CUET PG 2025 Chemistry Syllabus (OUT); Important Topics, Books & Download PDF

Planning to do MSc Chemistry? Or appearing for CUET PG 2025 Exam? NTA has released the CUET PG Chemistry syllabus 2025 on the official website. Aspirants must also check the eligibility criteria and exam pattern for the same here. Also, check out the article to get the complete CUET PG 2025 Chemistry Syllabus along with the best books and preparation strategy.

CUET PG 2025 Chemistry Syllabus Released

When you study from the syllabus, you are not just memorizing facts. You are also learning about the concepts and theories that underlie the subject. Preparing through CUET PG Chemistry syllabus 2025 can help you to develop a deeper understanding of chemistry and to better prepare for the exam. Aspirants preparing for the CUET PG MSc Chemistry should start their preparation according to the syllabus mentioned below:

i. There will be one Question Paper which will have 75 questions.
ii. All questions will be compulsory.
iii. From this year, the Question Paper will have only one part i.e. Part A (Domain Specific)
iv. Part B will have 75 questions based on Subject-Specific Knowledge.

Physical Chemistry

1. Gaseous State: Behavior of real gases: Deviations from ideal gas behavior, compressibility factor, and its variation with pressure for different gases. Causes of deviation from ideal behavior. van der Waals equation of state, its derivation and application in explaining real gas behaviour; van der Waals equation expressed in virial form, Boyle temperature. Isotherms of real gases and their comparison with van der Waals isotherms, continuity of states, critical state, critical and van der Waals constants, law of corresponding states. Kinetic molecular model of a gas: postulates and derivation of the kinetic gas equation; collision frequency; collision diameter; mean free path and viscosity of gases, including their temperature and pressure dependence, relation between mean free path and coefficient of viscosity, calculation of σ from η; variation of viscosity with temperature and pressure. Maxwell distribution and its use in evaluating molecular velocities (average, root mean square and most probable) and average kinetic energy, law of equipartition of energy, degrees of freedom and molecular basis of heat capacities.
2. Liquid State: Structure and physical properties of liquids; vapour pressure, surface tension, viscosity, and their dependence on temperature, Effect of addition of various solutes on surface
tension, cleansing action of detergents. Structure of water.
3. Ionic Equilibria: Strong, moderate and weak electrolytes, degree of ionization, factors affecting degree of ionization, ionization constant and ionic product of water. Ionization of weak acids and
bases, pH scale, common ion effect; dissociation constants of mono-, di- and tri-protic acids. Salt hydrolysis, hydrolysis constants, degree of hydrolysis and pH for different salts. Buffer solutions; Henderson equation, buffer capacity, buffer range, buffer action, applications of buffers in analytical chemistry, Solubility and solubility product Brönsted-Lowry concept of acid-base reactions, solvated proton, relative strength of acids, types of acid-base reactions, levelling solvents, Lewis acid-base concept, Classification of Lewis acids, Hard and Soft Acids and Bases (HSAB) Application of HSAB principle. Qualitative treatment of acid – base titration curves (calculation of pH at various stages). Theory of indicators; selection of indicators and their limitations. Multistage equilibria in polyelectrolytes.

4. Solid State: Nature of the solid state, law of constancy of interfacial angles, law of rational indices, Miller indices, elementary ideas of symmetry, symmetry elements and symmetry
operations, qualitative idea of point and space groups, seven crystal systems and fourteen Bravais lattices; X-ray diffraction, Bragg’s law, a simple account of rotating crystal method and powder pattern method. Analysis of powder diffraction patterns of NaCl, CsCl and KCl. Various types of defects in crystals, Glasses and liquid crystals.
5. Thermodynamics:  Intensive and extensive variables; state and path functions; isolated, closed and open systems; zeroth law of thermodynamics. First law: Concept of heat, q, work, w, internal energy, U, and statement of first law; enthalpy, H, relation between heat capacities, calculations of q, w, U and H for reversible, irreversible and free expansion of gases
(ideal and van der Waals) under isothermal and adiabatic conditions.
Thermochemistry:
Heats of reactions: standard states; enthalpy of formation of molecules and ions and enthalpy of combustion and its applications; calculation of bond energy, bond dissociation energy and resonance energy from thermochemical data, effect of temperature (Kirchhoff’s equations), pressure on enthalpy of reactions.
Second Law: Concept of entropy; thermodynamic scale of temperature, statement of the second law of thermodynamics; molecular and statistical interpretation of entropy. Calculation of
entropy change for reversible and irreversible processes.
Third law of thermodynamics: Third Law of thermodynamics, residual entropy, calculation of absolute entropy of molecules.

