune University because of the campus placements it offers .
Placements: Recently, the students of the 2023 batch got placed for an international placement in machine learning at the highest package of INR 70 Lacs per annum from the Mechanical Engineering Department. The college infrastructure is very good. Teachers support for students and teaching is understandable. Average placement is INR 6-7 Lacs per annum. Many students from the 2022 batch were hired by multinational corporations such as Microsoft. Nearly 90% of students get placement from this college.
Infrastructure: There are various clubs that help students develop their skills, such as entrepreneurship development, GDSE, Interceptors, etc. The college library is well equipped with its infrastructure and number of books. Labs are also well furnished with modern equipment.
Faculty: Faculty are very supportive, and teaching quality is excellent. All the syllabus is being covered in college itself. As it is affiliated with Savitribai Phule Pune University, semester exams are quite tough but can be cleared by regular study and hard work. It makes students industry-ready.
Other: Various events are organized by the college, such as Parakram, for various sports competitions.
Reviewed on 19 Jun 2023Read More
Thumbs Up IconThumbs Down Icon
T
Tushar Bhaskar Nikam Verified Icon
B.E. in Mechanical Engineering - Batch of 2025
Offered by Dr. D. Y. Patil Institute Of Technology
4.8
5Placements4Infrastructure5Faculty5Crowd & Campus Life5Value for Money
The college is good in terms of placements and teaching. Not good if you need good campus.
Placements: In mechanical branch 90% students were placed in core companies like mahindra, turb gas, cognizant, Tata. The highest package in mechanical branch was 18 Lacs per annum and the lowest was 3 Lacs per annum. Nearly 70% student got internship in core companies.
Infrastructure: In terms of College Building and Classrooms, infrastructure is best. But college campus is not big also there is not playground in college. Recently they have started the new construction so some hope for good campus. The hostel of college is best but not worth to the fees. It is better to get PG or room instead of hostel. The hostel fees are too much (2 Lacs per annum). .
Faculty: Some faculty members of college is experienced but some are new. Experienced faculty members are strict and good in their field. They teach really well. Some new faculty members are also best but some are just reading ppts and all. The exam culture of college is very strict and best. Exam are conducted really well.
Reviewed on 26 Dec 2022Read More
Thumbs Up IconThumbs Down Icon
View All 60 ReviewsRight Arrow Icon

Compare Courses From Similar Colleges

Similar courses in the same city

B.E. in Mechanical Engineering
 at 
DY Patil Institute of Technology Pune 
 
Students also asked

Q:   Can I take direct admission in Dy Patil Institute of Technology, Pune?

A: 

No, direct admission is not available at DY Patil Institute of Technology, Pune. Candidates are selected based on their entrance exam score. MHT-CET or JEE Main scores are required for BE admission. The selection for MBA is based on CAT, MAT, XAT, CMAT, ATMA or MAH MBA CET score. A valid GATE score is required for admission to ME programme. Once selected, candidates need to participate in CET Counselling. 

Thumbs Up IconUpvote Thumbs Down Icon

Q:   What are the different job profiles offered to ME graduates at DY Patil Institute of Technology?

A: 

After completing MTech at DY Patil Institute of Technology, candidates can easily find a job in research and development companies, manufacturing firms, and IT companies. Some of the candidates also prefer academic jobs such as teaching in a college or becoming a professor in the University. Candidates can also work as Lead Scientist or can also work as consultants.

To know more about the ME/ M.Tech course, Click here 

Thumbs Up IconUpvote Thumbs Down Icon

Q:   How are the placements for ME course at DY Patil Institute of Technology?

A: 

DY Patil Pune ME placements have been concluded by the institute for the year 2023 and according to the official website of the institute, a total of 1,037 students got placed. DY Patil Pimpri ME the highest package was INR 70 LPA and the lowest package was INR 2.40 LPA. Some of the major recruiters were Microsoft, Publicis Sapient, Kickdrum, Barclays etc.

Note: This information is sourced from official website/ sanctioning body and is subject to change.

In the absence of ME-specific placement, generic placement data has been taken.

Thumbs Up IconUpvote Thumbs Down Icon

Q:   Is entrance exam accepted for DY Patil Institute of Technology?

A: 

Yes, DY Patil Institute of Technology accepts national or state-level entrance exam scores for admission. Candidates applying for BE, must have a valid MHT-CET or JEE Main score. Admission to M.Tech is based on GATE score. For MBA, aspirants can get admission based on MAT, CAT, XAT, CMAT, ATMA or MAH MBA CET score.

Thumbs Up IconUpvote Thumbs Down Icon

Q:   How can I apply for admission at DY Patil Institute of Technology?

A: 

DY Patil Institute of Technology application process varies course-wise. Candidates have to apply for course-specific entrance exam for admission. Below are details for DYPIT Pune application process:

  • For BE, aspirants need to apply for MHT-CET or JEE Main followed by MHT-CET Counselling. The application fees of MHT CET 2024 for general/unreserved category students is INR 800.
  • For MBA, candidates need to apply for MAH MBA CET or any other Management entrance exam. Aspirants with a valid score need to then fill out the CET Counselling form.
  • For ME, candidates must fill out the application form for GATE. Candidates with a valid GATE score need to apply for MHT CET M.Tech Counselling.
Thumbs Up IconUpvote Thumbs Down Icon
qna

B.E. in Mechanical Engineering
 at 
DY Patil Institute of Technology Pune 

Student Forum

chatAnything you would want to ask experts?
Write here...

Answered a year ago

To determine the admission process and eligibility criteria for Dr. D. Y. Patil Institute of Technology for the B.E. in Mechanical Engineering program through the lateral entry based on a Diploma, it is best to check the official website or contact the admission department of the institute directly.

...more

S

Saloni Sharma

Contributor-Level 10

Answered 5 years ago

Hi, You can use this below free tool to get the list of all the colleges you might get admission based on the scores. Good luck. https://www.shiksha.com/b-tech/resources/jee-mains-college-predictor

13708167
Vijay Singh Kholiya

Guide-Level 15

Answered 6 years ago

The cut-off for mechanical engineering in Dr. D.Y Patil is 85.6%. However, it may go up or down as it varies according to the application.

S

Seema Dheer

Beginner-Level 4

Answered 6 years ago

Yes, we have 240 intake in mechanical engineering looking into number of seat and overall merit of JEE. It may be possible to get admission at Dr. D. Y. Patil Institute of Technology, Pimpri, Pune.

D

DYPIT patil

Beginner-Level 3

B.E. in Mechanical Engineering
 at 
DY Patil Institute of Technology Pune 
Contact Information

Address

Dr. D. Y. Patil Institute of Technology, Sant Tukaram Nagar,
Pune ( Maharashtra)

Phone
7767015942

(For general query)

7767015941

(For admission query)

Go to College Website ->