DY Patil Institute of Technology Pune
DY Patil Institute of Technology Pune Logo

B.E. in Mechanical Engineering 

  • A NAAC accredited
  • Private Institute
  • Estd. 1998

B.E. in Mechanical Engineering
 at 
DY Patil Institute of Technology Pune 
Overview

Duration

4 years

Course Level

UG Degree

Mode of Course

Full Time

Total Tuition Fees

3.60 Lakh

Official Website

Go to Website External Link Icon

Seat breakup

180

Type of University

Private

B.E. in Mechanical Engineering
 at 
DY Patil Institute of Technology Pune 
Fees

Fee componentsAmount (4 years)
3.60 Lakh
7.21 Lakh
10.81 Lakh
Info IconThese are based on information available on various sources. Latest values may differ.

B.E. in Mechanical Engineering
 at 
DY Patil Institute of Technology Pune 
Curriculum

Latest curriculum for B.E. in Mechanical Engineering at DY Patil Institute of Technology Pune can be downloaded from the below link. The curriculum PDF has semester wise course structure, electives and detailed course content. You can also check course curriculum of other specializations offered in B.E. / B.Tech at DY Patil Institute of Technology Pune

B.E. in Mechanical Engineering
 at 
DY Patil Institute of Technology Pune 
Placements

ParticularsStatistics (2025)
Highest SalaryINR 24.00 Lakh
Lock IconTop Recruiters for DY Patil Institute of Technology Pune
ACCENTURE
Amazon
BirlaSoft
Bitwise
Bosch Ltd
CapGemini
Cognizant
Force Motors
GODREJ
HCL
Infosys
Interactive Brokers
Persistent
pwc
RBL Bank
TCS
UBS
Veritas
View placement details

B.E. in Mechanical Engineering
 at 
DY Patil Institute of Technology Pune 
 
Frequently Asked Questions

Q:   Does Dr. DY Patil Institute of Technology provide 100% placements for B.Tech?

A: 

The institute has not released the placement percentage. However, the number of students placed has been released. As per the official site, 109 students were placed during the 2025 drive. Earlier, 774 students were placed in 2024. The following table depicts the DY Patil Institute of Technology placement trends in terms of students placed:

Particulars

Placement Statistics (2023)

Placement Statistics (2024)

Placement Statistics (2025)

No. of students placed

1,037

774

109

Thumbs Up IconUpvote Thumbs Down Icon

Q:   Can I get admission to Dr DY Patil Institute Of Technology in BTech Computer Engineering if my rank is between 85000 and 90000?

A: 

For last year, the closing rank for B.E. in Computer Engineering was 87269 which is very close to this range. This was for the General category under All India quota. Unless the candidate belongs to some other category or domicile, one cannot afford to score less than this. With this rank, there is a probability of getting admission. Since the cut offs keep changing year on year, it is advisable to try to score better ranks to increase your chances of getting admission to Dr. D. Y. Patil Institute Of Technology.

Thumbs Up IconUpvote Thumbs Down Icon

Q:   Can I get admission to Dr DY Patil Institute Of Technology for BTech in Electrical Engineering if my rank is between 285000 and 290000?

A: 

For last year, the closing rank for B.E. in Electrical Engineering was 286201 which is very close to this range. This was for the General category under the All India quota. Unless the candidate belongs to some other category or domicile, one cannot afford to score less than this. With this rank, there is a probability of getting admission however since, the cut-offs keep changing year on year, it is advisable to try to score better ranks to increase your chances of getting admission to Dr. D. Y. Patil Institute Of Technology.

Thumbs Up IconUpvote Thumbs Down Icon

Q:   What is the average package for DY Patil Pimpri BTech CSE?

A: 

The Dr DY Patil Institute of Technology average package for CSE or other branches has not been released. However, the overall the highest and the lowest packages for the 2025 batch are out. Take a look at the table below to know the placement package details:

Particulars

Placement Statistics (2025)

Highest package

INR 24 LPA

Lowest package

INR 3.60 LPA

Thumbs Up IconUpvote Thumbs Down Icon

Q:   Can I take direct admission in Dy Patil Institute of Technology, Pune?

A: 

No, direct admission is not available at DY Patil Institute of Technology, Pune. Candidates are selected based on their entrance exam score. MHT-CET or JEE Main scores are required for BE admission. The selection for MBA is based on CAT, MAT, XAT, CMAT, ATMA or MAH MBA CET score. A valid GATE score is required for admission to ME programme. Once selected, candidates need to participate in CET Counselling. 

Thumbs Up IconUpvote Thumbs Down Icon

B.E. in Mechanical Engineering
 at 
DY Patil Institute of Technology Pune 
Entry Requirements

General
OBC
Requirements for 12th gradeUp Arrow Icon
  • 45%
MHT CETUp Arrow Icon
  • N/A
JEE MainUp Arrow Icon
  • N/A
Other eligibility criteriaUp Arrow Icon

B.E. in Mechanical Engineering
 at 
DY Patil Institute of Technology Pune 
Cutoffs

Filter Icon3
GenderDown Arrow Icon
QuotaDown Arrow Icon
CategoryDown Arrow Icon
JEE Main round-wise cutoff Rank: (General-All India)
Round202220232024
1537070202054158179
2265679177237166823
3-145022120420
MHT CET round-wise cutoff Rank: (General-All India)
Round201920202021
179.6671.0464.03
279.4666.4553.52
375.45--
View Cutoff Details

Explore Courses offered by DY Patil Institute of Technology Pune

Select the Degree you are Interested in
Select the Stream you are Interested in

Other courses offered by DY Patil Institute of Technology Pune

240
– / –
6
– / –
120
– / –
60
– / –
View Other 19 CoursesRight Arrow Icon

Get best suited colleges for you in real-time

Here’s how it works:
Share your preferences with our assistant

Tell us about your city, course, budget & more

Get recommendations in no time

Discover best colleges that meet all your needs

It won’t take more than a minute!
Read B.E. / B.Tech reviews from DY Patil Institute of Technology Pune
Read ReviewsRight Arrow Icon

B.E. in Mechanical Engineering
 at 
DY Patil Institute of Technology Pune 
Students Ratings & Reviews

4.2/5
Verified Icon54 Verified ReviewsInfo Icon
Placement Review IconPlacements4.2
Infrastructure Review IconInfrastructure4.4
Faculty Review IconFaculty & Course4.4
Crowd Review IconCampus Life4.1
Money Review IconValue for Money4.2
What students say about Dr. D. Y. Patil Institute Of Technology
Placements
Infrastructure
Faculty
Other
LikesView All
Placements are very good in this college, Both core and IT companies visit in large numbers, and they are mostly doing mass recruitment.
Based on 24 Reviews
A
Atharva Gunjal Verified Icon
B.E. in Mechanical Engineering - Batch of 2026
Offered by Dr. D. Y. Patil Institute Of Technology
4
4Placements4Infrastructure5Faculty4Crowd & Campus Life3Value for Money
It is a well-known college with great infrastructure and teaching facilities.
Placements: Around 50-60% of students got placed in 2024 in our mechanical course. The highest salary package offered by a core company in our course is 70 LPA. The average salary package offered is around 4 LPA - 6 LPA. The lowest salary package offered is 4 LPA. Top recruiters for our course are Ashok Leyland, Tata, and JSW visit the college. Around 70% of students got internships from our course in core companies. Top roles offered are design engineer, production engineer, and many more.
Infrastructure: The infrastructure of the college is very good. It gives an aesthetic look. There is a Wi-Fi facility for students. Classrooms are advanced and have smart boards and air conditioning. Labs are well-maintained and have many machines. There is no sports ground on the college campus or other to play games. The hostel is also good. I don't know because I live in PG. A canteen is available on the college campus. Medical facilities are available outside the college campus.
Faculty: Teachers are very helpful, highly qualified, and doctorates. They have high knowledge which they give to students. The teaching quality is very good. This course curriculum is relevant and prepares students to survive in the industry with basic knowledge. The difficulty level of exams is not very difficult. The passing percentage is around 80-90%.
Reviewed on 25 Dec 2024Read More
Thumbs Up IconThumbs Down Icon
P
Priya Sawardekar Verified Icon
B.E. in Mechanical Engineering - Batch of 2027
Offered by Dr. D. Y. Patil Institute Of Technology
5
5Placements5Infrastructure5Faculty5Crowd & Campus Life5Value for Money
Good facilities, good faculty.
Placements: 109 students were placed from campus. The highest package last year was 24 Lacs per annum and the average was 3 Lacs per annum. Top recruiting companies of last year were Siemens, JSW, Google, Wipro, Barclays, and Adani Group. Students need to find off-campus internships.
Infrastructure: Air-conditioned classrooms, all subject books are available in the library, practical labs of required subjects, and free Wi-Fi are available. Network issues can occur on some floors. Hostel rent is a bit expensive, but they have all the facilities a student might need.
Faculty: Faculty teaches each and every topic with details, and question banks are given before exams. Field trips to factories for more practical knowledge. The college is certified by NAAC and many more. All faculty helps with doubts. Mock practicals and viva are taken before final exams.
Other: The best thing about this course is that students get more practical knowledge. The college holds many events and clubs from which students can learn and enjoy, both at the same time.
Reviewed on 11 Nov 2024Read More
Thumbs Up IconThumbs Down Icon
S
Saurabh Yawalkar Verified Icon
B.E. in Mechanical Engineering - Batch of 2026
Offered by Dr. D. Y. Patil Institute Of Technology
3.6
4Placements3Infrastructure4Faculty4Crowd & Campus Life3Value for Money
Good placement in 2024, decent Infrastructure, strict rules, and less practical knowledge.
Placements: I think the T&P cell of our college is one of the best cells in Pune. The average salary package was around 4-5 LPA. However, number of companies visiting our campus is impressive. Nearly 90% of the students who apply for placement secure jobs with good packages. Companies like Amazon, Capgemini, Accenture, Cognizant, Infosys, Ashok Leyland, and Adani visit our campus. Our college has an excellent placement rate and provides great exposure as well.
Infrastructure: College campus is relatively small, covering a total of five acres. It houses a pharmacy college, an MBA-MCA college, and an engineering college on the same premises. Engineering college occupies three acres of the campus. Campus provides facilities such as a canteen, a library, and a separate study room. Wi-Fi facilities are also available on the campus. Hostel facilities are provided, but the hostels are located outside the campus area.
Faculty: Faculty members are quite helpful and knowledgeable. Many of them are PhD. holders, which gives them excellent field knowledge. Teaching quality is decent. Since college is affiliated with Pune University, its course curriculum follows the SPPU-based structure. However, syllabus is quite outdated. Industry has advanced a lot, but the old syllabus does not prepare students well for current industry demands. Students need to put in extra effort on their own to secure good jobs. We have two semesters in a year, with two exams per semester. First is the In-Sem exam, carrying 30 marks for each subject. Second is the End-Sem exam, which carries 70 marks for each subject. Additionally, there are 25 marks for moral education and 50 marks for practical exams.
Other: I chose this course because I want to pursue a career in the mechanical engineering industry. This course provides good theoretical knowledge and decent basic practical knowledge in the field. However, syllabus content and marking system can be improved. Course could be designed to include more practical knowledge. Campus vibes are positive. There are many clubs to join in the college. Various events and fests are organized every year on the campus. Crowd is active and engaging. Numerous extracurricular and co-curricular activities take place annually, including cultural events, tech fests, Shivajayanti celebrations, and hackathons. College also offers scholarships to students from different castes and economically weaker sections to help them pay their college fees.
Reviewed on 18 Nov 2024Read More
Thumbs Up IconThumbs Down Icon
Y
Yash Deshmukh Verified Icon
B.E. in Mechanical Engineering - Batch of 2026
Offered by Dr. D. Y. Patil Institute Of Technology
4.4
4Placements5Infrastructure5Faculty4Crowd & Campus Life4Value for Money
Best college in my POV for Mechanical Engineering in Pimpri Chinchwad.
Placements: Nearly 60-70% of students got placed in BE Mechanical Engineering. There are many criteria, such as some companies requiring an average CGPA of 7, while others require no live or past backlogs. Based on these criteria, students are sorted, and the decision in the interview is final. The highest package offered for BE Mechanical Engineering is 70 LPA, achieved by a student in the field of machine learning. The lowest package is 3 LPA, and the average package is 4.5 LPA. Top recruiting companies include TATA Motors, Mahindra, Ashok Leyland, Siemens, BOSCH, and Larsen & Toubro. Since internships are compulsory in the third year, nearly 60-70% of students get internships through the college, with the remaining students finding them on their own. Top roles offered include Design Engineer, Manufacturing Engineer, Maintenance Department, Aerospace, and Automobile.
Infrastructure: High-speed Wi-Fi is available in the college, limited to study and research work only. Dr. D Y Patil Institute of Technology Pimpri Pune is considered the best for BE Mechanical Engineering, with all necessary setups for practical work available and well-maintained labs. Classrooms are digital, equipped with smart boards, and facilities like fans and charging ports are available. The library is excellent, with all books mentioned in the official syllabus available. Students can borrow up to 2 books at a time for 15 days, with the option to renew if needed.
Faculty: Teachers are great, very helpful, and well-qualified, with many holding Ph.D. degrees. The course is well-designed to make students industry-ready, with a detailed syllabus. Semester exams are quite difficult but manageable with consistent study. The college follows the SPPU 2019 pattern for the current batch, with a new 2024 pattern applied for the upcoming students. The passing percentage in BE Mechanical Engineering is nearly 85%.
Other: I chose the college for its good placement rate and teaching quality. The labs for Mechanical Engineering are very well-equipped. The college hosts many events, such as Sanskriti, a traditional event. The campus has a good climate, and various scholarships, especially for girls, are available. Caste benefits are also applicable.
Reviewed on 25 Aug 2024Read More
Thumbs Up IconThumbs Down Icon
G
Ganesh Patil Verified Icon
B.E. in Mechanical Engineering - Batch of 2028
Offered by Dr. D. Y. Patil Institute Of Technology
3.6
4Placements5Infrastructure3Faculty3Crowd & Campus Life3Value for Money
Very good Placements in 2022.
Placements: In 2022, from the Mechanical branch, the highest package offered to a student named Saurav Pawar was 70 LPA in Machine Learning. My college has above-average placements. In 2024, despite the recession, many students were placed in good companies like Infosys, Accenture, and many more with good packages around 5 to 30 LPA.
Infrastructure: I would say that for the fees you are paying, the infrastructure is well-maintained. Even though our campus is very small, it is neat and clean. There is ample space for parking, and there are 4-5 lifts to use. The washrooms are clean and well-maintained.
Faculty: Most of the teachers here are very knowledgeable in their respective subjects, but some of them are a bit arrogant and lack teaching skills. Still, every faculty member tries to clear all the doubts and queries of students. We also have one teacher guardian for every 20 students.
Other: I chose this course because I was interested in the mechanical branch, especially aerospace. The management of my college is just average, and they should improve it.
Reviewed on 29 Dec 2024Read More
Thumbs Up IconThumbs Down Icon
View All 62 ReviewsRight Arrow Icon

Compare Courses From Similar Colleges

Similar courses in the same city

B.E. in Mechanical Engineering
 at 
DY Patil Institute of Technology Pune 
 
Students also asked

Q:   What to do after JEE Main session 2 result?

A: 

Candidates preparing for IITs are only required to appear for the JEE Advanced entrance exam after qualifying JEE Main. Students who who secure above the 98th percentile in JEE Main 2024 Session 2 should start preparing for JEE Advanced 2025 immediately. Those who score between 95th and 98th percentile should focus on improving their JEE Main score by taking multiple mock tests and practicing previous year's question papers. By analysing their strengths and weaknesses, candidates can identify their areas of proficiency and topics where they need improvement. If they can achieve full marks in their practice sessions, they can start preparing for JEE Advanced. However, if they cannot score full marks, it is recommended that they appear for multiple mock test series for more practice. 

Q:   What is the expected JEE Main cutoff 2024?

A: 

NIT Manipur JEE Main cutoff 2024 has been released for admission to the BTech courses. During the Round 1 cutoff, the closing rank for CSE was 25886 for the General category students under the AII India Quota. Among OBC candidates, the closing rank for B.Tech. in Computer Science and Engineering stood at 8750. Candidates seeking admisison to NIT Manipur can refer to the table below to check out the Round 1 closing ranks for BTech in CSE course for various categories under the AI quota: 

Category

JEE Main 2024 Expected Cutoff

Common Rank List

90-91

Gen-EWS

75-76

OBC-NCL

73-74

SC

51-52

ST

37-38

PwD

0.0013527

Q:   What is the opening and closing rank for B.E. in Instrumentation Engineering at Dr. D. Y. Patil Institute Of Technology?

A: 

The opening and closing rank depends on the category and quota of candidates. For the General category under All India, opening rank was 191712 and closing rank was 434832. The cutsoffs are different when it comes to other categories or female candidates and even domicile of home state. Admission to B.E. in Instrumentation Engineering in Dr. D. Y. Patil Institute Of Technology is based on the scores obtained in the entrance exam JEE. Applicants are advised to confirm what category are they applying while checking for cut offs.

Thumbs Up IconUpvote Thumbs Down Icon

Q:   What are the courses offered at DY Patil Institute of Technology?

A: 

DY Patil Institute of Technology is a private institute affiliated to SPPU Pune, approved by AICTE, New Delhi & DTE Maharashtra. The institute offers courses at UG, PG and doctoral levels including BE, ME, MBA and PhD. The institute considers MHT-CET, MAH-CET, JEE Main, etc. for admission to specific courses.

Thumbs Up IconUpvote Thumbs Down Icon

Q:   How are the placements for ME course at DY Patil Institute of Technology?

A: 

DY Patil Pune ME placements have been concluded by the institute for the year 2023 and according to the official website of the institute, a total of 1,037 students got placed. DY Patil Pimpri ME the highest package was INR 70 LPA and the lowest package was INR 2.40 LPA. Some of the major recruiters were Microsoft, Publicis Sapient, Kickdrum, Barclays etc.

Note: This information is sourced from official website/ sanctioning body and is subject to change.

In the absence of ME-specific placement, generic placement data has been taken.

Thumbs Up IconUpvote Thumbs Down Icon
qna

B.E. in Mechanical Engineering
 at 
DY Patil Institute of Technology Pune 

Student Forum

chatAnything you would want to ask experts?
Write here...

Answered a year ago

To determine the admission process and eligibility criteria for Dr. D. Y. Patil Institute of Technology for the B.E. in Mechanical Engineering program through the lateral entry based on a Diploma, it is best to check the official website or contact the admission department of the institute directly.

...Read more

S

Saloni Sharma

Contributor-Level 10

Answered 5 years ago

Hi, You can use this below free tool to get the list of all the colleges you might get admission based on the scores. Good luck. https://www.shiksha.com/b-tech/resources/jee-mains-college-predictor

13708167
Vijay Singh Kholiya

Guide-Level 15

Answered 6 years ago

The cut-off for mechanical engineering in Dr. D.Y Patil is 85.6%. However, it may go up or down as it varies according to the application.

S

Seema Dheer

Beginner-Level 4

Answered 6 years ago

Yes, we have 240 intake in mechanical engineering looking into number of seat and overall merit of JEE. It may be possible to get admission at Dr. D. Y. Patil Institute of Technology, Pimpri, Pune.

D

DYPIT patil

Beginner-Level 3

B.E. in Mechanical Engineering
 at 
DY Patil Institute of Technology Pune 
Contact Information

Address

Dr. D. Y. Patil Institute of Technology, Sant Tukaram Nagar,
Pune ( Maharashtra)

Phone
7767015942

(For general query)

7767015941

(For admission query)

Go to College Website ->