Free Energy Functions: Gibbs and Helmholtz energy; variation of S, G, A with T, V, P; Free energy change and spontaneity. Relation between Joule-Thomson coefficient and other thermodynamic parameters; inversion temperature; Gibbs-Helmholtz equation; Maxwell relations; thermodynamic equation of state.

Also Read:

• Best MSc Courses after BSc Through CUET PG; Know Subject Wise Details and Syllabus 
• Top 5 Science Entrance Exam Apart From CUET PG 

6. Partial molar quantities: Partial molar quantities, dependence of thermodynamic parameters on composition; GibbsDuhem equation, chemical potential of ideal mixtures, change in thermodynamic functions in mixing of ideal gases
7. Dilute solutions or Colligative Properties: Dilute solutions; lowering of vapour pressure, Raoult’s and Henry’s Laws and their applications. Excess thermodynamic functions. Thermodynamic derivation using chemical potential to derive relations between the four colligative properties: [(i) relative lowering of vapour pressure, (ii) elevation of boiling point, (iii) Depression of freezing
point, (iv) osmotic pressure] and amount of solute. Applications in calculating molar masses of normal, dissociated and associated solutes in solution.
8. Molecular Spectroscopy & Photochemistry
Unit-I
Interaction of electromagnetic radiation with molecules and various types of spectra; BornOppenheimer approximation. Rotation spectroscopy: Selection rules, intensities of spectral lines, determination of bond lengths of diatomic and linear triatomic molecules, isotopic substitution. Vibrational spectroscopy: Classical equation of vibration, computation of force constant, amplitude of diatomic molecular vibrations, anharmonicity, Morse potential, dissociation energies, fundamental frequencies, overtones, hot bands, degrees of freedom for polyatomic molecules, modes of vibration, concept of group frequencies. Vibration-rotation spectroscopy: diatomic vibrating rotator, P, Q, R branches.
Unit-II
Raman spectroscopy: Qualitative treatment of Rotational Raman effect; Effect of nuclear spin, Vibrational Raman spectra, Stokes and anti-Stokes lines; their intensity difference, rule of mutual exclusion. Electronic spectroscopy: Franck-Condon principle, electronic transitions, singlet and triplet states, fluorescence and phosphorescence, dissociation and predissociation.
Unit-III
Photophysical and photochemical processes: laws of photochemistry, quantum yield. Jablonski diagrams: Franck-Condon principle, Law of photochemical equivalence, quantum efficiency, low and high quantum efficiency. kinetics of photochemical reactions (H2 + Br2⇌HBr, 2HI ⇌ H2 + I2), energy transfer in photochemical reactions (photosensitization and quenching), fluorescence, phosphorescence, chemiluminescence, Discussion of Electronic spectra and photochemistry (Lambert-Beer law and its applications).
9. Chemical Kinetics
Order and molecularity of a reaction, rate laws in terms of the advancement of a reaction, differential and integrated rate laws for first, second and fractional order reactions, pseudounimolecular reactions, determination of the order, kinetics of complex reactions (limited to first order): (i) Opposing reactions (ii) parallel reactions and (iii) consecutive reactions and their differential rate equations (steady-state approximation in reaction mechanisms) (iv) chain reactions. Temperature dependence of reaction rates; Arrhenius equation; activation energy. Collision theory of reaction rates, Lindemann mechanism, qualitative treatment of the theory of absolute reaction rates.
10. Catalysis
Types of catalyst, specificity and selectivity, mechanisms of catalyzed reactions at solid surfaces; effect of particle size and efficiency of nanoparticles as catalysts. Enzyme catalysis, MichaelisMenten mechanism, acid-base catalysis.
11. Surface chemistry
Physical adsorption, chemisorption, adsorption isotherms (Freundlich, Temkin, Derivation of Langumuir adsorption isotherms, surface area determination), BET theory of multilayer adsorption (no derivation), Adsorption in solution
12. Phase Equilibria
Concept of phases, components and degrees of freedom, derivation of Gibbs Phase Rule for nonreactive and reactive systems; Clausius-Clapeyron equation and its applications to solid liquid, liquid-vapour and solid-vapour equilibria, phase diagram for one component systems, with applications. Phase diagrams for systems of solid-liquid equilibria involving eutectic, congruent and incongruent melting points, solid solutions. Three component systems, waterchloroform-acetic acid system, triangular plots. Binary solutions: Gibbs-Duhem-Margules equation, its derivation and applications to fractional distillation of binary miscible liquids (ideal and nonideal), azeotropes, lever rule, partial miscibility of liquids, CST, miscible pairs, steam distillation. Nernst distribution law: its derivation and applications.
13. Introduction to Quantum Chemistry:
Unit-I Introduction to black-body radiation and distribution of energy, photo-electic effect, concept of quantization, wave particle duality (de-Broglie’s hypothesis), The uncertainty principle, The wave function: wave function and its interpretation, conditions of normalization and Orthogonality and its significance. Basic idea about operators, eigen function and values, Schrodinger equation and application to free-particle and particle in a box, boundary conditions, wave functions and energies, degeneracy, hydrogen atom, Schrodinger equation in polar coordinates, radial and angular parts of the hydrogenic orbitals, degeneracies, spherical harmonics, representations of hydrogenic orbitals.

Unit-II: Quantitative treatment of simple harmonic osciallator model, setting up of Schodinger equation and discussion of solution of wave functions. Rigid rotator model and discussion
of application of Schrodinger equation. idea about transformation to spherical polar coordinate, discussion on solution.
Unit-III: Qualitative treatment of hydrogen atom and hydrogen-like ions: setting up of Schrödinger equation in spherical polar coordinates, radial part, quantization of energy (only final energy expression). Average and most probable distances of electron from nucleus. Valence bond and molecular orbital approaches, LCAO-MO treatment of H2, H2 + ; bonding and anti-bonding orbitals, Comparison of LCAO-MO and VB treatments of H2 (only wavefunctions, detailed solution not required) and their limitations.
14. Conductance: Arrhenius theory of electrolytic dissociation. Conductivity, equivalent and molar conductivity and their variation with dilution for weak and strong electrolytes. Molar conductivity at infinite dilution. Kohlrausch law of independent migration of ions. DebyeHückel-Onsager equation, Wien effect, Debye-Falkenhagen effect, Walden’s rules. Ionic velocities, mobilities and their determinations, transference numbers and their relation to ionic mobilities, determination of transference numbers using Hittorf and Moving Boundary methods. Applications of conductance measurement: (i) degree of dissociation of weak electrolytes, (ii) ionic product of water (iii) solubility and solubility product of sparingly soluble salts, (iv) conductometric titrations, and (v) hydrolysis constants of
salts.
15. Electrochemistry: Quantitative aspects of Faraday’s laws of electrolysis, rules of oxidation/reduction of ions based on half-cell potentials, applications of electrolysis in metallurgy and industry. Chemical cells, reversible and irreversible cells with examples. Electromotive force of a cell and its measurement, Nernst equation; Standard electrode (reduction) potential and its application to different kinds of half-cells. Application of EMF measurements in determining (i) free energy, enthalpy and entropy of a cell reaction, (ii) equilibrium constants, and (iii) pH values, using hydrogen, quinone-hydroquinone, glass and SbO/Sb2O3 electrodes. Concentration cells with and without transference, liquid junction potential; determination of activity coefficients and transference numbers. Qualitative discussion of potentiometric titrations (acid-base, redox, precipitation).

Candidates can check out the CUET PG 2025 important topics from here: CUET PG Important Topics: Check Course & Subject-wise Weightage Analysis 

Inorganic Chemistry
1. Atomic Structure: Bohr’s theory, its limitations and atomic spectrum of hydrogen atom. Wave mechanics: de’ Broglie equation, Heisenberg’s Uncertainty Principle and its significance,
Schrödinger’s wave equation, significance of ψ and ψ2. Quantum numbers and their significance. Normalized and orthogonal wave functions. Sign of wave functions. Radial and angular wave functions for hydrogen atom. Radial and angular distribution curves. Shapes of s, p, d and f orbitals. Contour boundary and probability diagrams. Pauli’s Exclusion Principle, Hund’s rule of maximum multiplicity, Aufbau’s principle and its limitations, Variation of orbital energy with atomic number.
2. Periodicity of Elements: s, p, d, f block elements, the long form of periodic table. Detailed discussion of the following properties of the elements, with reference to s and p-block.
(a) Effective nuclear charge, shielding or screening effect, Slater rules, variation ofeffective nuclear charge in periodic table.
(b) Atomic radii (van’der Waals)
(c) Ionic and crystal radii.
(d) Covalent radii (octahedral and tetrahedral)
(e) Ionization enthalpy, Successive ionization enthalpies and factors affecting ionization energy. Applications of ionization enthalpy.
(f) Electron gain enthalpy, trends of electron gain enthalpy.
(g)Electronegativity, Pauling, Mullikan, Allred Rachow scales, electronegativity and bond order, partial charge, hybridization, group electronegativity. Sanderson electrondensity ratio
3. Chemical Bonding
(i) Ionic bond: General characteristics, types of ions, size effects, radius ratio rule and its limitations. Packing of ions in crystals. Born-Landé equation with derivation, expression for lattice energy. Madelung constant, Born-Haber cycle and its application, Solvation energy.
(ii) Covalent bond: Lewis structure, Valence Shell Electron Pair Repulsion Theory (VSEPR), Shapes of simple molecules and ions containing lone-and bond-pairs of electrons multiple bonding, sigma and pi-bond approach, Valence Bond theory, (HeitlerLondon approach). Hybridization containing s, p and s, p, d atomic orbitals, shapes of hybrid orbitals, Bents rule, Resonance and resonance energy, Molecular orbital theory. Molecular orbital diagrams of simple homonuclear and heteronuclear diatomic molecules MO diagrams of simple tri and tetra-atomic molecules, e.g., N2, O2, C2, B2, F2, CO, NO, and their ions; HCl, BeF2, CO2, HCHO, (idea of s-p mixing and orbital interaction to be given). Covalent character in ionic compounds, polarizing power and polarizability. Fajan rules, polarization. Ionic character in covalent compounds: Bond moment and dipole moment. ionic character from dipole moment and electronegativities.

4. Metallic bonding and Weak chemical forces

(iii) Metallic Bond: Qualitative idea of free electron model, Semiconductors, Insulators.
(iv) Weak Chemical Forces: van’der Waals, ion-dipole, dipole-dipole, induced dipole dipoleinduced dipole interactions, Lenard-Jones 6-12 formula, hydrogen bond, effects of hydrogen bonding on melting and boiling points, solubility, dissolution.
5. Oxidation-Reduction and general principle of metallurgy: Redox equations, Standard Electrode Potential and its application to inorganic reactions. Occurrence of metals based on standard electrode potentials. Ellingham diagrams for reduction of metal oxides using carbon or carbon monoxide as reducing agent. Electrolytic Reduction, Hydrometallurgy. Methods of purification of metals: Electrolytic Kroll process, Parting process, van Arkel- de Boer process and Mond’s process, Zone refining.
6. Chemistry of s and p Block Elements: Inert pair effect, Relative stability of different oxidation states, diagonal relationship and anomalous behavior of first member of each group. Allotropy and catenation. Complex formation tendency of s and p block elements. Hydrides and their classification ionic, covalent and interstitial. Basic beryllium acetate and nitrate. Structure, bonding, preparation, properties and uses. Boric acid and borates, boron nitrides, borohydrides (diborane) carboranes and graphitic compounds, silanes, Oxides
and oxoacids of nitrogen, Phosphorus and chlorine. Per-oxo acids of Sulphur interhalogen compounds, polyhalide ions, pseudo-halogens, properties of halogens.
7. Noble Gases: Occurrence and uses, rationalization of inertness of noble gases, Clathrates; preparation and properties of XeF2, XeF4 and XeF6; Bonding in noble gas compounds (Valence bond and MO treatment for XeF2), Shapes of noble gas compounds (VSEPR theory).
8. Inorganic Polymers: Types of inorganic polymers, comparison with organic polymers, synthesis, structural aspects and applications of silicones and siloxanes. Borazines, silicates and phosphazenes, and polysulphates.

9. Coordination Chemistry: Werner’s theory, EAN rule, piano-stool compounds, valence bond theory (inner and outer orbital complexes), Crystal field theory, d-orbital splitting, weak and strong fields, pairing energies, factors affecting the magnitude of (Δ). Octahedral vs. tetrahedral coordination, tetragonal distortions from octahedral geometry Jahn-Teller theorem, square planar complexes, d orbital splitting in trigonal bipyramidal, square pyramidal and cubic ligand field environments, CFSE, Variation of lattice energies, enthalpies of hydration and
crystal radii variations in halides of first and second row transition metal series, Qualitative aspect of Ligand field theory, MO diagrams of representative coronation complexes, IUPAC nomenclature of coordination compounds, isomerism in coordination compounds. Stereochemistry of complexes with the coordination number 4 and 6, Chelate effect,
10. Transition Elements: General group trends with special reference to electronic configuration, colour, variable valency, magnetic and catalytic properties, and ability to form complexes. Stability of various oxidation states and e.m.f. (Latimer & Bsworth diagrams). Difference between the first, second and third transition series. Chemistry of Ti, V, Cr Mn, Fe and Co in various oxidation states (excluding their metallurgy)
11. Lanthanoids and Actinides: Electronic configuration, oxidation states, color, spectra and magnetic behavior, lanthanide contraction, separation of lanthanides (ion-exchange method only).
12. Bioinorganic Chemistry: Metal ions present in biological systems, classification of elements according to their action in biological system. Geochemical effect on distribution of metals. Sodium / Kpump, carbonic anhydrase and carboxypeptidase. Excess and deficiency of some trace metals. Toxicity of metal ions (Hg, Pb, Cd and As), toxicity, chelating agents in medicine. Iron and its application in biosystems, Haemoglobin; Storage and transfer of iron.
13. Organometallic Compounds: Definition and classification of organometallic compounds on the basis of bond type. Concept of hapticity of organic ligands. Metal carbonyls: 18 electron rule, electron count of mononuclear, polynuclear and substituted metal carbonyls of 3d series. General methods of preparation (direct combination, reductive carbonylation, thermal and
photochemical decomposition) of mono and binuclear carbonyls of 3d series. Structures of mononuclear and binuclear carbonyls of Cr, Mn, Fe, Co and Ni using VBT. piacceptor behaviour of CO (MO diagram of CO to be discussed), synergic effect and use of IR data to explain extent of back bonding.

Also Read: CUET PG: Check Predicted Question Paper And Analysis Here 

Organic Chemistry
1. Basics of Organic Chemistry: Organic Compounds: Classification, and Nomenclature, Hybridization, Shapes of molecules, Influence of hybridization on bond properties. Electronic Displacements: Inductive, electromeric, resonance and mesomeric effects, hyperconjugation and their applications; Dipole moment; Organic acids and bases; their relative strength. Homolytic and Heterolytic fission with suitable examples. Curly arrow rules, formal charges; Electrophiles and Nucleophiles; Nucleophlicity and basicity; Types, shape and relative stabilities of reaction intermediates (Carbocations, Carbanions, Free radicals and Carbenes). Organic reactions and their mechanism: Addition, Elimination and Substitution reactions.
2. Stereochemistry: Concept of asymmetry, Fischer Projection, Newmann and Sawhorse projection formulae and their interconversions; Geometrical isomerism: cis–trans and, syn-anti isomerism E/Z notations with C.I.P rules. Optical Isomerism: Optical Activity, Specific Rotation, Chirality/Asymmetry, Enantiomers, Molecules with two or more chiral-centres, Distereoisomers, meso structures, Racemic mixtures, Relative and absolute configuration: D/L and R/S designations.
3. Chemistry of Aliphatic Hydrocarbons: Carbon-Carbon sigma bonds Chemistry of alkanes: Formation of alkanes, Wurtz Reaction, Wurtz- Fittig Reactions, Free radical substitutions: Halogenation - relative reactivity and selectivity. Carbon-Carbon pi-bonds. Formation of alkenes and alkynes by elimination reactions, Mechanism of E1, E2, E1cb reactions. Saytzeff and Hofmann eliminations. Reactions of alkenes: Electrophilic additions their mechanisms (Markownikoff/ Anti Markownikoff addition), mechanism of oxymercuration demercuration, hydroboration- oxidation, ozonolysis, reduction (catalytic and chemical), syn and anti-hydroxylation (oxidation). 1, 2- and 1, 4- addition reactions in conjugated dienes and, DielsAlder reaction; Allylic and benzylic bromination and mechanism, e.g. propene, 1-butene, toluene, ethyl benzene. Reactions of alkynes: Acidity, Electrophilic and Nucleophilic additions.
4. Cycloalkanes and Conformational Analysis: Cycloalkanes and stability, Baeyer strain theory, Conformation analysis, Energy diagrams of cyclohexane: Chair, Boat and Twist boat forms.
5. Aromatic Hydrocarbons: Aromaticity: Huckel’s rule, aromatic character of arenes, cyclic carbocations/carbanions and heterocyclic compounds with suitable examples. Electrophilic aromatic substitution: halogenation, nitration, sulphonation and Friedel-Craft’s alkylation/acylation with their mechanism. Directing effects of substituent groups.
6. Chemistry of Halogenated Hydrocarbons: Alkyl halides: Methods of preparation, nucleophilic substitution reactions – SN1, SN2 and SNi mechanisms with stereochemical aspects and effect of solvent etc.; nucleophilic substitution vs. elimination. Aryl halides: Preparation, including preparation from diazonium salts. nucleophilic aromatic substitution; SNAr, Benzyne mechanism. Relative reactivity of alkyl, allyl/benzyl, vinyl and aryl halides towards nucleophilic substitution reactions. Organometallic compounds of Mg and Li and their use in synthesis.
7. Alcohols, Phenols, Ethers and Epoxides: Alcohols: preparation, properties and relative reactivity of 1°, 2°, 3° alcohols, BouvaeltBlanc Reduction; Preparation and properties of glycols: Oxidation by periodic acid and lead tetraacetate, Pinacol-Pinacolone rearrangement. Phenols: Preparation and properties; Acidity and factors effecting it, Ring substitution reactions, Reimer–Tiemann and Kolbe’s–Schmidt Reactions, Fries and Claisen rearrangements with mechanism. Ethers and Epoxides: Preparation and reactions with acids. Reactions of epoxides with alcohols, ammonia derivatives and LiAlH4
8. Carbonyl Compounds: Structure, reactivity and preparation; Nucleophilic additions, Nucleophilic additionelimination reactions with ammonia derivatives with mechanism; Mechanisms of Aldol and Benzoin condensation, Knoevenagel condensation, Claisen-Schmidt, Perkin, Cannizzaro and Wittig reaction, Beckmann and Benzil-Benzilic acid rearrangements, haloform reaction and Baeyer Villiger oxidation, α-substitution reactions, oxidations and reductions (Clemmensen, WolffKishner, LiAlH4, NaBH4, MPV, PDC and PGC); Addition reactions of unsaturated carbonyl compounds: Michael addition. Active methylene compounds: Keto-enol tautomerism. Preparation and synthetic applications of diethyl malonate and ethyl acetoacetate.
9. Carboxylic Acids and their Derivatives:  Preparation, physical properties and reactions of monocarboxylic acids: Typical reactions of dicarboxylic acids, hydroxy acids and unsaturated acids: succinic/phthalic, lactic, malic, tartaric, citric, maleic and fumaric acids; Preparation and reactions of acid chlorides, anhydrides, esters and amides; Comparative study of nucleophilic substitution at acyl group -Mechanism of acidic and alkaline hydrolysis of esters, Claisen condensation, Dieckmann and Reformatsky reactions, Hofmann bromamide degradation and Curtius rearrangement.
10. Sulphur containing compounds:  Preparation and reactions of thiols, thioethers and sulphonic acids
11. Nitrogen Containing Functional Groups: Preparation and important reactions of nitro and compounds, nitriles and isonitriles Amines: Effect of substituent and solvent on basicity; Preparation and properties: Gabriel phthalimide synthesis, Carbylamine reaction, Mannich reaction, Hoffmann’s exhaustive methylation, Hofmann-elimination reaction; Distinction between 1°, 2° and 3° amines with Hinsberg reagent and nitrous acid. Diazonium salts: Preparation and synthetic applications.
12. Polynuclear Hydrocarbons: Reactions of naphthalene phenanthrene and anthracene Structure, Preparation and structure elucidation and important derivatives of naphthalene and anthracene; Polynuclear hydrocarbons.
13. Heterocyclic Compounds: Classification and nomenclature, Structure, aromaticity in 5-numbered and 6-membered rings containing one heteroatom; Synthesis, reactions and mechanism of substitution reactions of Furan, Pyrrole (Paal-Knorr synthesis, Knorr pyrrole synthesis, Hantzsch synthesis), Thiophene, Pyridine (Hantzsch synthesis), Pyrimidine, Structure elucidation of indole, Fischer indole synthesis and Madelung synthesis), Structure elucidation of quinoline and isoquinoline, Skraup synthesis, Friedlander’s synthesis, Knorr quinoline synthesis, Doebner-Miller synthesis, Bischler-Napieralski reaction, Pictet-Spengler reaction, Pomeranz-Fritsch reaction Derivatives of furan: Furfural and furoic acid.
14. Alkaloids: Natural occurrence, General structural features, Isolation and their physiological action Hoffmann’s exhaustive methylation, Emde’s modification, Structure elucidation and synthesis of Hygrine and Nicotine. Medicinal importance of Nicotine, Hygrine, Quinine, Morphine, Cocaine, and Reserpine
15. Terpenes: Occurrence, classification, isoprene rule; Elucidation of stucture and synthesis of Citral, Neral and α-terpineol. 

16. Organic Spectroscopy: 

Basic Principles of UV Spectroscopy: Application of Woodward-Fiser rule in interpretation of Organic compounds: Application of visible, ultraviolet and infrared spectroscopy in organic molecules. Electromagnetic radiation, electronic transitions, λmax & εmax, chromophore, auxochrome, bathochromic and hypsochromic shifts. Application of electronic spectroscopy and Woodward rules for calculating λmax of conjugated dienes and α,β – unsaturated compounds.
Basic principles of IR Spectroscopy: Identification of Functional groups of various classes of organic compounds: Infrared radiation and types of molecular vibrations, functional group and fingerprint region. IR spectra of alkanes, alkenes and simple alcohols (inter and intramolecular hydrogen bonding), aldehydes, ketones, carboxylic acids and their derivatives (effect of substitution on >C=O stretching absorptions). NMR (1 H and 13C NMR): Application of Chemical Shifts, Splitting of signals, Spin coupling and Over Houser effect in interpretation of NMR spectra, Isotopic exchange
Basic principles Mass Spectrometry: Application of fragmentation rule in characterization of organic compounds. Problems on structure elucidation of organic compounds based on spectral data.

Also Read: 7 Reasons Why to Give CUET PG Exam 

CUET PG Chemistry Syllabus 2025 PDF Download

Candidates can download the CUET PG Chemistry syllabus 2025 pdf from here:

CUET PG Chemistry Syllabus Download

CUET PG 2025 Exam Structure 

CUET PG 2025 exam pattern has been revised. The exam duration has been reduced to 90 minutes from 105 minutes. CUET PG 2025 exam will be conducted online in the form of multiple choice questions (MCQs). The following table brings the structure of the CUET PG 2025 Chemistry question paper.

Part	Sections/Subjects	Number of Questions
A	Domain knowledge (Chemistry)	75

CUET PG 2025 Chemistry: Eligibility Criteria

Candidates can find the general minimal eligibility criteria for MSc Chemistry course below. The university-specific criteria for the same may differ, therefore candidates are advised to check the information brochure for university-specific eligibility criteria before applying for MSc Data Science Course.

Age Limit

For appearing in the CUET (PG) 2025, there is no age limit for the candidates. The candidates who have passed the bachelor's degree/equivalent examination or appearing in 2025 irrespective of their age can appear in master’s degree programmes in the Central Universities through CUET (PG) 2025 examination. However, the candidates will be required to fulfil the age criteria of the University to which they are desirous of taking admission.

Educational Qualification:

• Delhi Technological University: BA/B.Sc. (Gen. Or Hons.) with 55% or equivalent CGPA provided by the concerned Institute/University with Chemistry as one of the main subjects. (Relaxation of 5% to the SC/ST/PwD candidates).
• Central University of Haryana: B.Sc. (Hons.) Chemistry from any recognized Indian or Foreign University (Foreign recognition to be as per AIU list) with 50% or above marks or equivalent grade in aggregate. Or Graduation in any branch of Science, B.Voc or Engineering with Chemistry and Biology/Mathematics as two of the subjects of study with 55% or above marks in aggregate (Relaxation of 5% to the SC/ST/PWD/ OBC (Non-Creamy Layer) candidates).
• Jawaharlal Nehru University: Bachelor’s degree (with Chemistry as one of the subjects) under the 10+2+3 pattern of education with 55% marks in the aggregate (or in Chemistry, Physics and Mathematics combined), or in Chemistry Honours. Applicants with B.Tech. degree (or equivalent) in Chemical/Polymer/Petroleum Engineering with a CGPA of at least 6.0 out of 10.0 (or equivalent percentage). (All OBC category (non creamy layer) candidates are eligible to 10% relaxation in the percentage of marks in the qualifying examination in relation to open category. The SC/ST and Person with Disability (PWD) candidates who have passed the qualifying examination irrespective of their percentage of marks are eligible to appear in theEntrance Examination.)
• Banaras Hindu University: B.Sc. (Hons.)/ B.Sc. under 10+2+3 pattern securing a minimum of 50% marks in the aggregate in Science subjects (considering all the three years of B.Sc.Course). The subject in which admission is sought must be Hons. subject at B.Sc.(Hons.) level/a subject studied in all the three years at Graduate level.

Candidates can go through the detailed eligibility criteria from here: CUET PG Eligibility Criteria:  Age Limit, University- Wise Degree Requirement & Qualification 

Best Books for CUET PG Chemistry

While preparing for CUET PG 2025 Chemistry exam, aspirants can refer to the below mentioned list of books:

Chemical Bonding

• Lee, J.D. Concise Inorganic Chemistry, Pearson Education 2010
• Huheey, J.E., Keiter, E.A., Keiter, R. L., Medhi, O.K. Inorganic Chemistry, Principles of Structure and Reactivity, Pearson Education 2006.
• Douglas, B.E. and Mc Daniel, D.H., Concepts & Models of Inorganic Chemistry, Oxford, 1970
Physical Chemistry

• Khosla, B. D.; Garg, V. C. & Gulati, A. Senior Practical Physical Chemistry, R. Chand & Co.: New Delhi (2011).
• Garland, C. W.; Nibler, J. W. & Shoemaker, D. P. Experiments in Physical Chemistry 8th Ed.; McGraw-Hill: New York (2003).
• Halpern, A. M. & McBane, G. C. Experimental Physical Chemistry 3rd Ed.; W.H. Freeman & Co.: New York (2003).

Organic Chemistry

• Mann, F.G. & Saunders, B.C. Practical Organic Chemistry, Pearson Education (2009)
• Furniss, B.S.; Hannaford, A.J.; Smith, P.W.G.; Tatchell, A.R. Practical Organic
Chemistry, 5th Ed., Pearson (2012)

Central University Entrance Test (Postgraduate) or CUET PG is an all-India level entrance exam which is being introduced for admission into PG programmes in Central and participating Universities. The Common University Entrance Test (CUET) will provide a common platform and equal opportunities to candidates across the country, especially those from North East and from rural and other remote areas and help to establish better connect with the Universities. A single Examination will enable the Candidates to cover a wide outreach and be part of the admissions process to various Central Universities. 

Also Read: CUET PG Best Books: Check Subject Wise Books for Preparation 

Advantages By Preparing Through Chemistry Syllabus

• It provides a blueprint for the exam: The CUET PG syllabus is a comprehensive document that outlines the topics and concepts that will be covered in the exam. By studying from the syllabus, you can ensure that you are covering all of the important material.
• It helps you to focus your studies: The syllabus can help you to identify the areas where you need to focus your studies. This is especially important if you are short on time, as you can focus on the most important topics.
• It helps you to understand the exam format: The syllabus also provides information about the exam format, such as the types of questions that will be asked and the number of questions per section. This information can help you to prepare for the exam and to develop effective test-taking strategies.
• It helps you to assess your progress: The syllabus can also be used to assess your progress as you prepare for the exam. You can mark off the topics that you have covered and identify the areas where you need to focus more attention.

CUET PG Syllabus 2025: Subject Wise

NTA, has divided the CUET PG syllabus into 6 domains of subject courses. The domains are as follow: Acharya, Common Humaties, Languages, MTech and Science stream. The domain's subject specific syllabus and question paper are mentioned below:

CUET PG Subject Course	CUET PG Syllabus PDF
Zoology	CUET PG Zoology Syllabus PDF
Biochemistry	CUET PG Biochemistry Syllabus PDF
Chemistry	CUET PG Chemistry Syallabus PDF
Life Sciences	CUET PG Life Science Syllabs PDF
Mathematics	CUET PG Mathematics Syllabus PDF
Data Science	CUET PG Data Science Syllabus PDF
Food Technology	CUET PG Food Technology Syllabus PDF
Plant Biotechnology	CUET PG Plant Biotechnology Syllabus PDF
Physics	CUET PG Physics Syllabus PDF
Botany	CUET PG Botany Syllabus PDF
Environmental Science	CUET PG Environmental Science Syllabus
Horticulture	CUET PG Horticulture Syllabus PDF
MA Social Work	CUET PG MSW Syllabus PDF
Forensic Science & Criminology	CUET PG Forensic Science & Criminology Syllabus
MA History	CUET PG History Syllabus 2025: Important Topics, PDF Link find here
MBA	CUET PG MBA Syllabus PDF
MA	CUET PG MA Syllabus PDF
MTech	CUET PG MTech Syllabus PDF
MCA	CUET PG MCA Syllabus PDF

Read More:

• Science colleges accepting CUET-PG in India
• M.Sc. colleges accepting CUET-PG in India
• MBA Colleges Accepting CUET PG Scores in India