HBTU Kanpur UG, PG, Doctorate Courses 2025

There are a total of 750 seats for BTech programmes of HBTU Kanpur. The seat allotment is done based on sanctioned seat intake and as per the selection criteria. Find below the specialisation-wise HBTU BTech seat intake:

Yes, Harcourt Butler Technical University offer BTech (lateral) programmes. These are three-year courses, wherein students get admission directly in the second-year of the course. To be eligible for BTech (Lateral) course admission, aspirant must fulfil the eligibility requirements.  For BTech Lateral Entry, aspirants need to pass CUET exam and should have a three-year Engineering Diploma with a minimum of 60% aggregate.

There are multiple components included in the HBTU MBA fee structure, such as tuition fee, security deposit, hostel fee, etc. Some of the fee components are one-time chargeable. While some charges have to be paid annually/semester, such as tuition fee. The following table showcases HBTU MBA fee structure:

NOTE: The aforementioned fee is taken from the official website/sanctioning body. It is still subject to changes and hence, is indicative.

As per the latest reports, the HBTU Kanpur the highest package for the 2023 drive stood at INR 36 LPA. In 2022, the highest package was almost 19% higher and the amount offered was INR 44.50 LPA. The HBTU Kanpur average package for the 2023 recruitment process was INR 9.30 LPA, which was almost 5% higher in comparison to 2022 average salary. Take a look at the below table depicting the HBTU placement package for the past three years:

Harcourt Butler Technical University has not released course-wise placement statistics as of now. The key highlights of HBTU Kanpur placements in 2023 (overall) are mentioned below:

Read more: HBTU Placements 2023

In order to decide which college/institute is better, it is ideal to consider certain statistics. The table below showcases the 2023 placement statistics of HBTU in comparison to IIITs such as IIIT Hyderabad, IIIT Pune, and IIIT Lucknow:

Considering the above data, the placements are better at IIITs. However, candidates can consider other factors as well in order to make a decision. 

Yes, Harcourt Butler Technical University (HBTU) offers a two-year MBA course. It is offered in a full-time mode of study. All eligible Indian residents can apply for this programme. Aspirants can apply by visiting the university's official website. The entrance exams accepted for this course are CAT/CMAT/AIMA-MAT/CUET-PG. Candidates who get shortlisted based on entrance score have to further take part in the group discussion and personal interview round. 

The university admit candidates to its BBA programme based on merit in CUET-UG exam. After conclusion of application process, university releases a list of CUET shortlisted candidates. A final list is released after the fee deposition. Further, if seats are left vacant, then a list of candidates eligible for university entrance exam is released. Selected candidates need to appear for this exam. After this exam, selected Non-CUET candidates list is released along with a waiting list. 

Admission to HBTU Kanpur BTech programmes is based on merit in JEE Main. However, for the BTech Biotechnology course, the scores of CUET are accepted for selection. Shortlisted candidates are further called for a counselling round, during which seat allotment is carried out. Candidates who have passed Class 12 with at least 55% aggregate (50% aggregate for reserved category) in PCM are eligible to apply. The eligible students can further visit the HBTU official website to register and fill out the admission form. 

Admissions to HBTU Kanpur MCA course is done on the basis of merit in National Institute of Technology Master of Computer Applications Common Entrance Test (NIMCET) or CUET-PG. Hence, the seat allotment process is carried out based on the applicants NIMCET rank. To take this test, candidates need to register online on its official website. Moreover, candidates also need to register on the university official website for this course and submit the application successfully by paying the fee.

HBTU BTech cut-off is released as the last rank in JEE (Main) at which the admission will be provided. The cut-off varies across the BTech specialisations offered at the university.

In 2024, the cut-off displayed a declining trend, implying a decrease in competition for course admission. The JEE Main cut-off for the last round of HBTU BTech admission 2024 (General-All India Category) for various specialisations is presented in following table:

The application forms are accepted in online mode by the university. Candidates must submit the admission within the prescribed due date. For offline application, aspirants shall contact the admission office of the university. The steps to apply for HBTU BTech courses are as follows:

Step 1: Visit the HBTU official website.

