M.Tech. in Plastics Technology
4.3 /5- Public/Government Institute
- Estd. 1968
M.Tech. in Plastics Technology at Central Institute of Plastics Engineering and Technology, Chennai Overview
M.Tech. in Plastics Technology
at Central Institute of Plastics Engineering and Technology, Chennai
Central Institute of Plastics Engineering and Technology, Chennai offers a 2 years M.Tech. in Plastics Technology course at the PG level. Central Institute of Plastics Engineering and Technology, Chennai M.Tech. in Plastics Technology admission is based on entry requirements - 50.0% in graduation. The total tuition fee for this course is INR 50000 for entire duration of the course. The course offers admission to 18 students. Check other courses of Central Institute of Plastics Engineering and Technology, Chennai M.E./M.Tech.
Duration | 2 years |
Course Level | PG Degree |
Mode of Course | Full Time |
Total Tuition Fees | ₹50,000 |
Official Website | Go to Website  |
Seat breakup | 18 |
Type of University | Public/Government |
M.Tech. in Plastics Technology at Central Institute of Plastics Engineering and Technology, Chennai Fees
M.Tech. in Plastics Technology
at Central Institute of Plastics Engineering and Technology, Chennai
| Fee components | Amount (2 years) |
|---|---|
The fees might include components other than tuition fees.
Mentioned fee is as per Tamil Nadu Engineering Admission (TNEA- 2023).
The mentioned fee is for Non-Accredited courses.
Only Accredited Fee w The fees might include components other than tuition fees.
Mentioned fee is as per Tamil Nadu Engineering Admission (TNEA- 2023).
The mentioned fee is for Non-Accredited courses.
Only Accredited Fee will be applicable if the program/courses is currently accredited by NBA. If not, then above mentioned fee will be applicable.
Total Accredited fee- INR 60000. | ₹ 50,000 |
₹ 50,000 |
These are based on information available on various sources. Latest values may differ.
M.Tech. in Plastics Technology at Central Institute of Plastics Engineering and Technology, Chennai Placements
M.Tech. in Plastics Technology
at Central Institute of Plastics Engineering and Technology, Chennai
Top Recruiters for Central Institute of Plastics Engineering and Technology, ChennaiBright Auto plast
Fanuc
Inventa Technologies
Reliance Industries Limited
Reynolds
VKC Group
M.Tech. in Plastics Technology at Central Institute of Plastics Engineering and Technology, Chennai Entry Requirements
M.Tech. in Plastics Technology
at Central Institute of Plastics Engineering and Technology, Chennai
General
SC
ST
Graduation
- 50%
- Read moreCandidate must have completed Bachelor’s Degree or equivalent in the relevant field and obtained atleast mentioned (45% in the case of BC, BCM, MBC, SC, SCA and ST candidates belonging to Tamilnadu)in the qualifying degree examination. (i) B.E. / B.Tech. / B.Arch. Degree Programmes (or) (ii) B.Pharm. Degree Programmes.
CEETA
- N/A
Other eligibility criteria
Candidate who have completed Master’s Degree in the relevant branch of Science / Arts, which are prescribed.
Or
Candidate who have completed 10 + 2 + AMIE + 2 Yrs of experience are also eligible to apply.
Explore Courses offered by Central Institute of Plastics Engineering and Technology, Chennai
Select the Degree you are Interested in
Select the Stream you are Interested in
Other courses offered by Central Institute of Plastics Engineering and Technology, Chennai
90
- – / –
– / –
– / –
View Other 6 Courses
Get best suited colleges for you in real-time
Here’s how it works:
Share your preferences with our assistant
Tell us about your city, course, budget & more
Get recommendations in no time
Discover best colleges that meet all your needs
It won’t take more than a minute!
Read M.E./M.Tech reviews from Central Institute of Plastics Engineering and Technology, Chennai
Read Reviews
D
Debasis mallick 
M.Tech. in Plastics Technology - Batch of 2021
Offered by Central Institute of Plastics Engineering and Technology, Chennai
5
5Placements5Infrastructure5Faculty5Crowd & Campus Life5Value for Money
The college is very good, and it known for its excellence and placements.
Placements: Maximum of our students get the best placements here as it is a rare branch in this engineering field. In our course, the average salary package offered is around 6 LPA, the lowest salary package offered is 3.5 LPA and the highest salary package offered is 12 LPA. Top recruiting companies of our course are Lohia Group of Companies, Kingfa, Time, Chem-Trend, etc. Almost everyone got an internship from our college, mostly in Indian Oil, GAIL and BPCL. Our course provides us with a job in various fields such as L&D department, teaching line and also junior fellowships.
Infrastructure: Our college infrastructure is excellent as compared to other colleges. Our college also provides a digital library for students who are seeking for more knowledge. Our classrooms are equipped with a projector, and all our classrooms are air-conditioned. Our hostel is Wi-Fi enabled and sanitised on a daily basis. Food quality is better from any other college hostel canteens. Medical facilities are also available here for our hostel students in any emergency. Many sports activities are conducted on our campus, such as indoor and outdoor, and there is a massive ground where you can conduct all these sports.
Faculty: Our teachers are well-qualified for this job. They are central government employees, and their processes of selection are based on their high knowledge. Teaching quality is awesome. You should opt for this college. This course is relevant because this is a vast industry in the market, and this must be known to everyone about it. It is a vast course, so our faculty members give a deep knowledge with which our students can set up their own industry.
Other: I have chosen this course because plastic engineering is a rare branch and has a vast use in the industry in making many products useful to mankind. The best thing about this course is it not only deals with plastic industry but also deals with petrochemical and fertilisers industries. Our course is better in its way, and I don't think it should be modified. Our college conducts Cipofest every year, and all CIPET colleges are invited to take part in these events. Campus crowd is generally more due to the diploma, undergraduate and postgraduate courses. There are many types of scholarships which you can apply according to your eligible criteria, and extracurricular activities such as robotics, debate, extemporaneous and standup comedy are also conducted here.
Reviewed on 9 Apr 2020Read More
VS
Venkateshwaran Subbiah
M.Tech. in Plastics Technology - Batch of 2017
Offered by Central Institute of Plastics Engineering and Technology, Chennai
3.6
4Placements3Infrastructure3Faculty3Crowd & Campus Life5Value for Money
Good placement in 2017, disappointing about manufacturing department faculty.
Placements: We had good placement for our batch, salary on average offered 25 thousand which was lower to our degree but still we are okay with the placement results, two of our batch mates got placed in hero motor corporation. Another two of us placed in kingfa Science and technology, the largest compounding industry in India and globe.
Infrastructure: We had good lab facility but few machine were very old and for few research work we had to depend on our another unit of Cipet Bhuvaneshwar, the twin screw extruder which we had in our Chennai campus is outdated one, we need to have more facility in Chennai campus for research work.
Faculty: We had good faculty for plastic depart and it was not same in the case of manufacturing department, they really need good lecturers, and Cipet management recruit them on contract basis, hence some time unqualified people get chance to work because of political back ground.
Other: Our events are not that standard as national institutes it is because of lack of funds, students collecting funds on their own efforts.
Reviewed on 3 Aug 2019Read More
View All 2 Reviews
Compare Courses From Similar Colleges
Similar courses in the same city
M.Tech. in Plastics Technology
at Central Institute of Plastics Engineering and Technology, Chennai
Student Forum
Anything you would want to ask experts?
Colleges in ChennaiCentral Institute of Plastics Engineering and Technology, ChennaiCoursesM.Tech. in Plastics TechnologyM.Tech. in Plastics Technology at Central Institute of Plastics Engineering and Technology, Chennai News & Updates
M.Tech. in Plastics Technology
at Central Institute of Plastics Engineering and Technology, Chennai
Latest
Popular
Jasleen Taneja · Jan 7, 2025
73.3K views
Jasleen Taneja · Jan 7, 2025
65.9K views
Jasleen Taneja · Jan 7, 2025
54.2K views
View all News & Updates
M.Tech. in Plastics Technology at Central Institute of Plastics Engineering and Technology, Chennai Contact Information
M.Tech. in Plastics Technology
at Central Institute of Plastics Engineering and Technology, Chennai
Address
T.V.K. Industrial Estate,
Guindy,
Chennai
Chennai ( Tamil Nadu)
Phone
Email
Go to College Website ->
Useful Links
Know more about Central Institute of Plastics Engineering and Technology, Chennai
- All About Central Institute of Plastics Engineering and Technology, Chennai
- Courses 2025
- Fees 2025
- Reviews on Placements, Faculty & Facilities
- Admission 2025 - Cutoffs, Eligibility & Dates
- Placement - Highest & Average Salary Package
- Cut off & Merit List 2025
- Infrastructure Details & Reviews
- Central Institute of Plastics Engineering and Technology, Chennai Faculty
- Compare Central Institute of Plastics Engineering and Technology, Chennai
- Central Institute of Plastics Engineering and Technology, Chennai Q&A
- Central Institute of Plastics Engineering and Technology, Chennai News & Articles
Know more about Programs
- Engineering
- M.E./M.Tech
- Instrumentation Technology
- Food Technology
- Aeronautical Engineering
- Artificial Intelligence and Machine Learning
- Metallurgical Engineering
- MTech in Computer Science Engineering
- VLSI Design
- Petroleum Engineering
- Aerospace Engineering
- BTech in Biotechnology Engineering
- Pharmaceutical engineering
- Silk Technology
- Microelectronics