Step 2: Click on ‘Admission 2025-26’.

Step 3: Click on the available online registration link.

Step 4: Select ‘New Application’.

Step 5: Select the preferred course.

Step 6: Select the preferred school, and course and enter the Aadhar card number.

Step 7: Fill out the application form.

Step 8: Pay the application fee and submit the application form.

Harcourt Butler Technical University JEE Main cutoff was concluded after Round 6. As per the last round cutoff 2023, the minimum cutoff for HBTU BTech in CSE was 22059. The last round cutoff 2022 for HBTU BTech in CSE was 21190 for the General All India Category Students. Candidates can refer to the table given below to check out the HBTU BTech cutoff for the year 2023, 2022 and 2021: 

The application fees for JEE Main is

• INR 1,000 (Male unreserved/OBC/EWS category)
• INR 800 (Female unreserved/OBC/EWS category)
• INR 500 (SC/ST/PwD/Transgender category)

Candidates have the option of paying the application fee online through credit/debit card and internet banking. The application form will not be considered submitted until the application fees is paid. Once the application fee are paid, candidates receive a confirmation email at their registered email address confirming the payment of fees. 

HBTU Kanpur offers a two-year M.Tech course spread across four semesters. Candidates can apply for M.Tech after completing graduation. Below are some of the M.Tech specialisations offered at HBTU:

• Computer Science and Engineering
• Environmental Science and Engineering
• Power Electronics and Control
• Electronics and Communication Engineering
• Computer-Aided Design, etc.

The sanctioned seat intake for HBTU BBA is 60. Out of the total intake, some of the seats are reserved for candidates belonging to SC/ST/OBC categories. However, for admission under these seats, the relevant documents have to be submitted. Find below the details about reservation of seats:

NOTE: The reservation policy shall be governed by UP State Government or as prescribed by the university from time to time.

Candidates seeking admission to HBTU BTech course must register for the counselling by following the below mentioned steps:

Step 1: Visit the official website for HBTU Kanpur Counselling at hbtu.admissions.nic.in.

Step 2: Under the 'Candidate Activity Board', click on application.

Step 3: On the next page, Loging using JEE (Main) Application No and password.

Step 4: Also enter the security pin and submit.

Step 5: Follow the instructions and register for the HBTU BTech Counselling.

HBTU Kanpur application process is carried out in online mode. The admission form must be submitted within the due date. The step-by-step online application process is as follows:

Step 1: Visit the HBTU official website.

Step 2: Click on ‘Admission 2025-26'.

Step 3: Click on the available online registration link.

Step 4: Select ‘New Application’.

Step 5: Select the preferred course.

Step 6: Select the preferred school, and course and enter the Aadhar card number.

Step 7: Fill out the application form.

Step 8: Pay the application fee and submit the application form.

The admission procedure can vary slightly from one course to another. HBTU Kanpur admission process involves the below-mentioned steps:

STEP 1: Candidates need to register online by visiting the university official website.

STEP 2: Fill out the application form and submit it within the due date.

STEP 3: Candidates without accepted national-level exams, need to appear for the university entrance test.

STEP 4: A selection list is released for each of the course.

STEP 5: Shortlisted candidates may have to appear for group discussion and personal interview, depending upon the chosen course.

STEP 6: Seat allotment is carried out through counselling and candidates have to pay required fee for admission confirmation.

HBTU Kanpur carries out MBA admission procedure in three phases. In the first phase, applicants with a valid CAT or CUET-PG scores are shortlisted and called for group discussion and personal interview (GD & PI) round. In the second phase, candidates with a score of CMAT/AIMA-MAT/CUET-PG are called for GD & PI. If the seats are left vacant after the two phases, then the university conducts an entrance examination to fill out the vacant seats. The below-mentioned infographic presents weightage of each selection round: